Post processing does not work in non-default recording configuration

Added by Pieter Hooftman about 11 years ago

Hi, i'm new to the forums. I'm running TVHeadend 3.4.27-6 on a Synology DS412+ Diskstation.

TvHeadend is recording fine from my DVB-C feed , using an Ansysee E30TC USB tuner, but the post processing command is only run when the default recording configuration is used. When i use a non-default Digital Video Recorder configuration, the post processing command doesn't seem to be started at all. See attachment for both configurations.

Does anyone have an explination why the post prcessing command only kicks in when using the default recording configuration?

FYI, the way i schedule recordings is using the Polini webinterface, Listing View. When an entry in the EPG is clicked, a pull-down menu is displayed where i can select the configuration (see attached screenshot)

Thanks!

screenshot.png (21.9 KB) screenshot.png
2013-10-08 23_30_09-General - Tvheadend.png (32 KB) 2013-10-08 23_30_09-General - Tvheadend.png

Replies (3)

RE: Post processing does not work in non-default recording configuration - Added by Prof Yaffle about 11 years ago

What does it look like in the tvheadend web interface? Any clues there?

RE: Post processing does not work in non-default recording configuration - Added by Pieter Hooftman about 11 years ago

Hi, no clues. If i schedule 2 recordings via the Polini webinterface, one with the configuration 'default' and one with "config30min_extra", those scheduled recordings show up fine in the Upcoming recordings list, and the configurations which i schedueld them with show properly, exactly the same as if i enter the recordings via the Tvheadend webinterface.

RE: Post processing does not work in non-default recording configuration - Added by Pieter Hooftman about 11 years ago

Reply to my own post; without changing any settings, post processing now works for non-default recording schedules also ...

(1-3/3)

Project

General

Profile

Tvheadend