tvheadend no services
Added by mk mkm over 10 years ago
Hi,
I'm installing a new setup with a ubuntu server 14.04 and tvheadend 3.4.28 stable and i cannot get tvheadend to get any services.
I've tried with 2 DVB-T USB tuner and it works fine on a synology with tvheadend 3.4.27-6.
I've spend several hours and i cannot make if find services.
Now when i connect the usb, i get the kernel messages :
[ 2526.753214] usb 1-6: new high-speed USB device number 2 using ehci-pci
[ 2526.886064] usb 1-6: New USB device found, idVendor=0fd9, idProduct=0011
[ 2526.886069] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2526.886072] usb 1-6: Product: EyeTV Diversity
[ 2526.886075] usb 1-6: Manufacturer: Elgato
[ 2526.886077] usb 1-6: SerialNumber: 130604001779
[ 2526.918018] dvb-usb: found a 'Elgato EyeTV Diversity' in cold state, will try to load a firmware
[ 2526.918444] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 2527.119820] dib0700: firmware started successfully.
[ 2527.621328] dvb-usb: found a 'Elgato EyeTV Diversity' in warm state.
[ 2527.621377] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 2527.621595] DVB: registering new adapter (Elgato EyeTV Diversity)
[ 2527.860604] usb 1-6: DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
[ 2528.080489] DiB0070: successfully identified
[ 2528.080493] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 2528.080612] DVB: registering new adapter (Elgato EyeTV Diversity)
[ 2528.232675] usb 1-6: DVB: registering adapter 2 frontend 0 (DiBcom 7000PC)...
[ 2528.452551] DiB0070: successfully identified
[ 2528.481348] Registered IR keymap rc-dib0700-nec
[ 2528.481439] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/rc/rc0/input13
[ 2528.481637] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/rc/rc0
[ 2528.481798] dvb-usb: schedule remote query interval to 50 msecs.
[ 2528.481803] dvb-usb: Elgato EyeTV Diversity successfully initialized and connected.
[ 2528.481953] usbcore: registered new interface driver dvb_usb_dib0700
So everything seems to be fine for the USB tuner but tvheadend didn't find any signal.
Here is a link of my setup is someone want to see some details :
http://86.71.61.19:9981
user: tvheadendclient
pass: tvheadend
The DVB-T adapter is a Dual Tuner USB Elgato EyeTV Diversity called DiBcom 7000PC.
There is 2 instances on /dev/dvb/adapter1 and adapter2
Thanks
Mika
Replies (9)
RE: tvheadend no services - Added by Prof Yaffle over 10 years ago
I've adjusted the muxes for you by hand (again - I'll send you a bill next time :-) ) and it's scanning now - 96 services so far.
When that's complete, you can delete or disable the muxes you don't need, since you have 40+ defined. And then copy the remaining muxes over to the other adapter
RE: tvheadend no services - Added by mk mkm over 10 years ago
Thank you again.
Now i've understand what you changed in muxes for my DVB-T.
I have the similar problem on the tuner DVB-S STB0899 Multistandard, but i've tried to add muxes manually but nothing happends when i click "Add" after filling the frequency,symbolrate, ...
Example on my current satellite Hotbird 13°:
channel ARTE : 11681.00 H DVB-S2 8PSK 27500 3/4
Is it normal that i can't add manually ?
Thanks again.
RE: tvheadend no services - Added by Mark Clarkstone over 10 years ago
mk mkm wrote:
Thank you again.
Now i've understand what you changed in muxes for my DVB-T.
I have the similar problem on the tuner DVB-S STB0899 Multistandard, but i've tried to add muxes manually but nothing happends when i click "Add" after filling the frequency,symbolrate, ...
Example on my current satellite Hotbird 13°:
channel ARTE : 11681.00 H DVB-S2 8PSK 27500 3/4Is it normal that i can't add manually ?
Thanks again.
I've tried adding that mux you mentioned and it still isn't working, could you run something like w_scan (should be in your dists repo as wscan or w_scan or even w-scan..) and see if that finds anything (it should blurt out sat info and print if the signal is okay)
Edit: Leaving your login details here isn't such a good idea either and I really recommend you change them ASAP!
RE: tvheadend no services - Added by mk mkm over 10 years ago
Hi,
I will try thanks.
How do you manage to add manually the line, nothing happends for me when i click add.
Thanks
Mickael
RE: tvheadend no services - Added by Prof Yaffle over 10 years ago
It should simply be a case of clicking 'add' and entering the details - no, it's not normal for it to do nothing.
Open up your port forwarding again and I'll take a look tomorrow if you like. Otherwise, post some screenshots of your adapter config and I'll see if there's anything obvious.
RE: tvheadend no services - Added by mk mkm over 10 years ago
Hi Again,
When i click add at the bottom, nothing happends. It worked with my DVB-T cart but with the DVB-S cart it won't work.
I've tried with Chrome and firefox. I've tried to disable the cart and try again, same problem.
No information show on the debug mode
Sans titre-1.jpg (87.7 KB) Sans titre-1.jpg |
RE: tvheadend no services - Added by mk mkm over 10 years ago
Hi,
For now i manage to get channels with the defaults multiplexes. So i'm ok.
But i still can't add manually multiplexes.
RE: tvheadend no services - Added by Prof Yaffle over 10 years ago
The jpg shows that the symbolrate is wrong (the red line). It's in baud, not kilobaud, so you'd expect a much bigger number than that; look at the auto muxes to see what values they have.