Tvheadend

Upgrade to latest at first. There are many corrections.

Jaroslav Kysela wrote:

Upgrade to latest at first. There are many corrections.

I had upgraded to the latest, however, not all my muxes are found automatically, like they use to. Where I add one mux and it would through discovery find the remaining muxes, itself. Here I am having to add each mux one by one.

I'll raise test it with the few muxes I know and report back regarding the OTA issue and raise a new issue for mux discovery.

Network discovery is broken
https://tvheadend.org/issues/5486

Stephan Mees wrote:

Network discovery is broken
https://tvheadend.org/issues/5486

Thanks for the information, hopefully that gets fixed soon. My OTA EIT grabber issue still remains with any version.

Could you give me the log when you start tvh / play one channel for a minute / shutdown tvh ? Keep tbl-eit tracing on.

I tried to fix this in v4.3-1730-g8818b5220 . If it does not work, please, check your muxes - set the EPG grabber to auto and try again.

@M Fizz
I build a new version of the Tvh addon with the fix included - so pls have a look at the usual location for an recent version.

Jaroslav Kysela wrote:

I tried to fix this in v4.3-1730-g8818b5220 . If it does not work, please, check your muxes - set the EPG grabber to auto and try again.

@cvh thanks for that I have installed it.

Unfortunately no OTA or EIT grabbers are available.

Fixed in #5503 .

Thank you, with only UK Cable enabled it is downloading the EPG alone. I am wondering though how come it only downloads 12 hours of epg. I know it has over 7 days worth in there?

In addition looking at what you've added, I can see that you have set the nbid. Whilst it will work for me, I suspect it may not work for others there are many different network id's depending on the location in the country. Would it not be possible to use the network ID from the network id field part of "networks"?

Alternatively, I could find all the possible network id's to add

Jaroslav Kysela wrote:

I'd like to detect the specific grabber by at least two numbers (tsid, onid, nbid).

In that case, I can give you both onid and nbid.

Here are all the nbid I can find:

00001, 00002, 00003, 00004, 00005, 00006, 00007, 00008, 00009, 00010, 00011, 00012, 00013, 00014, 00015, 00016, 00017, 00018, 00019, 00020, 00021, 00022, 00023, 40961, 40962, 40963, 40964, 40965, 40966, 40967, 40968, 40969, 40970, 40971, 40973, 40974, 40975, 40976, 40977, 40978, 40979, 40980, 40981, 40982, 40983, 40984, 40985, 40986, 40987, 40988, 40990, 40995, 40998, 40999, 41003, 41008, 41009, 41011, 41013, 41015, 41016, 41018, 41020, 41026, 41040, 41041, 41042, 41043, 41044, 41045, 41046, 41048, 41049, 41050, 41051, 41052, 41053, 41054, 41055, 41056, 41059, 41060, 41061, 41063, 41064, 41065, 41066, 41067, 41068, 41069, 41071

Looking at the onid most almost 95% are F020 which is line with the current setting of 61472. If it doesn't satisfy some areas, they wil just have to let you know about their onid to add.

I don't know why only 12 hours of EPG are detected. Perhaps, there's also another table?

The way i think it works is that all EPG for all services is transmitted on particular channels. I managed to get it up to 3 days by tuning into one of these said channels which i think may have triggered it. I don't think tvh needs to be scanning continously on various different frequencies.

M Fizz wrote:

Thank you, with only UK Cable enabled it is downloading the EPG alone. I am wondering though how come it only downloads 12 hours of epg. I know it has over 7 days worth in there?

In addition looking at what you've added, I can see that you have set the nbid. Whilst it will work for me, I suspect it may not work for others there are many different network id's depending on the location in the country. Would it not be possible to use the network ID from the network id field part of "networks"?

Alternatively, I could find all the possible network id's to add

On my network nbid 40985, transponder 1's mux 595 Mhz carries the longer epg.

once i changed the 41015 to 40985 the epg was populated.

Alex Mills wrote:

once i changed the 41015 to 40985 the epg was populated.

How many days are you getting? Can you try mux 603 see if you get any more?

M Fizz wrote:

Alex Mills wrote:

once i changed the 41015 to 40985 the epg was populated.

How many days are you getting? Can you try mux 603 see if you get any more?

nah its the same, many moons ago there was a channel called PVR_EPG which gave a longer epg but thats no longer present here.

M Fizz wrote:

Alex Mills wrote:

once i changed the 41015 to 40985 the epg was populated.

How many days are you getting? Can you try mux 603 see if you get any more?

hi i've retested 603 Mhz Mux and i just get 48hrs worth of EPG.

where as on 595 Mhz mux i get ~ 5 days worth of EPG, i usually only have this mux enabled for EPG scan.

Hi, forgot to ask if you get serial and episode data for any of the epg entries from cable uk ?

Alex Mills wrote:

Hi, forgot to ask if you get serial and episode data for any of the epg entries from cable uk ?

I only get ~3/4 days worth. Serial and episode data, I assume you mean if it is a weekly show it describes what is going to happen in this episode, then yes I get it.

Hello. I am trying to use the cable UK grabber with no luck.
I am running 4.3-1854~gfda89e85e.
The grabber doesn't get picked and I get no channel numbers.
Reading above, it sounds like it might work with ALL other grabbers disabled?
Not an option for me. I connect to multiple satellites and OTA too.

Any help is appreciated.
Chris