Project

General

Profile

Bug #4497

Rotor *weirdness* when tuning is not complete

Added by Nicolas C over 7 years ago. Updated over 7 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
2017-07-23
Due date:
% Done:

0%

Estimated time:
Found in version:
4.3-295~ga9dffb7
Affected Versions:

Description

I've found this issue in two different occasions, but it might be related to the same thing:
- Sometimes, when a service is tuned, the rotor will go to the right position. Now if that channel cannot be properly tuned (for example, due to low signal), upon changing the channel the rotor won't switch to another orbital position.

- Other times, when epggrab is running on one orbital position, upon tuning a Service in another one, TVH will try to tune but not move the rotor.

I've tried to reproduce these with strange results, and I'm pretty sure the problem here goes back to using an orbital position with Low signal, once the dish is realigned everything seems to work fine.

History

#1

Updated by Jaroslav Kysela over 7 years ago

Please, give more details. A commented log for --trace service,subscription,linuxdvb,diseqc might help to identify the issue. https://tvheadend.org/projects/tvheadend/wiki/Traces

#2

Updated by Nicolas C over 7 years ago

I was able to replicate the error
In this case epggrab was attempting to run and kind of locking the input. It seems like epggrab has a higher priority that an actual service subscription.

Jul 28 21:52:56 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 06 => 2
Jul 28 21:52:56 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 08 => 29900000
Jul 28 21:52:56 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 09 => 3
Jul 28 21:52:56 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 04 => 0
Jul 28 21:52:56 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 13 => 0
Jul 28 21:52:56 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 01 => 0
Jul 28 21:52:56 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:58 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:52:59 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:00 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 2 (0003)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:01 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:02 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 2 (0003)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:03 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:04 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 2 (0003)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 2 (0003)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:05 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status BAD (SIGNAL | CARRIER)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status FAINT (SIGNAL)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - checking FE status (ready)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - status 3 (0001)
Jul 28 21:53:06 localhost.localdomain tvheadend18781: service: 10723H in Hotbird: Status changed to [CA check] [Graceperiod expired] [Data timeout]
Jul 28 21:53:06 localhost.localdomain tvheadend18781: mpegts: 10723H in Hotbird - scan no data, failed
Jul 28 21:53:06 localhost.localdomain tvheadend18781: subscription: 014B: "scan" unsubscribing
Jul 28 21:53:06 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - stopping 10723H in Hotbird
Jul 28 21:53:07 localhost.localdomain tvheadend18781: subscription: 0154: creating subscription for service 12054H in Eutelsat 9B weight 4 using profile <none>
Jul 28 21:53:07 localhost.localdomain tvheadend18781: subscription: 0154: find instance for 12054H in Eutelsat 9B weight 4
Jul 28 21:53:07 localhost.localdomain tvheadend18781: service: 4: 12054H in Eutelsat 9B si 0x7f5ef8006140 Conexant CX24117 Rotor: DVB-S #1 weight 0 prio 30 error 0
Jul 28 21:53:07 localhost.localdomain tvheadend18781: service: will start new instance 4
Jul 28 21:53:07 localhost.localdomain tvheadend18781: service: starting 12054H in Eutelsat 9B
Jul 28 21:53:07 localhost.localdomain tvheadend18781: mpegts: 12054H in Eutelsat 9B - tuning on Conexant CX24117 Rotor: DVB-S #1
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: Conexant CX24117 Rotor: DVB-S #1 - frontend clear
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: tuner Conexant CX24117 Rotor: DVB-S #1 tuning to DVB-S2 9.0E freq 12054000 H sym 27500000 fec AUTO mod PSK/8 roff AUTO is_id -1 pls_mode ROOT pls_code 1 (freq 1454000)
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 17 => 6
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 03 => 1454000
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 06 => 2
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 08 => 27500000
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 09 => 9
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 04 => 9
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 12 => 2
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 13 => 3
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 42 => 4294967295
Jul 28 21:53:07 localhost.localdomain tvheadend18781: linuxdvb: S2CMD 01 => 0
Jul 28 21:53:07 localhost.localdomain tvheadend18781: diseqc: initial tone off
Jul 28 21:53:07 localhost.localdomain tvheadend18781: diseqc: initial sleep 100ms
Jul 28 21:53:08 localhost.localdomain tvheadend18781: diseqc: site: lat 52.0000, lon 0.2000, alt 0.0000; sat lon 9.0000
Jul 28 21:53:08 localhost.localdomain tvheadend18781: diseqc: rotor angle azimuth 168.8787 elevation 30.0033
Jul 28 21:53:08 localhost.localdomain tvheadend18781: diseqc: rotor USALS goto 9.0E (motor 9.7 clockwise)
Jul 28 21:53:08 localhost.localdomain tvheadend18781: diseqc: sending diseqc (len 5) E0 31 6E E0 9B
Jul 28 21:53:08 localhost.localdomain tvheadend18781: diseqc: waiting 16 seconds to finish setup for USALS
Jul 28 21:53:08 localhost.localdomain tvheadend18781: subscription: 0154: linking sub 0x7f5ef800e750 to svc 0x7f5ef8005b50 type 1
Jul 28 21:53:08 localhost.localdomain tvheadend18781: subscription: 0154: "epggrab" subscribing to mux "12054H", weight: 4, adapter: "Conexant CX24117 Rotor: DVB-S #1", network: "Eutelsat 9B", service: "Raw PID Subscription"

After a few attempts it worked fine.

#3

Updated by Jaroslav Kysela over 7 years ago

I assume that the first lines from log are describing the regular service subscription. As you see, the signal is weak, so tvh will abort this subscription (no data) and continues with the EPG scan. You may check, if the rotor parameters are correct.

Also available in: Atom PDF