Project

General

Profile

Freesat Channel Numbering

Added by Rob D almost 10 years ago

Hi All,

I'm new to TBH and because I had issues with the stable release am running 3.9.2104~gfc7e0f4~wheezy. I have the one default Astra 28.2 Network defined and the EPG is working fine but I would like to map only Freesat channels and use Freesat numbering, how do I set this up?


Replies (8)

RE: Freesat Channel Numbering - Added by Prof Yaffle almost 10 years ago

I think you want to look at setting up (or selecting) the right bouquet - I've not used it yet myself, but I believe that's what this functionality is designed for. It should be in 2104, but you may need to come more up to date to get full functionality.

RE: Freesat Channel Numbering - Added by Rob D almost 10 years ago

Thanks Prof,

I think I have found the right Bouquet for me: England HD: S East/Meridian S - 11426H in Freesat and it works! I just enabled that bouquet, stopped tvheadend, manually deleted all channels (cd /home/hts/.hts/tvheadend, rm -rf channel/config/*, rm -rf channel/tag/*, rm -rf channels/*)and started tvheadend again, it automatically mapped the right channels in a few seconds.

Any Muxes you are missing are listed in the channel list (You can pick out the channels with missing muxes).

RE: Freesat Channel Numbering - Added by Andy Lear almost 10 years ago

Hi Rob,

How did you get the Bouquet listed, I can see god knows how many Bskyb ones but the freesat ones aren't listed.

Cheers

Andy

RE: Freesat Channel Numbering - Added by Rob D almost 10 years ago

Hi Andy,

It should be multipage with the Freesat bouquets on the later pages (Page 7 0nwards for me). Otherwise make sure you have the 11426H frequency in you frequency list and Network Discovery enabled.

RE: Freesat Channel Numbering - Added by Graham Agnew about 9 years ago

Hi,

This bouquet feature looks great and I can see the one(s) I want to enable. However nothing happens for me - no channels get added when I enable. I've tried all sorts of combinations of auto-map etc. I'm running 4.1.373. Any ideas?

Cheers,
graza,

RE: Freesat Channel Numbering - Added by Mark Clarkstone about 9 years ago

Graham Agnew wrote:

Hi,

This bouquet feature looks great and I can see the one(s) I want to enable. However nothing happens for me - no channels get added when I enable. I've tried all sorts of combinations of auto-map etc. I'm running 4.1.373. Any ideas?

Cheers,
graza,

Try checking "Map Zero Numbers" & then play the mux 11428H. With the debug panel open you should see channels being added.

RE: Freesat Channel Numbering - Added by Graham Agnew about 9 years ago

Hi Mark,

Thanks, that makes sense now that I think about how the bouquet functionality must work. I was enabling it and wondering why nothing happened straight away, but nobody was watching telly. I have a Sat>IP server and one of the frontends is setup for background scanning, but maybe it doesn't get to the mux you mention...

Cheers,
graza

RE: Freesat Channel Numbering - Added by Mark Clarkstone about 9 years ago

Graham Agnew wrote:

Hi Mark,

Thanks, that makes sense now that I think about how the bouquet functionality must work. I was enabling it and wondering why nothing happened straight away, but nobody was watching telly. I have a Sat>IP server and one of the frontends is setup for background scanning, but maybe it doesn't get to the mux you mention...

Cheers,
graza

As long as you have a bouquet & "Map Zero Numbers" [this is a known bug] enabled it should have added them without the need to tune at all, I had a similar issue where not all bouquets were being found & was told (by perexg) to tune to the mux that contains the bouquets in this case the Freesat home transponder on 11428H.

I think it will trigger eventually by itself but it does take a while.

    (1-8/8)