Project

General

Profile

pi3b+, buster, tvh 4.3.1854 working - same setup on a pi4 not? (wintv dual hd)

Added by stefan 327 almost 5 years ago

Hello,
i moved my tvh installation to a pi4. Recording/watching is not possible anymore, I get errors like these in the logs:

Dec 5 00:11:35 raspberrypi kernel: [ 2030.577186] em28xx 1-1.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)

with the p3b+, everything worked well.
Does anybody know whats the reason for this problem and how it can be solved?

P.S.:
tvh version on the pi4b is 4.3.1857.

Thank you!
Stefan


Replies (7)

RE: pi3b+, buster, tvh 4.3.1854 working - same setup on a pi4 not? (wintv dual hd) - Added by saen acro almost 5 years ago

To work TVH it need working tuners.
Verify that tunners are installed and work correctly.

RE: pi3b+, buster, tvh 4.3.1854 working - same setup on a pi4 not? (wintv dual hd) - Added by stefan 327 almost 5 years ago

Hello,
tuners are there, sometimes there are a few seconds with fluid picture and sound, especially on sd channels, but then it stutters. or freezes complete.

I used the same firmware file as in the pi3b+, dvb-demod-si2168-b40-01.fw

I'm wondering if this is a tvh issue at all, perhaps it depends on the altered system architecture of the pi4?

Or are there other, hidden effects of the tvh migration to the other machine?
I had problems with user rights, because there were different uids. But that works now (login etc.)

RE: pi3b+, buster, tvh 4.3.1854 working - same setup on a pi4 not? (wintv dual hd) - Added by Christian Zippel almost 5 years ago

I have the same error on my pi4 (but with minisatip and other tuners).
befor the rpi4 the tuner are direct on tvheadend and everything was OK.

I also compiled the Media_build Driver, but the same.

FatFred

RE: pi3b+, buster, tvh 4.3.1854 working - same setup on a pi4 not? (wintv dual hd) - Added by saen acro almost 5 years ago

Until

ls /dev/dvb
dmesg |grep frontend

not start to return correct answers no success.

RE: pi3b+, buster, tvh 4.3.1854 working - same setup on a pi4 not? (wintv dual hd) - Added by stefan 327 almost 5 years ago

pi@raspberrypi:~ $ ls /dev/dvb
adapter0 adapter1

pi@raspberrypi:~ $ dmesg |grep frontend
[ 79.882757] em28xx 1-1.4:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[ 79.905950] em28xx 1-1.4:1.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)...
[ 80.641466] em28xx 1-1.4:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000)
[ 81.566845] em28xx 1-1.4:1.0: DVB: adapter 1 frontend 0 frequency 0 out of range (42000000..870000000)

strange.. at the moment it seems to work with the pi4.
i only changed the network connection (lan cable and switch port).
when i changed the pis, i had no connection with the old cable/port.
I already tested the network connection yesterday with iperf, the result was nearly 100% gbit...
is it possible that something like a "brummspannung" in english "hum voltage?" has an effect on the signal quality?
should i use network cables with or without ground connection?
or a "mantelstromfilter" ?

RE: pi3b+, buster, tvh 4.3.1854 working - same setup on a pi4 not? (wintv dual hd) - Added by stefan 327 almost 5 years ago

there is a firmware update available that brings new firmware for the usb controller of the pi4b:

VL805: up-to-date
CURRENT: 000137ad
LATEST: 000137ad

with that, it runs smoother now in first tests. there are still errors

Jan 24 17:58:05 raspberrypi kernel: [15206.474626] em28xx 1-1.3:1.0: write to i2c device at 0xce failed with unknown error (status=128)

but not so many.

    (1-7/7)