Continuity counter error
Replies (13)
RE: Continuity counter error
-
Added by saen acro almost 11 years ago
What container, video codec, audio codec?
RE: Continuity counter error
-
Added by Michael Donet almost 11 years ago
Mkv, video - h264, audio - mp2.
RE: Continuity counter error
-
Added by Prof Yaffle almost 11 years ago
The only other thought I have is to ask whether those libav errors are simply reflecting the CC errors - or whether they're the cause of the problem in some way. How are you building/installing your tvh binary? Are you using static ffmpeg (and what version), or dynamically linking (which I know has been problematic, but it should be possible)?
Does it happen just with the mkv/H.264/mp2 settings, or are others (e.g. VP8) any more successful?
If you create a recording profile that uses the same stream profile, does that work any better or does the recorded file also start to stutter?
Anything relevant in htop or similar when this is happening (e.g. an increasing memory usage for a process)?
I'm just thinking out loud, really...
RE: Continuity counter error
-
Added by Michael Donet almost 11 years ago
I think that libav error are consequence of CC errors.
I build TVH like this: AUTOBUILD_CONFIGURE_EXTRA=--enable-libffmpeg_static ./Autobuild.sh -t precise-i386
I have no idea if I use static or dynamic ffmpeg.
I have tried H264 and VP8 as well but there is no difference.
I don't do recording, just live tv.
Htop shows nothing unusual, just about 40% CPU usage and about 50% memory usage.
No signs of memory leaks.
RE: Continuity counter error
-
Added by saen acro almost 11 years ago
50% memory usage of 512Mb or 8Gb RAM /when write such stuff imagine how we are not with you behind your monitor/
check is there a difference if using
https://tvheadend.org/boards/5/topics/16651?r=16772#message-16772
12.04 have problems with ffmpeg from repo
try
sudo do-release-upgrade
precise work better
RE: Continuity counter error
-
Added by Michael Donet almost 11 years ago
It's 50% of 1GB. Server runs Ubuntu 14.04. How is your build different from master?
RE: Continuity counter error
-
Added by saen acro almost 11 years ago
Ubuntu 14.04.2 LTS (Trusty Tahr)
I build TVH like this: AUTOBUILD_CONFIGURE_EXTRA=--enable-libffmpeg_static ./Autobuild.sh -t precise-i386
Precise = 12.04
build on system with haven't such problems
saen@saen-ET1610PT:/opt/tvheadend$ ./configure
Checking support/features
checking for cc execinfo.h ... ok
checking for cc -mmmx ... ok
checking for cc -msse2 ... ok
checking for cc getloadavg ... ok
checking for cc atomic64 ... ok
checking for cc lockowner ... ok
checking for cc qsort_r ... ok
checking for cc stime ... ok
checking for cc recvmmsg ... ok
checking for cc sendmmsg ... ok
checking for cc libiconv ... fail
checking for cc libdvben50221 ... ok
checking for py module gzip ... ok
checking for gzip ... ok
checking for bzip2 ... ok
checking for pkg openssl ... ok (detected 1.0.1f)
checking for cc linux/dvb/version.h ... ok
checking for cc libhdhomerun/hdhomerun.h ... fail
checking for pkg zlib ... ok (detected 1.2.8)
checking for pkg liburiparser ... ok (detected 0.8.0.1)
checking for pkg avahi-client ... ok (detected 0.6.31)
checking for ffmpeg libraries ... fail
checking for pkg libavcodec >=55.34.1 ... ok (detected 56.1.0)
checking for pkg libavutil >=53.3.0 ... ok (detected 54.3.0)
checking for pkg libavformat >=55.12.0 ... ok (detected 56.1.0)
checking for pkg libswscale >=2.1.2 ... ok (detected 3.0.0)
checking for pkg libavresample >=1.1.0 ... ok (detected 2.1.0)
checking for cc sys/inotify.h ... ok
fetching dvb-scan files ... ok
checking for pkg dbus-1 ... ok (detected 1.8.12)
Compiler:
Using C compiler: cc
Using LD flags: -ldvben50221 -ldvbapi -lucsi
Build for arch: i686
Binaries:
Using PYTHON: python
Using GZIP: gzip
Using BZIP2: bzip2
Options:
cwc yes
capmt yes
constcw yes
linuxdvb yes
satip_server yes
satip_client yes
hdhomerun_client no
hdhomerun_static no
iptv yes
tsfile yes
dvbscan yes
timeshift yes
trace yes
imagecache yes
avahi yes
zlib yes
libav yes
libffmpeg_static no
libffmpeg_static_x264 yes
inotify yes
epoll yes
uriparser yes
ccache no
tvhcsa yes
bundle no
dvbcsa no
dvben50221 yes
kqueue no
dbus_1 yes
android no
tsdebug no
gtimer_check no
execinfo yes
mmx yes
sse2 yes
getloadavg yes
atomic64 yes
lockowner yes
qsort_r yes
stime yes
recvmmsg yes
sendmmsg yes
libdvben50221 yes
py_gzip yes
bin_gzip yes
bin_bzip2 yes
ssl yes
linuxdvbapi yes
upnp yes
inotify_h yes
linuxdvb_ca yes
mpegts yes
mpegts_dvb yes
Packages:
openssl 1.0.1f
zlib 1.2.8
liburiparser 0.8.0.1
avahi-client 0.6.31
libavcodec 56.1.0
libavutil 54.3.0
libavformat 56.1.0
libswscale 3.0.0
libavresample 2.1.0
dbus-1 1.8.12
Installation paths:
Prefix: /usr/local
Binaries: ${prefix}/bin
Libraries: ${prefix}/lib
Data files: ${prefix}/share
Man pages: ${datadir}/man
in About there is a link "Toggle details" where is show what version you use in time of compilation
ps. Jaroslav Kysela can you move this above image because 1366x768 screen hide content
RE: Continuity counter error
-
Added by Prof Yaffle almost 11 years ago
Not sure that the precise-i386 bit does anything other than set the architecture to 32-bit (i686) and then name the output file. It doesn't change the target binaries AFAIK.
You're using static ffmpeg (--enable-libffmpeg_static), so 'make' downloads ffmpeg, compiles it and statically links in the required libraries. You will keep using whatever version you downloaded when you first built it, however, until you either 'make clean' or manually remove the libav_static directory in your build directory ... I think we're currently using ffmpeg 2.6.3, so check in libav_static for that.
Perhaps worth trying a build from a different system, just in case something's up there.
I'd still test what happens when you use the same profile to record a file, as that might at least give something to analyse. I'd also try ts as a container as it's theoretically lower overhead - especially if you don't rewrite the PAT/EIT/etc. Along with the errors you posted, it sounds like you're losing sync frames or timer 'ticks' in the stream - but, as I said, I'm no expert here. Might be worth popping over to #hts on freenode to see if anyone there uses transcoding and can suggest what's up.
RE: Continuity counter error
-
Added by Michael Donet almost 11 years ago
I cannot find "Toggle details" link.
here is my build log:
Checking support/features
checking for cc execinfo.h ... ok
checking for cc -mmmx ... ok
checking for cc -msse2 ... ok
checking for cc getloadavg ... ok
checking for cc atomic64 ... ok
checking for cc lockowner ... ok
checking for cc qsort_r ... ok
checking for cc stime ... ok
checking for cc recvmmsg ... ok
checking for cc sendmmsg ... ok
checking for cc libiconv ... fail
checking for cc libdvben50221 ... fail
checking for py module gzip ... ok
checking for gzip ... ok
checking for bzip2 ... ok
checking for pkg openssl ... ok (detected 1.0.1f)
checking for cc linux/dvb/version.h ... ok
checking for cc libhdhomerun/hdhomerun.h ... fail
checking for pkg zlib ... ok (detected 1.2.8)
checking for pkg liburiparser ... ok (detected 0.7.5)
checking for pkg avahi-client ... ok (detected 0.6.31)
checking for cc sys/inotify.h ... ok
fetching dvb-scan files ... ok
checking for pkg dbus-1 ... ok (detected 1.6.18)
Compiler:
Using C compiler: cc
Build for arch: x86_64
Binaries:
Using PYTHON: python
Using GZIP: gzip
Using BZIP2: bzip2
Options:
cwc yes
capmt yes
constcw yes
linuxdvb yes
satip_server yes
satip_client yes
hdhomerun_client no
hdhomerun_static no
iptv yes
tsfile yes
dvbscan yes
timeshift yes
trace yes
imagecache yes
avahi yes
zlib yes
libav yes
libffmpeg_static yes
libffmpeg_static_x264 yes
inotify yes
epoll yes
uriparser yes
ccache no
tvhcsa yes
bundle no
dvbcsa no
dvben50221 no
kqueue no
dbus_1 yes
android no
tsdebug no
gtimer_check no
execinfo yes
mmx yes
sse2 yes
getloadavg yes
atomic64 yes
lockowner yes
qsort_r yes
stime yes
recvmmsg yes
sendmmsg yes
py_gzip yes
bin_gzip yes
bin_bzip2 yes
ssl yes
linuxdvbapi yes
upnp yes
inotify_h yes
mpegts yes
mpegts_dvb yes
Packages:
openssl 1.0.1f
zlib 1.2.8
liburiparser 0.7.5
avahi-client 0.6.31
dbus-1 1.6.18
Installation paths:
Prefix: /usr/local
Binaries: ${prefix}/bin
Libraries: ${prefix}/lib
Data files: ${prefix}/share
Man pages: ${datadir}/man
Final Binary:
/home/tvh/tvheadend/build.linux/tvheadend
Tvheadend Data Directory:
/usr/local/share/tvheadend
RE: Continuity counter error
-
Added by saen acro almost 11 years ago
https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu
I cannot find "Toggle details" link.
in "About" page
on each version after 4.1.180
RE: Continuity counter error
-
Added by Michael Donet almost 11 years ago
It shows this:
Configure arguments:
--build=x86_64-linux-gnu --prefix=/usr --includedir=${prefix}/include --mandir=${prefix}/share/man --infodir=${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --libexecdir=${prefix}/lib/tvheadend --disable-maintainer-mode --disable-dependency-tracking --enable-libffmpeg_static --arch=x86_64
Compiler:
Using C compiler: cc
Build for arch: x86_64
Binaries:
Using PYTHON: python
Using GZIP: gzip
Using BZIP2: bzip2
Options:
cwc yes
capmt yes
constcw yes
linuxdvb yes
satip_server yes
satip_client yes
hdhomerun_client no
hdhomerun_static no
iptv yes
tsfile yes
dvbscan yes
timeshift yes
trace yes
imagecache yes
avahi yes
zlib yes
libav yes
libffmpeg_static yes
libffmpeg_static_x264 yes
inotify yes
epoll yes
uriparser yes
ccache no
tvhcsa yes
bundle no
dvbcsa no
dvben50221 no
kqueue no
dbus_1 yes
android no
tsdebug no
gtimer_check no
execinfo yes
mmx yes
sse2 yes
getloadavg yes
atomic64 yes
lockowner yes
qsort_r yes
stime yes
recvmmsg yes
sendmmsg yes
py_gzip yes
bin_gzip yes
bin_bzip2 yes
ssl yes
linuxdvbapi yes
upnp yes
inotify_h yes
mpegts yes
mpegts_dvb yes
Packages:
openssl 1.0.1f
zlib 1.2.8
liburiparser 0.7.5
avahi-client 0.6.31
dbus-1 1.6.18
Installation paths:
Prefix: /usr
Binaries: ${prefix}/bin
Libraries: ${prefix}/lib
Data files: ${prefix}/share
Man pages: /usr/share/man
RE: Continuity counter error
-
Added by Michael Donet almost 11 years ago
So I have installed fresh Ubuntu 14.04 x64, latest driver for my tuner, latest Tvheadend from master and the issue is still there.
Loads of CC errors when transcoding. I think that it's down to TVH as I tried on two different systems with two different PCI tuners (S952 and TBS6981).
Hope it will be fixed at some point. Till then I assume that transcoding is broken.
RE: Continuity counter error
-
Added by saen acro almost 11 years ago
What show femon
$ sudo femon -H FE: DiBcom 3000MC/P (DVBT) status SCVYL | signal 97% | snr 74% | ber -1076102844 | unc -1218408725 | FE_HAS_LOCK status SCVYL | signal 97% | snr 74% | ber -1076102844 | unc -1218408725 | FE_HAS_LOCK status SCVYL | signal 97% | snr 74% | ber -1076102844 | unc -1218408725 | FE_HAS_LOCKbad signal
$sudo femon -H -a 1 FE: Afatech AF9013 (DVBT) status SCVYL | signal 100% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK status SCVYL | signal 100% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK status SCVYL | signal 100% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK status SCVYL | signal 100% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK status SCVYL | signal 100% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK status SCVYL | signal 100% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK status SCVYL | signal 100% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK status SCVYL | signal 100% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCKsignal ok