Cannot get unicable to work with Digbit R1 SAT>IP Server
Added by A L over 6 years ago
Hi,
Up to recently, I have been using a Digibit R1 with a singe input of a quad LNB. This has been completely trouble free.
I have just upgraded the quad LNB to an Inverto Unicable one and cannot seem to get more than one channel.
I changed setting (on the R1) to "Unicable" and added the additional three tuners in TVH. I have left everything on defaults.
I can stream a single channel but then when I try to watch another channel on another client, I get:
Subscription 0016: No input source available for input. "192.168.1.38"
What do you think I am doing wrong?
Replies (5)
RE: Cannot get unicable to work with Digbit R1 SAT>IP Server - Added by A L over 6 years ago
Solved now.
I needed to update the R1 with the user bands of the new LNB.
RE: Cannot get unicable to work with Digbit R1 SAT>IP Server - Added by VenimK Mac almost 5 years ago
A L wrote:
Solved now.
I needed to update the R1 with the user bands of the new LNB.
I know (Old Thread) but are u still using this setup ??
RE: Cannot get unicable to work with Digbit R1 SAT>IP Server - Added by A L over 4 years ago
I am indeed - still working perfectly.
Let me know if I can help in any way.
RE: Cannot get unicable to work with Digbit R1 SAT>IP Server - Added by VenimK Mac over 4 years ago
So, you have only one UNicable LNB ?
or how is your setup..
RE: Cannot get unicable to work with Digbit R1 SAT>IP Server - Added by A L over 4 years ago
Yes, that is right.
I have a single quad-unicable LNB that is connected to my Digbit R1 with a single coax.
The LNB is actually designed for round dishes and not the Zone 1 Sky dish that I have - however, it makes no difference to me and still gives me a flawless signal.
This is the actual model that I bought - https://www.amazon.co.uk/Inverto-Idlb-Qudl42-UNI2L-OPP-Unicable-2-Legacy-Black/dp/B00GKPK4AK