Project

General

Profile

TVheadend 3.9 unstable - No Transcoding

Added by Ralf Buck almost 10 years ago

hello

ive installed the latest version from TVH from here:
deb http://apt.tvheadend.org/unstable wheezy main

HTS Tvheadend 3.9.2490~gcd1f081~wheezy

I miss in the WebGUI under Configuration/General the
Option for Transcoding. Stream without Transcoding over
WLAN isnt possible.. ;(

How can i enable this transcoding?

regard


Replies (7)

RE: TVheadend 3.9 unstable - No Transcoding - Added by Prof Yaffle almost 10 years ago

You need to compile it yourself - there is no 'enable transcoding' option as in 3.4, but the pre-built debs aren't being built with transcoding for whatever reason.

AUTOBUILD_CONFIGURE_EXTRA=--enable-libffmpeg_static ./Autobuild.sh

... should get you there once you've cloned the source.

RE: TVheadend 3.9 unstable - No Transcoding - Added by Ralf Buck almost 10 years ago

thx, but im a noob to compile tvheadend

have you a complete guide to compile tvh 3.9 with
transcoding?

RE: TVheadend 3.9 unstable - No Transcoding - Added by Ralf Buck almost 10 years ago

so, i build now my own tvheadend. but the transcoding button isnt there ;(

i had do:

  1. apt-get remove tvheadend
  2. apt-get install build-essential pkg-config libssl-dev git
  3. apt-get install libavahi-client-dev libavcodec-dev libavfilter-dev libavformat-dev libavutil-dev libswscale-dev libavcodec-extra-53 liburiparser1 liburiparser-dev debhelper libcurl4-gnutls-dev a52dec
  4. apt-get install libssl-dev
  5. cd /usr/src
  6. git clone https://github.com/tvheadend/tvheadend.git
  7. cd tvheadend
  8. AUTOBUILD_CONFIGURE_EXTRA=--enable-libffmpeg_static ./Autobuild.sh
  9. cd ..
  10. dpkg -i tvheadend_3.9.2497~g54533b3_amd64.deb

RE: TVheadend 3.9 unstable - No Transcoding - Added by alf alfonsius almost 10 years ago

3.9 works with transcoding profiles in webui --> config -->stream -->streamprofiles which you assign to user afterwards

config-profile.jpg (163 KB) config-profile.jpg config transcoding
attach.jpg (87 KB) attach.jpg attach to user

RE: TVheadend 3.9 unstable - No Transcoding - Added by Andreas Petereit almost 10 years ago

Hello Alf,
unfortunally I could not add the profile in "stream profiles" as your picture config-profile.jpg is showing.
The boxes below "Container" are missing. Is this missing due to not compiling the transcoding feature?

BR
Andreas

RE: TVheadend 3.9 unstable - No Transcoding - Added by Paul Vries over 9 years ago

I am now running an unstable installation on Ubuntu (Tvheadend 3.9.2514) and I only have 3 streaming profiles available, HTSP, Matroska and Pass. Do I need to manually build Tvheadend via the steps outlined by Ralf to be able to transcode?

If I build it myself, do I need to step 5 through 10 every time I want to update?

RE: TVheadend 3.9 unstable - No Transcoding - Added by alf alfonsius over 9 years ago

nope. in ...src/tvheadend/ git clean -dxf and then git pull. dunno about autobuild, never used that. i use configure...,make,make install

    (1-7/7)