Project

General

Profile

TvHeadEnd, DSM 4.2 and HDHR3-EU

Added by soren bloch over 11 years ago

i recently got an HDHR3-EU tuner
and it works in the video center of the synology NAS
though i am unable to get the adapter to apear in tvheadend
i have tried re-booting, re-installing tvheadend but no luck
the package i use is that of http://www.synocommunity.com/
the NAS is an intel based DS1812+


Replies (7)

RE: TvHeadEnd, DSM 4.2 and HDHR3-EU - Added by Prof Yaffle over 11 years ago

You're not stopping Video Station before starting tvheadend, by any chance? You need them both running for tvheadend to work - otherwise the kernel modules don't load for the video subsystem.

RE: TvHeadEnd, DSM 4.2 and HDHR3-EU - Added by soren bloch over 11 years ago

video station is running i have even tried to boot the system up with tvheadend stopped to make sure that video station was started first and then starting tvheadend
i have tried using a dvb-t tuner and while i don't have any dvb-t channels, the tuner did apear in tvheadend

the only thing i can think of is that it doesn't work with the newly supported tuners of DSM 4.2

it would be nice to know if anyone got an HDHomerun tuner working with the synocommunity tvheadend package without larger software modifications

RE: TvHeadEnd, DSM 4.2 and HDHR3-EU - Added by Fred Peiffer over 11 years ago

I do have the same problem:

Synology 1511+ (Intel based) , DSM 4.2, Video Station works and recognized my HdHomeRun (older version, with two inputs)

I installed TvHeadEnd package from www.synocommunity.com. Video Station is still running.

When going to the configuration, the Tv Adapter combobox is empty....
I'm using Over the Air Antenna (ATSC) but that shouldn't matter yet.

Any help is welcome!

RE: TvHeadEnd, DSM 4.2 and HDHR3-EU - Added by Satz N over 11 years ago

I'm having the issue with Synology 210j with HdHomeRun (dual tuner version), US OTA channels.

RE: TvHeadEnd, DSM 4.2 and HDHR3-EU - Added by soren bloch over 11 years ago

i made an issue ticket on their github section
https://github.com/SynoCommunity/spksrc/issues/482
but it looks like he hasn't made any modifications to tvheadend since the beginning of febuary

RE: TvHeadEnd, DSM 4.2 and HDHR3-EU - Added by Satz N over 11 years ago

I got the adapters showing after installing the HDHomeRun package from http://forum.synology.com/enu/viewtopic.php?f=190&t=55075.

RE: TvHeadEnd, DSM 4.2 and HDHR3-EU - Added by soren bloch over 11 years ago

Satz N wrote:

I got the adapters showing after installing the HDHomeRun package from http://forum.synology.com/enu/viewtopic.php?f=190&t=55075.

but that only works with arm based systems as far as i can tell

    (1-7/7)