Project

General

Profile

Rasperry pi open elec

Added by Anonymous almost 10 years ago

Hello,

I have a raspberry pi b+, witch openelec 5.0.0.

Only i have a problem witch openelec end tvheadened.
If i open 192.168.11.24:9981 thats the ip from the raspberry pi end openelc its not possible to open this page hi give a error.

I have a tvheadend version 1.0.0, only i can not update in the addon menu.
End if i go to ssh end try sudo isnt this not possible?

How can i repair this issieu?

Robin


Replies (6)

RE: Rasperry pi open elec - Added by Daisy Reiss almost 10 years ago

Hi Robin,
I guess, you mixed up 2 things. you probably have "tvheadend kodi plugin 1.0.0" inside your XBMC/KODI. This is kind of "front end".
But you did not yet have installed tvheadend "back end" itself.
The version would look like "HTS Tvheadend 3.9.2407~gabea248". Should allways be 3.x version.

Don't knowing OpenElec (I used the backend under raspbmc) , I would point you to ask in a OpenELEC forum, if and how you can install Tvheadend 3.x backend. Answers could look like

ssh or putty 192.168.11.24
sudo apt-get update
sudo apt-get install tvheadend

If so, do it and come back with your next questions ;)

HTH,
Daisy

RE: Rasperry pi open elec - Added by Prof Yaffle almost 10 years ago

I think OpenElec ships with two addons:

1. The PVR frontend (so the normal Kodi addon)

2. The tvheadend backend software (3.9.x)

You need to install both unless you have a separate tvheadend/backend server.

You can't use sudo or apt-get to update anything on OE; instead, you'll nee to build/find a replacement addon that can be installed from a .zip file.

RE: Rasperry pi open elec - Added by Raymond Paulsen almost 10 years ago

please note that tvheadend backend has been moved from official to unofficial repository in OE a copuple a days ago.

RE: Rasperry pi open elec - Added by Anonymous almost 10 years ago

Hello,

Thank you for helping my only openelec has not exept the sudo ssh command.
Now i try xbian its work a lot better!

Thx,

Robin

RE: Rasperry pi open elec - Added by Anonymous over 9 years ago

Hello,

I have will work witch a dvb-t usb only it will not working i think its because holland wil not work anymore witch dvb-t.

Now i want to try working witch a usb witch card reader.

But i can not found one that will working only the alysee e30 but that are not making anymore.

Thank you.

Robin

RE: Rasperry pi open elec - Added by Daisy Reiss over 9 years ago

Robin Kaashoek wrote:

Hello,

I have will work witch a dvb-t usb only it will not working i think its because holland wil not work anymore witch dvb-t.

Now i want to try working witch a usb witch card reader.

But i can not found one that will working only the alysee e30 but that are not making anymore.

Thank you.

Robin

Hi Robin,
I believe you mean "AnySee E30 DVB-T tuner", right? Alysee is a Car.

On Wikipedia, I found this: "The national public television channels NPO 1, NPO 2, NPO 3 have been free until August 1, 2014 free-to-air. The regional public television channels are still available."
So you should at least be able to get something via DVB-T stick. If I were you, I would first try to get the free to air stuff working, even if they are broadcasting only shit. Then, I would know if my setup and my antenna and all the stuff is well. Finally, I'd rig up the equipment with an additional receiver (the one with SmartCard decoder reader), while trying to borrow a smartcard from friends or family. If this works, I'd purchase an own smartcard and done.

Even is AnySee is a cable tuner and you plan to switch over to DVB-C, I'd do the above named steps...

HTH,
Daisy

    (1-6/6)