Tvheadend

Try playing the mux of the bouquet, which in your case looks like the freesat home transponder.

I may have done what you're after? (Sorry - Newish to TVH)

Went to Config > DVB Inputs > Muxes and found the MUX with a matching Name. Tried loading in VLC - Nothing in VLC but get the following in the logs.

I can play channels that should be mapped if I add manually.

2016-07-05 19:51:48.457 http: 10.0.1.164: using ticket DC6124FB70E794E6B92612736B39FD32B392239E for /stream/mux/ea86f69468da345a15324478bf5e55c4
2016-07-05 19:51:48.457 subscription: 0052: "HTTP" subscribing to mux "11425H", weight: 10, adapter: "TurboSight TBS 6902 DVBS/S2 frontend : DVB-S #0", network: "DVB-S Network", service: "Raw PID Subscription", hostname="10.0.1.164", client="VLC/2.2.4 LibVLC/2.2.4"

Scott Robinson wrote:

I may have done what you're after? (Sorry - Newish to TVH)

Went to Config > DVB Inputs > Muxes and found the MUX with a matching Name. Tried loading in VLC - Nothing in VLC but get the following in the logs.

I can play channels that should be mapped if I add manually.

2016-07-05 19:51:48.457 http: 10.0.1.164: using ticket DC6124FB70E794E6B92612736B39FD32B392239E for /stream/mux/ea86f69468da345a15324478bf5e55c4
2016-07-05 19:51:48.457 subscription: 0052: "HTTP" subscribing to mux "11425H", weight: 10, adapter: "TurboSight TBS 6902 DVBS/S2 frontend : DVB-S #0", network: "DVB-S Network", service: "Raw PID Subscription", hostname="10.0.1.164", client="VLC/2.2.4 LibVLC/2.2.4"

Have you selected the rescan and map zero-numbered channels options?

Unless I'm mistaken - Map zero-numbered channels is enabled (see the screenshot in original post)

I see no where for 'rescan'? (Attatched is my network settings aswell)

I find it strange that clicking the 'Force Scan' button does nothing at all in any logs?

Scott Robinson wrote:

Unless I'm mistaken - Map zero-numbered channels is enabled (see the screenshot in original post)

I see no where for 'rescan'? (Attatched is my network settings aswell)

Sorry my fault, I'd forgot that the rescan was replaced with the force scan button on the toolbar.

I find it strange that clicking the 'Force Scan' button does nothing at all in any logs?

When you enable a bouquet Tvheadend should automatically tune to the associated mux to pull the bouquet info and then attempt to map the channels. This is why I said to play the mux in vlc, you can tell it's receiving a complete mux by going to View -> Programmes, it should display the channels on that mux.

Unfortunately all of my systems are disconnected at the moment so I can't test right now, you may want to open a bug ticket though, but the last time I tried it, it worked as expected.