Tvheadend

Which satellite does your dish point at?

Astra 19.2?

What does your setup look like?
All LNBs directly connected to the tuners?
Any multiswitch in between?
How about the cabling - same quality cable or any difference?

Hi
I have an Astra 19.2 System, with a 16 Port Multiswitch.
The tuner are located directly at the multiswitch, the cable length is app. 0.5 m.
All the cable are the same.

On the other multiswitch exits I have
a Topfiled Twin receiver,
a Kathrein receiver
2 Loewe TV with integrated receiver

So far all work fine.

What does following command show up:

/opt/bin/mediaclient --testastra -d /dev/dvb/adapter0/frontend0

Which LNB do you have?

what version tvheadend are you using? I'm guessing < 3.9 if so update to latest (git master is best)

Markus S
/opt/bin/mediaclient --testastra -d /dev/dvb/adapter2/frontend0 /opt/bin/mediaclient --testastra -d /dev/dvb/adapter2/frontend0
Testing Astra 19.2 Frequencies
DVBS
LO Band / 18V:
Checking for lock:
. [LOCKED]
LO Band / 13V:
Checking for lock:
. [LOCKED]
HI Band / 18V:
Checking for lock:
. [LOCKED]
HI Band / 13V:
Checking for lock:
. [LOCKED]
DVB-S2 ZDF HD / 18V
Checking for lock:
. [LOCKED]

after this my TV Shows TVHeadend "No Service enabled"

@Gary
I am using
HTS Tvheadend 3.5.247~g098b7de~wheezy

So far I am not sure how get the git master. In my sources.list I have:

deb http://apt.tvheadend.org/beta wheezy main
deb-src http://apt.tvheadend.org/beta wheezy main

How can I get the git master?

Thank you

follow this guide for master
https://tvheadend.org/projects/tvheadend/wiki/Building

or
A repository (unstable one is the one you need)
https://tvheadend.org/projects/tvheadend/wiki/AptRepository

thank you,
I was successful until Configuration
$ ./configure
Return with file or folder not found

You need to be in the directory into which you just cloned the source code. This is typically $HOME/tvheadend.

thank you,
I found it.
It is running now.
I will report....

the version 3.9.2308 is running now.
On the Web end I can see all my adapter, and I have enabled them.
Nothing happens. on the old version there was mux to be scanned. Here I see nothing.

Do I have to initiate a start somewhere else?

The console shows "tvheadend successfully established" - all in green.

you need to setup your network tab first. add your network there. (if it's astra 19.2e then don't add predefined muxes just add a mux on the mux tab with the info at the bottom)

then you setup each adaptor so they are connected to this network and at this point the network will find most if not all muxes on the sat.

you then either add channels manually or use the new bouquets tab.

Atra 19.2e mux
"frequency": 11953500,
"symbol_rate": 27500000,
"fec": "3/4",
"polarisation": "Horizontal",
"modulation": "QPSK",
"delivery_system": "SYS_DVBS",

Hi Gary,
thank you, I found it, and it is working now.
The setup is for multiple receiver a lot easier now!

I will play around with it, and report....

the tvheadend 3.9.2308 is running, and I can stream TV to my iPad.
In addition I have 2 FireTV running Kodi 14.0 Git: 2014-12-23 with tvheadend client 1.9.39.
Selecting a TV channel results in:
Tvheadend HTSP Client:
- Command failed: Stream Setup Error
- Disconnectd from HTS Tvheadend
- Connected to HTS Tvheadend

I have changed at the user settings the streamin from 'pass' to 'matroshka' (works best for the iPad),
but no change.

The Output of the tvheadend Server shows
2015-01-03 12:04:36.311 [ INFO] htsp: Got connection from 192.168.0.143
2015-01-03 12:04:36.311 [ INFO] htsp: 192.168.0.143: Welcomed client software$
2015-01-03 12:04:36.312 [ INFO] htsp: 192.168.0.143 [ XBMC Media Center ]: Id$
2015-01-03 12:04:36.334 [ ERROR] htsp: unable to create profile chain 'pass'
2015-01-03 12:04:36.340 [ INFO] htsp: 192.168.0.143 [ tvHO | XBMC Media Cente$
2015-01-03 12:04:36.341 [ INFO] htsp: Got connection from 192.168.0.143
2015-01-03 12:04:36.341 [ INFO] htsp: 192.168.0.143: Welcomed client software$
2015-01-03 12:04:36.342 [ INFO] htsp: 192.168.0.143 [ XBMC Media Center ]: Id$
2015-01-03 12:04:39.755 [ INFO] HTTP: 192.168.0.143: /1_0_1_3F_21_85_C00000_0$

Playback recordings works fine....

Any idea what I can do to get TV back to the TV?