Tvheadend

2014-01-13 15:36:26.000 mpegts: 12551V - starting for 'initscan' (weight 2)
2014-01-13 15:36:26.000 mpegts: 12551V - tuning on Conexant CX24116/CX24118 : DVB-S #0
2014-01-13 15:36:26.510 subscription: 'initscan' subscribing to mux, weight: 2, adapter: 'Conexant CX24116/CX24118 : DVB-S #0', network: 'dasdasdsadsadsadsa', mux: '12551V'
2014-01-13 15:36:36.000 mpegts: 12551V - initial scan no data, failed
2014-01-13 15:36:36.000 subscription: "initscan" unsubscribing

The no data part is strange...or normal?!

So, no one using unicable except me?

Well, I would like to - but for me it´s currently not working.
I get this on startup:

...
2014-01-15 18:31:07.627 [ INFO] AVAHI: Service 'Tvheadend' successfully established.
2014-01-15 18:31:08.253 [ ERROR] linuxdvb: STV090x Multistandard : DVB-S #0 - failed to tune [e=Das Argument ist ungültig]
2014-01-15 18:31:08.253 [WARNING] mpegts: 11158V - failed to start, try another
2014-01-15 18:31:08.253 [ INFO] mpegts: 11158V - starting for 'epggrab' (weight 1)
2014-01-15 18:31:08.253 [ INFO] mpegts: 11158V - tuning on STV090x Multistandard : DVB-S #0
2014-01-15 18:31:09.915 [ ERROR] linuxdvb: STV090x Multistandard : DVB-S #0 - failed to tune [e=Das Argument ist ungültig]
2014-01-15 18:31:09.915 [WARNING] mpegts: 11158V - failed to start, try another
2014-01-15 18:31:09.915 [ INFO] mpegts: 11158V - starting for 'epggrab' (weight 1)
2014-01-15 18:31:09.915 [ INFO] mpegts: 11158V - tuning on STV090x Multistandard : DVB-S #0
...

And tvheadend hangs here...

Config error?
Can you post a screenshot from your adapter settings?
Have you tried seifes port, its still based on 3.5, but it works for me

-> https://github.com/seife/tvheadend

Seifes port worked so far, but I like to use current git.

Config error - maybe, but not from what you see in the config...
I changed the tuner config while still in initial scan - maybe that was a bad idea.

Wrong frequency values (S2CMD 03) for the DiSEqC sequence was the problem, but I don´t know why.

I made a fresh setup - it´s still running and currently mapping channels...

All channels found?
My problem is, no data received on most transponders, finds only french channels,and bibel tv ;>

Mapping will take some time, even with 4 tuners...
Currently 1203/1962 (19.2E + 13.0E)
Mapped 98, Ignored 1008, Failed 97

I will report.

Guys,

I would like to get to the bottom of this, clearly something has gone wrong during the various migrations that have taken place to get the code into master.

Unfortunately I'm not very familiar with the code, the only changes I made were some basic structural (and config) ones. Though those could certainly have caused issues.

A trace log would be really useful, start with these options:

--trace mpegts,linuxdvb,diseqc,en50494 -l tvh.log

and then paste those logs. I'll try and ask the guy that did the port to master when I see him on IRC.

Adam

Ok, mapping complete - 150 got mapped (haven´t checked them yet).
One thing is that I had to retune an other receiver (using scr channels 0 to 2) to get an picture there again (also stopped tvheadend).

After restarting tvheadend, I got the same error from yesterday (see log).
Commands like "S2CMD 03 => 0" or "S2CMD 03 => 4294966546" don´t look good to me...

And one more thing: after changing an adapter to unicode, you have to press save to activate the options (and to change the subitem). This collapses the treeview and you have to open the whole tree again. Any chance to keep the treeview expanded?

TVH Log attached.

Dirk Schalge same error here after restarting TVH.
2014-01-16 07:59:37.317 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Das Argument ist ungültig]

Guys,

can one of you report this as a bug. It's possible I'll get distracted and forget about this thread, but if its in as a bug I'm more likely to remember it!

Adam

Done