0% signal after update to raring
Added by Michael Winkel over 11 years ago
I just upgraded to Ubuntu 13.04 (Raring) on 2 separate boxes.
Both were running from the old repo, so when i updated to raring i also switched to the new repo.
After the update however both machines show 0% signal. They both see the tuner (different tuners) but 0% signal on all muxes.
The one box is using a HDHomerun (which couldnt compile on raring because of missing kernel headers). I copied the headers from and old install and i could compile but got the 0% signal. Thought it was because of the compile issues so tried on another box which has a "TerraTec Cinergy HTC USB XS HD" tuner. No problems upgrading, but I'm getting the same 0% signal problems.
I checked cabling and it s fine (was working before upgrade so I expected this, but thought I'd better double check before posting here).
I have tried with first the stable repo and then the unstable without luck.
Some debug log when trying to play a channel through VLC standalone client:
Loglevel debug: enabled
May 03 11:43:28.887 HTTP: 127.0.0.1: /playlist/channelid/4 -- 401
May 03 11:43:31.993 HTTP: 127.0.0.1: using ticket D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C for /stream/channelid/4
May 03 11:43:31.994 Service: Subscription "HTTP": Skipping "DRXK DVB-C DVB-T/Digital mustcarry: 248,000 kHz/HD DR1" -- Quality below 10%
May 03 11:43:31.994 subscription: "HTTP" subscribing on "HD DR1", weight: 100, adapter: "DRXK DVB-C DVB-T", network: "Digital mustcarry", mux: "Digital mustcarry: 248,000 kHz", provider: "YouSee", service: "HD DR1", quality: 0
May 03 11:43:43.000 webui: Couldn't start streaming /stream/channelid/4?ticket=D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C, No input detected
May 03 11:43:43.000 subscription: "HTTP" unsubscribing from "HD DR1"
May 03 11:43:43.070 HTTP: 127.0.0.1: using ticket D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C for /stream/channelid/4
May 03 11:43:43.071 Service: Subscription "HTTP": Skipping "DRXK DVB-C DVB-T/Digital mustcarry: 248,000 kHz/HD DR1" -- Quality below 10%
May 03 11:43:43.071 subscription: "HTTP" subscribing on "HD DR1", weight: 100, adapter: "DRXK DVB-C DVB-T", network: "Digital mustcarry", mux: "Digital mustcarry: 248,000 kHz", provider: "YouSee", service: "HD DR1", quality: 0
May 03 11:43:55.000 webui: Couldn't start streaming /stream/channelid/4?ticket=D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C, No input detected
May 03 11:43:55.000 subscription: "HTTP" unsubscribing from "HD DR1"
May 03 11:43:55.130 HTTP: 127.0.0.1: using ticket D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C for /stream/channelid/4
May 03 11:43:55.130 Service: Subscription "HTTP": Skipping "DRXK DVB-C DVB-T/Digital mustcarry: 248,000 kHz/HD DR1" -- Quality below 10%
May 03 11:43:55.130 subscription: "HTTP" subscribing on "HD DR1", weight: 100, adapter: "DRXK DVB-C DVB-T", network: "Digital mustcarry", mux: "Digital mustcarry: 248,000 kHz", provider: "YouSee", service: "HD DR1", quality: 0
May 03 11:44:07.157 webui: Couldn't start streaming /stream/channelid/4?ticket=D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C, No input detected
May 03 11:44:07.157 subscription: "HTTP" unsubscribing from "HD DR1"
(the first 401 is before entering credentials)
Any clues as to what I'm doing wrong?
Anyone else who has upgraded to raring with success?
Replies (6)
0% signal after update to raring - Added by Adam Sutton over 11 years ago
Try disabling the signal monitoring stuff its been known to cause problems
on some setups.
Adam
On May 3, 2013 10:46 AM, wrote:
Tvheadend - General: 0% signal after update to raring
Michael WinkelI just upgraded to Ubuntu 13.04 (Raring) on 2 separate boxes.
Both were running from the old repo, so when i updated to raring i also
switched to the new repo.After the update however both machines show 0% signal. They both see the
tuner (different tuners) but 0% signal on all muxes.The one box is using a HDHomerun (which couldnt compile on raring because
of missing kernel headers). I copied the headers from and old install and i
could compile but got the 0% signal. Thought it was because of the compile
issues so tried on another box which has a "TerraTec Cinergy HTC USB XS HD"
tuner. No problems upgrading, but I'm getting the same 0% signal problems.I checked cabling and it s fine (was working before upgrade so I expected
this, but thought I'd better double check before posting here).I have tried with first the stable repo and then the unstable without luck.
Some debug log when trying to play a channel through VLC standalone client:
Loglevel debug: enabled
May 03 11:43:28.887 HTTP: 127.0.0.1: /playlist/channelid/4 -- 401
May 03 11:43:31.993 HTTP: 127.0.0.1: using ticket
D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C for /stream/channelid/4
May 03 11:43:31.994 Service: Subscription "HTTP": Skipping "DRXK DVB-C
DVB-T/Digital mustcarry: 248,000 kHz/HD DR1" -- Quality below 10%
May 03 11:43:31.994 subscription: "HTTP" subscribing on "HD DR1", weight:
100, adapter: "DRXK DVB-C DVB-T", network: "Digital mustcarry", mux:
"Digital mustcarry: 248,000 kHz", provider: "YouSee", service: "HD DR1",
quality: 0
May 03 11:43:43.000 webui: Couldn't start streaming
/stream/channelid/4?ticket=D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C, No
input detected
May 03 11:43:43.000 subscription: "HTTP" unsubscribing from "HD DR1"
May 03 11:43:43.070 HTTP: 127.0.0.1: using ticket
D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C for /stream/channelid/4
May 03 11:43:43.071 Service: Subscription "HTTP": Ski pping "DRXK DVB-C
DVB-T/Digital mustcarry: 248,000 kHz/HD DR1" -- Quality below 10%
May 03 11:43:43.071 subscription: "HTTP" subscribing on "HD DR1", weight:
100, adapter: "DRXK DVB-C DVB-T", network: "Digital mustcarry", mux:
"Digital mustcarry: 248,000 kHz", provider: "YouSee", service: "HD DR1",
quality: 0
May 03 11:43:55.000 webui: Couldn't start streaming
/stream/channelid/4?ticket=D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C, No
input detected
May 03 11:43:55.000 subscription: "HTTP" unsubscribing from "HD DR1"
May 03 11:43:55.130 HTTP: 127.0.0.1: using ticket
D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C for /stream/channelid/4
May 03 11:43:55.130 Service: Subscription "HTTP": Skipping "DRXK DVB-C
DVB-T/Digital mustcarry: 248,000 kHz/HD DR1" -- Quality below 10%
May 03 11:43:55.130 subscription: "HTTP" subscribing on "HD DR1", weight:
100, adapter: "DRXK DVB-C DVB-T", network: "Digital mustcarry", mux:
"Digital mustcarry: 248,000 kHz", provider: "YouSee", service: "HD DR1",
quality: 0
May 03 11:44:07.157 webui: Couldn't start streaming
/stream/channelid/4?ticket=D00BC51BC3CC3E6AEA0C3B3E2FA9C8397E891E5C, No
input detected
May 03 11:44:07.157 subscription: "HTTP" unsubscribing from "HD DR1"(the first 401 is before entering credentials)
Any clues as to what I'm doing wrong?
Anyone else who has upgraded to raring with success?
------------------------------You have received this notification because you have either subscribed to
it, or are involved in it.
To change your notification preferences, please click here:
https://tvheadend.org/my/account
RE: 0% signal after update to raring - Added by Michael Winkel over 11 years ago
It was off from the start and is off again now. Same issue.
I only enabled it to give more debug.
I just did a complete reinstall of the stable version and its the same aswell
Do you know of anyone running TVheadend succefully on 13.04?
RE: 0% signal after update to raring - Added by Alfred Zastrow over 11 years ago
Yes, my tvheadend is running on raring server. On the 1st days with the quantal package and since the ga2ccbb2-version with the native package.
No probs @ all, but because of my sat card (DVBSky S952 ~ Dual DVB-S/S2 PCIe) I've compiled my own kernel.
br
Alfred
RE: 0% signal after update to raring - Added by Michael Winkel over 11 years ago
Based on what kernel version?
RE: 0% signal after update to raring - Added by Alfred Zastrow over 11 years ago
3.8.8 - following this scheme:
http://www.howtoforge.com/kernel_compilation_ubuntu
btw: app-armor is deinstalled
br
Alfred
RE: 0% signal after update to raring - Added by Michael Winkel over 11 years ago
Update: There seems to be a problem with the current Ubuntu kernel.
On the HDHomerun setup I downloaded and compiled the 3.8.11 kernel from kernel.org and then i could install the HDHomerun drivers correctly and tvheadend was working.
The USB tuner setup it still isn't working. However that is a remote setup and I have to go check whether some cables have fallen out or something while troubleshooting.