Project

General

Profile

Forums » General »

problems adding iptv mux

Added by alf alfonsius almost 11 years ago

i am having trouble adding muxes with 1 service :(
initial scan gives error:

2013-12-20 09:15:10.871 mpegts: udp://239.20.20.7:5555 - starting for 'initscan' (weight 2)
2013-12-20 09:15:10.871 mpegts: udp://239.20.20.7:5555 - tuning on IPTV
2013-12-20 09:15:10.871 subscription: 'initscan' subscribing to mux, weight: 2, adapter: 'IPTV', network: 'IPTV Network', mux: 'udp://239.20.20.7:5555'
2013-12-20 09:15:11.232 eit: invalid tsid found tid 0x4E, onid:tsid 65535:65535 != 2048:2701
2013-12-20 09:15:11.721 eit: invalid tsid found tid 0x4E, onid:tsid 65535:65535 != 2048:2701
2013-12-20 09:15:40.000 mpegts: udp://239.20.20.7:5555 - initial scan timed out
2013-12-20 09:15:40.000 mpegts: udp://239.20.20.7:5555 - initial scan complete
2013-12-20 09:15:40.000 subscription: "initscan" unsubscribing

version: HTS Tvheadend 3.9.288~g89d7bb3-dirty on debian jessie kernel 3.12.0 x86_64

muxes 229.1.1.x needed manual config to work, the 229.1.2.10 comes from vlc and works normal on auto service

muxes.jpg (90.3 KB) muxes.jpg muxes
dump-alj1.ts (17.9 MB) dump-alj1.ts testdump same mux

Replies (3)

RE: problems adding iptv mux - Added by Adam Sutton almost 11 years ago

I'll yet and take a look at this, thanks for the muxdump.

Adam

RE: problems adding iptv mux - Added by Adam Sutton almost 11 years ago

OK,

can you clarify what exactly the issue is? I can see it's timing out, but does it actually find the service? I put the mux through the tsfile input and it found JSC Sports +1. The strange thing is its a pretty complete signal, it even has NIT and SDT in it.

The invalid TSID message can be safely ignored and I really need to hide those. The only thing concerning me is that it timed out for you, which it should not have done.

Adam

RE: problems adding iptv mux - Added by alf alfonsius almost 11 years ago

the initial scan is not finding any services (network/tsID keeps staying at 65535) so i cant map. the mux i edited manually had found atleast tsID so UUID was created in folder.if i can figure out how to create those uuid's i could try manualy since i have all the pids

muxes2.png (203 KB) muxes2.png muxes working/partial/none
    (1-3/3)