Tvheadend

Can you check if you have the same transponder listed twice (on the same adapter) with slightly differing frequency?

This is a common problem which I've been sweeping under the carpet, because I plan to restructure all the DVB code in 3.4. However I may just have to bite the bullet and fix this for 3.2.

Adam

Thanks for the quick response!

Yes, that is the case. I have 11,766,000kHz V (should be the one I have added) and 11,765,840kHz V (same info as 11,766, signal 100%) and 11,765,840kHz H (no signal).

Also I've just tried a scan with w_scan and the services are found correctly.

Yeah, its a problem with the way TVH manages muxes. In fact it causes several other related issues, which is why I plan to do a massive shake-up in 3.4.

There is a workaround, but it's not great and requires too much user interaction. So I will look at a temporary fix to overcome the problem.

Until then, try disabling auto mux discovery. And delete 1 of the 2 muxes (it probably doesn't matter which) it should eventually sort itself out. Don't re-enable auto discovery it may bugger it up again.

Adam

Thanks, it worked. I deleted the two muxes at 11.765.840 and disabled autodiscovery.
There's one other small problem though, may be related so I write it here: one service appeared with a wrong name (Rai 4 instead of Rai 5, so I found two Rai 4 entries in my list, the correct one and Rai 5), but plays perfectly.

If you need more info/help about this problem let me know, I'll be glad to help.