Tvheadend

tried latest master, tvh updated 4/1/2013 around 9:30 pm. one of the tunner still cant zap channel
http://paste.ubuntu.com/1497438/

for me latest working version 3.3.200~ga420c83 start working imadiately after swappend back.

todays try 3.3.257~gcb83243

removed some muxers to see what happend when i copy them from other adapter

Jan 06 21:13:05 dvb: "/dev/dvb/adapter0" tuning via s2api to "Sky: 11,785,000 kHz Horizontal (hotbird13)" (1185000, 29900000 Baud, 3/4, SYS_DVBS2, PSK_8) for Initial autoscan
Jan 06 21:13:10 dvb: "Sky: 11,785,000 kHz Horizontal (hotbird13)" on adapter "Tunner 1 strana od nas", status changed to No signal
Jan 06 21:13:25 dvb: "/dev/dvb/adapter0" tuning via s2api to "TSA EuroTV2: 11,727,000 kHz Vertical (hotbird13)" (1127000, 27500000 Baud, 3/4, SYS_DVBS, QPSK) for Initial autoscan
Jan 06 21:13:31 dvb: "TSA EuroTV2: 11,727,000 kHz Vertical (hotbird13)" on adapter "Tunner 1 strana od nas", status changed to No signal

No signal, but in older version its working

Jan 06 21:31:23 subscription: "serviceprobe" direct subscription to adapter: "Tunner 1 strana od nas", network: "ASTRA 1", mux: "ASTRA 1: 12,012,000 kHz Vertical (astra19)", provider: "", service: "CANAL+ CINEMA HD", quality: 100
Jan 06 21:31:33 subscription: "serviceprobe" unsubscribing
Jan 06 21:31:33 capmt: Removing CAPMT Server from service
Jan 06 21:31:33 serviceprobe: CANAL+ CINEMA HD: skipped: No input detected
Jan 06 21:31:33 serviceprobe: CANAL+ CINEMA HD: checking...
Jan 06 21:31:33 capmt: Starting capmt server for service "CANAL+ CINEMA HD" on tuner 0
Jan 06 21:31:33 subscription: "serviceprobe" direct subscription to adapter: "Tunner 1 strana od nas", network: "ASTRA 1", mux: "ASTRA 1: 12,012,000 kHz Vertical (astra19)", provider: "", service: "CANAL+ CINEMA HD", quality: 100
Jan 06 21:31:43 subscription: "serviceprobe" unsubscribing
Jan 06 21:31:43 capmt: Removing CAPMT Server from service
Jan 06 21:31:43 serviceprobe: CANAL+ CINEMA HD: skipped: No input detected
Jan 06 21:31:43 serviceprobe: CANAL+ FAMILY HD: checking...
Jan 06 21:31:43 capmt: Starting capmt server for service "CANAL+ FAMILY HD" on tuner 0
Jan 06 21:31:43 subscription: "serviceprobe" direct subscription to adapter: "Tunner 1 strana od nas", network: "ASTRA 1", mux: "ASTRA 1: 12,012,000 kHz Vertical (astra19)", provider: "", service: "CANAL+ FAMILY HD", quality: 100

no input detected on mapping, but quality 100

well adam how can i help you to reproduce the problem?

http://paste.ubuntu.com/1517284/
looks to be,bisect used, last working without a problem is HTS Tvheadend 3.3.203~g99b69cb

could opentv module block whole adapter when mux where epg should be is faint/bad?
mean on tvheadend start, opentv want to access mux /11881 on hot13 for sky ita/ and after mux is faint/bad tvh stuck there and wont allow start anything in that adapter?

Vojtech,

Sorry but can you just re-test this, I'm not aware of any specific fixes for this. But a few things have been fixed since you last reported it, so I'd like to double check its still happening before investigating.

Adam

well can try it, till now i was on ce67dd9, will test latest master & report later

This "might" relate to a problem I saw a long time ago when I first added the close fds on idle option. I found that broke my TBS6981 and so I made the close fds optional. But this only happened if I was actively closing/reopening the adapters during operation. As long as I opened them one at a time at startup and then kept things open all was fine (which is basically the way TVH works without that option).

But I think you're saying you've enabled both adapters and then restarted? What happens if you disable both adapters, while running, and then re-enable just the one that was failing?

I'm really lost as to what is going on.

Adam

Could be, seems to be that initial scan/idle scanning makes troubles, with initial scan off, and idle scanning off, muxes are stable, and i didnt find any faint/no signal mux for a longer time, and also recording on both tunners is working ok at the moment.

i didnt ment enabling adapters, just enabling/disabling setting on enabled adapter :
A0 initial scan off, idle scanning off
A1 initial scan on, idle scanning on
muxes scanned ok, blank services filled up with channel names etc.

A0 changed to initial scan on, idle scanning on

service tvheadend stop/start

A0 scanning ok
A1 dead

coudl try later if disabling/enabling dead adapter A1 will sort it out.

thx adam

That last comment is perfectly valid, muxes contain information relating to other muxes in the network not just themselves. Whether what it actually did is correct is another matter.

I need to find some time to look at this, there have been various issues reported recently (many related to the TBS 6984).

Adam

if i can help let me know

at the moment im leaving :
A0 initial scan off, idle scanning off
A1 initial scan off, idle scanning off

with that setting its allright, can watch and record.