[Solved]TVHeadend problems with DVB-S2 on QNAP
Added by Thomas Winkler over 11 years ago
Hi,
I have some Problems running TVHeadend with DVB-S2 Support on my Intel Atom based QNAP NAS and need some help.
The Facts:
QNAP NAS Model: TS-469U-SP
Kernel Version: 3.4.6
TVHeadend Version: HTS Tvheadend 3.5.201~g2a9ccdd-dirty
DVB-S2 Device: PCTV DVB-S2 Stick 460e (USB)
LNB-Type: Universal
Sat-Config: Astra 19,2
First of all I will explain what I have done so far.
There still exists a Third-Party QNAP Application (QPKG) provided by "virtualdj" which enables TVHeadend on QNAP NAS Servers. So I have installed the QPKG.
To be able to use my DVB-S2 USB Device i needed working Kernel Modules so I found them in DVBLogics TVSource Package which are built for Kernel Version 3.4.6. I know that they are working because I can use it on DVBLink TVSource to scan for Services.
After loading the Modules and starting TVHeadend i reconized that I can only use DVB-S Features. I can scan for Services and watch them but only DVB-S.
So after some Research on the Internet i found the reason here on this Forum:
https://tvheadend.org/boards/4/topics/7408
I have asked virtualdj to compile a new binary with replaced the Header files listed in this Topic and got a new binary Version. I have also compiled another binary on the QNAP itself but the result is the same:
I now can set Muxxes for DVB-S2 Support (PSK_8, etc) but if I try to make a Mux Scan i got following error (complete debug log with a clean config at beginning):
Jun 10 19:09:04.006 [ INFO] charset: 119 entries loaded Jun 10 19:09:04.006 [ ALERT] dvb: /dev/dvb/adapter0/frontend0: unable to open (err=Device or resource busy) Jun 10 19:09:04.007 [ INFO] dvb: Found adapter /dev/dvb/adapter8 (NXP TDA10071) via PCI Jun 10 19:09:04.010 [ INFO] v4l: /dev/video0: em28xx PCTV DVB-S2 Stick (460e) usb-0000:00:1d.7-5 capabilities: 0x05000041 Jun 10 19:09:04.010 [ INFO] v4l: /dev/video0: Standard #0: 000000000000b000 NTSC, frameperiod: 1001/30000, 525 lines Jun 10 19:09:04.010 [ INFO] v4l: /dev/video0: Standard #1: 0000000000001000 NTSC-M, frameperiod: 1001/30000, 525 lines Jun 10 19:09:04.011 [ INFO] v4l: /dev/video0: Standard #2: 0000000000002000 NTSC-M-JP, frameperiod: 1001/30000, 525 lines Jun 10 19:09:04.011 [ INFO] v4l: /dev/video0: Standard #3: 0000000000008000 NTSC-M-KR, frameperiod: 1001/30000, 525 lines Jun 10 19:09:04.011 [ INFO] v4l: /dev/video0: Standard #4: 0000000000004000 NTSC-443, frameperiod: 1001/30000, 525 lines Jun 10 19:09:04.011 [ INFO] v4l: /dev/video0: Standard #5: 00000000000000ff PAL, frameperiod: 1/25, 625 lines Jun 10 19:09:04.011 [ INFO] v4l: /dev/video0: Standard #6: 0000000000000007 PAL-BG, frameperiod: 1/25, 625 lines Jun 10 19:09:04.011 [ INFO] v4l: /dev/video0: Standard #7: 0000000000000008 PAL-H, frameperiod: 1/25, 625 lines Jun 10 19:09:04.011 [ INFO] v4l: /dev/video0: Standard #8: 0000000000000010 PAL-I, frameperiod: 1/25, 625 lines Jun 10 19:09:04.011 [ INFO] v4l: /dev/video0: Standard #9: 00000000000000e0 PAL-DK, frameperiod: 1/25, 625 lines Jun 10 19:09:04.011 [ INFO] v4l: /dev/video0: Standard #10: 0000000000000100 PAL-M, frameperiod: 1001/30000, 525 lines Jun 10 19:09:04.011 [ INFO] v4l: /dev/video0: Standard #11: 0000000000000200 PAL-N, frameperiod: 1/25, 625 lines Jun 10 19:09:04.012 [ INFO] v4l: /dev/video0: Standard #12: 0000000000000400 PAL-Nc, frameperiod: 1/25, 625 lines Jun 10 19:09:04.012 [ INFO] v4l: /dev/video0: Standard #13: 0000000000000800 PAL-60, frameperiod: 1001/30000, 525 lines Jun 10 19:09:04.012 [ INFO] v4l: /dev/video0: Standard #14: 0000000000ff0000 SECAM, frameperiod: 1/25, 625 lines Jun 10 19:09:04.012 [ INFO] v4l: /dev/video0: Standard #15: 0000000000010000 SECAM-B, frameperiod: 1/25, 625 lines Jun 10 19:09:04.012 [ INFO] v4l: /dev/video0: Standard #16: 0000000000040000 SECAM-G, frameperiod: 1/25, 625 lines Jun 10 19:09:04.012 [ INFO] v4l: /dev/video0: Standard #17: 0000000000080000 SECAM-H, frameperiod: 1/25, 625 lines Jun 10 19:09:04.012 [ INFO] v4l: /dev/video0: Standard #18: 0000000000320000 SECAM-DK, frameperiod: 1/25, 625 lines Jun 10 19:09:04.012 [ INFO] v4l: /dev/video0: Standard #19: 0000000000400000 SECAM-L, frameperiod: 1/25, 625 lines Jun 10 19:09:04.012 [ INFO] v4l: /dev/video0: Standard #20: 0000000000800000 SECAM-Lc, frameperiod: 1/25, 625 lines Jun 10 19:09:04.012 [ INFO] v4l: /dev/video0: Format #0: 16 bpp YUY2, 4:2:2, packed [YUYV] Jun 10 19:09:04.021 [ INFO] v4l: /dev/video0: Format #1: 16 bpp RGB 565, LE [RGBP] Jun 10 19:09:04.021 [ INFO] v4l: /dev/video0: Format #2: 8 bpp Bayer BGBG..GRGR [BA81] Jun 10 19:09:04.021 [ INFO] v4l: /dev/video0: Format #3: 8 bpp Bayer GRGR..BGBG [GRBG] Jun 10 19:09:04.021 [ INFO] v4l: /dev/video0: Format #4: 8 bpp Bayer GBGB..RGRG [GBRG] Jun 10 19:09:04.021 [ INFO] v4l: /dev/video0: Format #5: 12 bpp YUV411 [411P] Jun 10 19:09:04.021 [WARNING] v4l: /dev/video0: Device does not have a tuner, device skipped Jun 10 19:09:04.024 [ ALERT] v4l: Unable to open /dev/video1 -- No such device or address Jun 10 19:09:04.026 [ ALERT] v4l: Unable to open /dev/video2 -- No such device or address Jun 10 19:09:04.028 [ ALERT] v4l: Unable to open /dev/video3 -- No such device or address Jun 10 19:09:04.030 [ ALERT] v4l: Unable to open /dev/video4 -- No such device or address Jun 10 19:09:04.032 [ INFO] CSA: Using SSE2 128bit parallel descrambling Jun 10 19:09:04.032 [ INFO] epggrab: module eit created Jun 10 19:09:04.032 [ INFO] epggrab: module uk_freesat created Jun 10 19:09:04.032 [ INFO] epggrab: module uk_freeview created Jun 10 19:09:04.032 [ INFO] epggrab: module viasat_baltic created Jun 10 19:09:04.035 [ DEBUG] opentv: dictionary skyit loaded Jun 10 19:09:04.036 [ DEBUG] opentv: dictionary skyeng loaded Jun 10 19:09:04.037 [ DEBUG] opentv: dictonaries loaded Jun 10 19:09:04.037 [ DEBUG] opentv: genre map skyuk loaded Jun 10 19:09:04.037 [ DEBUG] opentv: genre maps loaded Jun 10 19:09:04.037 [ INFO] epggrab: module opentv-ausat created Jun 10 19:09:04.038 [ DEBUG] opentv: provider ausat loaded Jun 10 19:09:04.038 [ INFO] epggrab: module opentv-skyuk created Jun 10 19:09:04.038 [ DEBUG] opentv: provider skyuk loaded Jun 10 19:09:04.038 [ INFO] epggrab: module opentv-skyit created Jun 10 19:09:04.038 [ DEBUG] opentv: provider skyit loaded Jun 10 19:09:04.038 [ DEBUG] opentv: providers loaded Jun 10 19:09:04.039 [ INFO] epggrab: module pyepg created Jun 10 19:09:04.039 [ INFO] epggrab: module xmltv created Jun 10 19:09:04.040 [ DEBUG] epggrab: using internal grab search Jun 10 19:09:04.042 [ INFO] epgdb: loaded v2 Jun 10 19:09:04.042 [ INFO] epgdb: channels 0 Jun 10 19:09:04.042 [ INFO] epgdb: brands 0 Jun 10 19:09:04.042 [ INFO] epgdb: seasons 0 Jun 10 19:09:04.042 [ INFO] epgdb: episodes 0 Jun 10 19:09:04.042 [ INFO] epgdb: broadcasts 0 Jun 10 19:09:04.043 [ INFO] dvr: Creating new configuration '' Jun 10 19:09:04.043 [WARNING] dvr: Output directory for video recording is not yet configured for DVR configuration "". Defaulting to to "/root". This can be changed from the web user interface. Jun 10 19:09:04.044 [ NOTICE] START: HTS Tvheadend version 3.5.201~g2a9ccdd-dirty started, running as PID:18236 UID:0 GID:0, settings located in '/share/MD0_DATA/.qpkg/TVHeadend/config' Jun 10 19:09:17.902 [ NOTICE] dvb: Adapter "NXP TDA10071" Enabled Jun 10 19:09:17.953 [ INFO] dvb: Adapter /dev/dvb/adapter8 will run in full mux mode Jun 10 19:09:21.142 [ NOTICE] dvb: Adapter "NXP TDA10071" mux autodiscovery set to: On Jun 10 19:09:24.519 [ NOTICE] dvb: Adapter "NXP TDA10071" quality monitoring set to: On Jun 10 19:09:33.161 [ NOTICE] dvb: New mux "12,551,500 kHz Vertical (Default (Port 0, Universal LNB))" created by built-in configuration from "dvb-s_Astra_19_2E" Jun 10 19:09:33.162 [ DEBUG] dvb: /dev/dvb/adapter8 opened frontend /dev/dvb/adapter8/frontend0 Jun 10 19:09:43.584 [ ERROR] diseqc: error trying to turn off continuous tone Jun 10 19:09:43.584 [ ERROR] dvb: diseqc setup failed -1 Jun 10 19:09:43.585 [ DEBUG] dvb: "/dev/dvb/adapter8" tuning via s2api to "12,551,500 kHz Vertical (Default (Port 0, Universal LNB))" (1951500, 22000000 Baud, 5/6, SYS_DVBS, QPSK) for Initial autoscan Jun 10 19:09:43.585 [ ERROR] dvb: "/dev/dvb/adapter8" tuning to "12,551,500 kHz Vertical (Default (Port 0, Universal LNB))" -- Front configuration failed -- Inappropriate ioctl for device, frequency: 1951500
Now I need some help to identify what the Problem is. Any idea?
Regards,
wi-tom
Replies (6)
RE: TVHeadend problems with DVB-S2 on QNAP - Added by Prof Yaffle over 11 years ago
Dumb question, but can DVBLink see the S2 muxes? Are you certain that it's tvheadend and not, say, an issue with firmware or the underlying OS?
(I know nothing about QNAP, btw, so can't help beyond the idiot questions!).
RE: TVHeadend problems with DVB-S2 on QNAP - Added by Thomas Winkler over 11 years ago
Hi,
thanks for your answer.
I know that DVBLink can see S2 muxes, scan the Network for Services, find them and can stream them.
With same modules, firmware etc. without changing the Header files I can use the Device but only with DVB-S Support. Scanning for muxxes, Services and showing streams works great - but not with changed Header files to support DVB-S2.
I think it could be also related to the s2api but I can only guess. The error message above is not descriptive enough for me. So I need some help from the community.
Best regards,
wi-tom
RE: TVHeadend problems with DVB-S2 on QNAP - Added by Thomas Winkler over 11 years ago
Here are some more Information if this would help:
dmesg (connecting USB-Device):
[195372.687933] usb 2-5: USB disconnect, device number 6 [195375.332054] usb 2-5: new high-speed USB device number 7 using ehci_hcd
dmesg (loading modules):
[195431.049548] usbcore: deregistering interface driver uvcvideo [195431.078576] media: Linux media interface: v0.10 [195431.093859] Linux video capture interface: v2.00 [195431.093870] WARNING: You are using an experimental version of the media stack. [195431.093873] As the driver is backported to an older kernel, it doesn't offer [195431.093877] enough quality for its usage in production. [195431.093880] Use it with care. [195431.093882] Latest git patches (needed if you report a bug to [email protected]): [195431.093886] d92462401dde1effa04a51d0a15000e6246d2a43 [media] v4l2-ioctl: fix W=1 warnings [195431.093890] 1b8b10cc7e6bd9bf017c58e32b1e7f632e23850d [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID [195431.093894] 8a18382c3196978164f0f6290aac98f2f6f43c00 [media] omap3isp: Fix compilation error in ispreg.h [195431.147306] WARNING: You are using an experimental version of the media stack. [195431.147312] As the driver is backported to an older kernel, it doesn't offer [195431.147316] enough quality for its usage in production. [195431.147319] Use it with care. [195431.147321] Latest git patches (needed if you report a bug to [email protected]): [195431.147325] d92462401dde1effa04a51d0a15000e6246d2a43 [media] v4l2-ioctl: fix W=1 warnings [195431.147329] 1b8b10cc7e6bd9bf017c58e32b1e7f632e23850d [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID [195431.147333] 8a18382c3196978164f0f6290aac98f2f6f43c00 [media] omap3isp: Fix compilation error in ispreg.h [195431.198675] em28xx: New device PCTV Systems PCTV 460e @ 480 Mbps (2013:024c, interface 0, class 0) [195431.198684] em28xx: DVB interface 0 found [195431.198881] em28xx #0: chip ID is em28174 [195431.505722] em28xx #0: Identified as PCTV DVB-S2 Stick (460e) (card=80) [195431.505731] em28xx #0: v4l2 driver version 0.1.3 [195431.513300] em28xx #0: V4L2 video device registered as video0 [195431.514226] usbcore: registered new interface driver em28xx [195431.530993] i2c i2c-5: a8293: Allegro A8293 SEC attached [195431.531002] DVB: registering new adapter (em28xx #0) [195431.531011] usb 2-5: DVB: registering adapter 0 frontend 0 (NXP TDA10071)... [195431.536558] em28xx #0: Successfully loaded em28xx-dvb [195431.536569] Em28xx: Initialized (Em28xx dvb Extension) extension
dmesg (starting "clean" TVHeadend):
[195530.509242] i2c i2c-5: tda10071: found a 'NXP TDA10071' in cold state, will try to load a firmware [195530.509249] i2c i2c-5: tda10071: downloading firmware from file 'dvb-fe-tda10071.fw' [195531.977242] i2c i2c-5: tda10071: firmware version 1.27.43.0 [195531.977249] i2c i2c-5: tda10071: found a 'NXP TDA10071' in warm state
dmesg does not contain any more Information also after getting the ioctl error.
Regards,
wi-tom
RE: TVHeadend problems with DVB-S2 on QNAP - Added by Thomas Winkler over 11 years ago
Next try: Don't using the kernel modules build by DVBLink.
So I have succesfully compiled the kernel modules and was able to load them (not using the media stack):
[ 641.471668] usbcore: deregistering interface driver uvcvideo [ 641.482553] Linux video capture interface: v2.00 [ 641.489110] usbcore: registered new interface driver uvcvideo [ 641.489117] USB Video Class driver (1.1.1) [ 649.703491] usbcore: deregistering interface driver uvcvideo [ 649.742288] Linux video capture interface: v2.00 [ 649.775635] usbcore: registered new interface driver uvcvideo [ 649.775643] USB Video Class driver (1.1.1) [ 649.878429] em28xx: New device PCTV Systems PCTV 460e @ 480 Mbps (2013:024c, interface 0, class 0) [ 649.878435] em28xx: DVB interface 0 found [ 649.878521] em28xx #0: chip ID is em28174 [ 650.185637] em28xx #0: Identified as PCTV DVB-S2 Stick (460e) (card=80) [ 650.185648] em28xx #0: v4l2 driver version 0.1.3 [ 650.191512] em28xx #0: V4L2 video device registered as video0 [ 650.192190] usbcore: registered new interface driver em28xx [ 650.198126] a8293: Allegro A8293 SEC attached. [ 650.198136] DVB: registering new adapter (em28xx #0) [ 650.198145] DVB: registering adapter 0 frontend 0 (NXP TDA10071)... [ 650.201070] em28xx #0: Successfully loaded em28xx-dvb [ 650.201079] Em28xx: Initialized (Em28xx dvb Extension) extension [ 701.753869] tda10071: found a 'NXP TDA10071' in cold state, will try to load a firmware [ 701.753876] tda10071: downloading firmware from file 'dvb-fe-tda10071.fw' [ 703.219003] tda10071: firmware version 1.27.43.0 [ 703.219009] tda10071: found a 'NXP TDA10071' in warm state.
I have also cleaned TVHeadends config and restarted with fresh config, but the same error:
Jun 12 02:28:51.193 [ INFO] charset: 119 entries loaded Jun 12 02:28:51.194 [ INFO] dvb: Found adapter /dev/dvb/adapter0 (NXP TDA10071) via USB (480 Mbit/s) Jun 12 02:28:51.197 [ INFO] v4l: /dev/video0: em28xx PCTV DVB-S2 Stick (460e) usb-0000:00:1d.7-5 capabilities: 0x05000041 Jun 12 02:28:51.197 [ INFO] v4l: /dev/video0: Standard #0: 000000000000b000 NTSC, frameperiod: 1001/30000, 525 lines Jun 12 02:28:51.198 [ INFO] v4l: /dev/video0: Standard #1: 0000000000001000 NTSC-M, frameperiod: 1001/30000, 525 lines Jun 12 02:28:51.198 [ INFO] v4l: /dev/video0: Standard #2: 0000000000002000 NTSC-M-JP, frameperiod: 1001/30000, 525 lines Jun 12 02:28:51.198 [ INFO] v4l: /dev/video0: Standard #3: 0000000000008000 NTSC-M-KR, frameperiod: 1001/30000, 525 lines Jun 12 02:28:51.198 [ INFO] v4l: /dev/video0: Standard #4: 0000000000004000 NTSC-443, frameperiod: 1001/30000, 525 lines Jun 12 02:28:51.198 [ INFO] v4l: /dev/video0: Standard #5: 00000000000000ff PAL, frameperiod: 1/25, 625 lines Jun 12 02:28:51.198 [ INFO] v4l: /dev/video0: Standard #6: 0000000000000007 PAL-BG, frameperiod: 1/25, 625 lines Jun 12 02:28:51.198 [ INFO] v4l: /dev/video0: Standard #7: 0000000000000008 PAL-H, frameperiod: 1/25, 625 lines Jun 12 02:28:51.198 [ INFO] v4l: /dev/video0: Standard #8: 0000000000000010 PAL-I, frameperiod: 1/25, 625 lines Jun 12 02:28:51.199 [ INFO] v4l: /dev/video0: Standard #9: 00000000000000e0 PAL-DK, frameperiod: 1/25, 625 lines Jun 12 02:28:51.199 [ INFO] v4l: /dev/video0: Standard #10: 0000000000000100 PAL-M, frameperiod: 1001/30000, 525 lines Jun 12 02:28:51.199 [ INFO] v4l: /dev/video0: Standard #11: 0000000000000200 PAL-N, frameperiod: 1/25, 625 lines Jun 12 02:28:51.199 [ INFO] v4l: /dev/video0: Standard #12: 0000000000000400 PAL-Nc, frameperiod: 1/25, 625 lines Jun 12 02:28:51.199 [ INFO] v4l: /dev/video0: Standard #13: 0000000000000800 PAL-60, frameperiod: 1001/30000, 525 lines Jun 12 02:28:51.199 [ INFO] v4l: /dev/video0: Standard #14: 0000000000ff0000 SECAM, frameperiod: 1/25, 625 lines Jun 12 02:28:51.199 [ INFO] v4l: /dev/video0: Standard #15: 0000000000010000 SECAM-B, frameperiod: 1/25, 625 lines Jun 12 02:28:51.200 [ INFO] v4l: /dev/video0: Standard #16: 0000000000040000 SECAM-G, frameperiod: 1/25, 625 lines Jun 12 02:28:51.200 [ INFO] v4l: /dev/video0: Standard #17: 0000000000080000 SECAM-H, frameperiod: 1/25, 625 lines Jun 12 02:28:51.200 [ INFO] v4l: /dev/video0: Standard #18: 0000000000320000 SECAM-DK, frameperiod: 1/25, 625 lines Jun 12 02:28:51.200 [ INFO] v4l: /dev/video0: Standard #19: 0000000000400000 SECAM-L, frameperiod: 1/25, 625 lines Jun 12 02:28:51.200 [ INFO] v4l: /dev/video0: Standard #20: 0000000000800000 SECAM-Lc, frameperiod: 1/25, 625 lines Jun 12 02:28:51.200 [ INFO] v4l: /dev/video0: Format #0: 16 bpp YUY2, 4:2:2, packed [YUYV] Jun 12 02:28:51.262 [ INFO] v4l: /dev/video0: Format #1: 16 bpp RGB 565, LE [RGBP] Jun 12 02:28:51.262 [ INFO] v4l: /dev/video0: Format #2: 8 bpp Bayer BGBG..GRGR [BA81] Jun 12 02:28:51.263 [ INFO] v4l: /dev/video0: Format #3: 8 bpp Bayer GRGR..BGBG [GRBG] Jun 12 02:28:51.263 [ INFO] v4l: /dev/video0: Format #4: 8 bpp Bayer GBGB..RGRG [GBRG] Jun 12 02:28:51.263 [ INFO] v4l: /dev/video0: Format #5: 12 bpp YUV411 [411P] Jun 12 02:28:51.263 [WARNING] v4l: /dev/video0: Device does not have a tuner, device skipped Jun 12 02:28:51.266 [ ALERT] v4l: Unable to open /dev/video1 -- No such device or address Jun 12 02:28:51.268 [ ALERT] v4l: Unable to open /dev/video2 -- No such device or address Jun 12 02:28:51.270 [ ALERT] v4l: Unable to open /dev/video3 -- No such device or address Jun 12 02:28:51.272 [ ALERT] v4l: Unable to open /dev/video4 -- No such device or address Jun 12 02:28:51.274 [ INFO] CSA: Using SSE2 128bit parallel descrambling Jun 12 02:28:51.274 [ INFO] epggrab: module eit created Jun 12 02:28:51.274 [ INFO] epggrab: module uk_freesat created Jun 12 02:28:51.274 [ INFO] epggrab: module uk_freeview created Jun 12 02:28:51.274 [ INFO] epggrab: module viasat_baltic created Jun 12 02:28:51.278 [ DEBUG] opentv: dictionary skyit loaded Jun 12 02:28:51.278 [ DEBUG] opentv: dictionary skyeng loaded Jun 12 02:28:51.279 [ DEBUG] opentv: dictonaries loaded Jun 12 02:28:51.279 [ DEBUG] opentv: genre map skyuk loaded Jun 12 02:28:51.279 [ DEBUG] opentv: genre maps loaded Jun 12 02:28:51.280 [ INFO] epggrab: module opentv-ausat created Jun 12 02:28:51.280 [ DEBUG] opentv: provider ausat loaded Jun 12 02:28:51.280 [ INFO] epggrab: module opentv-skyuk created Jun 12 02:28:51.280 [ DEBUG] opentv: provider skyuk loaded Jun 12 02:28:51.280 [ INFO] epggrab: module opentv-skyit created Jun 12 02:28:51.280 [ DEBUG] opentv: provider skyit loaded Jun 12 02:28:51.280 [ DEBUG] opentv: providers loaded Jun 12 02:28:51.281 [ INFO] epggrab: module pyepg created Jun 12 02:28:51.281 [ INFO] epggrab: module xmltv created Jun 12 02:28:51.282 [ DEBUG] epggrab: using internal grab search Jun 12 02:28:51.284 [ DEBUG] epgdb: database does not exist Jun 12 02:28:51.284 [ INFO] dvr: Creating new configuration '' Jun 12 02:28:51.284 [WARNING] dvr: Output directory for video recording is not yet configured for DVR configuration "". Defaulting to to "/root". This can be changed from the web user interface. Jun 12 02:28:51.285 [ NOTICE] START: HTS Tvheadend version 3.5.201~g2a9ccdd-dirty started, running as PID:12254 UID:0 GID:0, settings located in '/share/MD0_DATA/.qpkg/TVHeadend/config' Jun 12 02:29:04.611 [ NOTICE] dvb: Adapter "NXP TDA10071" Enabled Jun 12 02:29:04.612 [ INFO] dvb: Adapter /dev/dvb/adapter0 will run in filtered mode Jun 12 02:29:04.612 [ NOTICE] dvb: Adapter "NXP TDA10071" mux autodiscovery set to: On Jun 12 02:29:04.648 [ NOTICE] dvb: Adapter "NXP TDA10071" quality monitoring set to: On Jun 12 02:29:13.857 [ NOTICE] dvb: New mux "12,551,500 kHz Vertical (Default (Port 0, Universal LNB))" created by built-in configuration from "dvb-s_Astra_19_2E" Jun 12 02:29:13.858 [ DEBUG] dvb: /dev/dvb/adapter0 opened frontend /dev/dvb/adapter0/frontend0 Jun 12 02:29:15.894 [ DEBUG] dvb: "/dev/dvb/adapter0" tuning via s2api to "12,551,500 kHz Vertical (Default (Port 0, Universal LNB))" (1951500, 22000000 Baud, 5/6, SYS_DVBS, QPSK) for Initial autoscan Jun 12 02:29:15.894 [ ERROR] dvb: "/dev/dvb/adapter0" tuning to "12,551,500 kHz Vertical (Default (Port 0, Universal LNB))" -- Front configuration failed -- Inappropriate ioctl for device, frequency: 1951500 ^CJun 12 02:29:22.000 [ INFO] epgdb: saved Jun 12 02:29:22.000 [ INFO] epgdb: brands 0 Jun 12 02:29:22.000 [ INFO] epgdb: seasons 0 Jun 12 02:29:22.000 [ INFO] epgdb: episodes 0 Jun 12 02:29:22.000 [ INFO] epgdb: broadcasts 0
Also there's no additional dmesg entry...
Anyone here who can explain me how to identify this error?
Note 1: DVBLink TVSource is able to use this Drivers and can scan Transponders and Services.
Note 2: w_scan also is able to use this Drivers and can scan Transponders and Services.
Regards,
wi-tom
RE: TVHeadend problems with DVB-S2 on QNAP - Added by Thomas Winkler over 11 years ago
Good News.
I have found the reason for the Problem.
My TVHeadend binary is compiled for 32-Bit and the kernel modules are compiled for 64-Bit.
Regards,
wi-tom
RE: [Solved]TVHeadend problems with DVB-S2 on QNAP - Added by virtual dj over 11 years ago
Jun 12 02:29:15.894 [ ERROR] dvb: "/dev/dvb/adapter0" tuning to "12,551,500 kHz Vertical (Default (Port 0, Universal LNB))" -- Front configuration failed -- Inappropriate ioctl for device, frequency: 1951500
I still use 32-bit TVHeadend with 64-bit kernel modules and they work with different tuners (Hauppauge WinTV Nova-T, HDHomerun, etc.).
I'm curious to know why it isn't working in this case and what's the cause of the "Inappropriate ioctl for device" error indeed.
Any advice?