Tvheadend

Reduced the muxes to just one valid one (Channel 4+1, etc.) for testing. Nothing I can see in the logs. Thought it may be a permission issue on the Freenas box, but the settings are saved OK to the TVH folder. Any advice anyone?

Tvheadend Log:

Loglevel debug: enabled
2018-05-13 16:24:01.693 mpegts: adding mux 10729V in Test to scan queue weight 6 flags 4000
2018-05-13 16:24:01.693 mpegts: 10729V in Test - add raw service
2018-05-13 16:26:01.697 mpegts: 10729V in Test - add raw service
2018-05-13 16:28:01.698 mpegts: 10729V in Test - add raw service
2018-05-13 16:28:32.803 settings: saving to /usr/local/etc/tvheadend/input/satip/adapters/80a7e0a1756bf331d68fa6dcc9180a7a
2018-05-13 16:30:01.705 mpegts: 10729V in Test - add raw service
2018-05-13 16:30:01.705 service: 18: 10729V in Test si 0x8044b7c00 SAT>IP DVB-S Tuner #1 (192.168.1.25) weight 0 prio 11 error 0
2018-05-13 16:30:01.705 mpegts: 10729V in Test - tuning on SAT>IP DVB-S Tuner #1 (192.168.1.25)
2018-05-13 16:30:01.705 satip: SAT>IP DVB-S Tuner #1 (192.168.1.25) - starting 10729V in Test
2018-05-13 16:30:01.705 mpegts: 10729V in Test - started
2018-05-13 16:30:01.705 epggrab: 10729V in Test - registering mux for OTA EPG
2018-05-13 16:30:01.705 settings: saving to /usr/local/etc/tvheadend/epggrab/otamux/4c228155a3a2b0ed5ac2f95b40c9400b
2018-05-13 16:30:01.706 settings: saving to /usr/local/etc/tvheadend/epggrab/otamux/4c228155a3a2b0ed5ac2f95b40c9400b
2018-05-13 16:30:01.706 mpegts: 10729V in Test - open PID 0012 (18) [20/0x804425000]
2018-05-13 16:30:01.706 tbl-eit: eit: installed table handlers
2018-05-13 16:30:01.706 tbl-eit: eit: grab started
2018-05-13 16:30:01.706 mpegts: 10729V in Test - open PID 1FFB (8187) [20/0x804426800]
2018-05-13 16:30:01.706 tbl-eit: mgt: installed table handlers
2018-05-13 16:30:01.706 psip: psip: grab started
2018-05-13 16:30:01.706 mpegts: 10729V in Test - open PID tables subscription [0042/0x80446e400]
2018-05-13 16:30:01.706 subscription: 00EE: "scan" subscribing to mux "10729V", weight: 6, adapter: "SAT>IP DVB-S Tuner #1 (192.168.1.25)", network: "Test", service: "Raw PID Subscription"
2018-05-13 16:30:01.712 satip: 192.168.1.25 #1 - new session 08DC2BB8 stream id 71
2018-05-13 16:30:01.759 mpegts: 10729V in Test - open PID 0000 (0) [20/0x804454000]
2018-05-13 16:30:01.759 mpegts: 10729V in Test - open PID 0001 (1) [16/0x804455800]
2018-05-13 16:30:01.759 mpegts: 10729V in Test - open PID 0010 (16) [16/0x804458000]
2018-05-13 16:30:01.759 mpegts: 10729V in Test - open PID 0011 (17) [20/0x804459800]
2018-05-13 16:30:01.759 mpegts: 10729V in Test - open PID 0011 (17) [16/0x804467000]
2018-05-13 16:30:03.707 service: 10729V in Test: Status changed to [CA check]
2018-05-13 16:30:11.708 service: 10729V in Test: Status changed to [CA check] [Graceperiod expired] [Data timeout]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0011 (17) [20/0x804459800]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0010 (16) [16/0x804458000]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0001 (1) [16/0x804455800]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0000 (0) [20/0x804454000]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - scan no data, failed
2018-05-13 16:30:11.708 subscription: 00EE: "scan" unsubscribing
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID tables subscription [0042/0x80446e400]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - stopping mux
2018-05-13 16:30:11.708 satip: SAT>IP DVB-S Tuner #1 (192.168.1.25) - stopping 10729V in Test
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0011 (17) [16/0x804467000]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0012 (18) [20/0x804425000]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 1FFB (8187) [20/0x804426800]
2018-05-13 16:30:11.708 epggrab: grab done for 10729V in Test (stolen)
2018-05-13 16:30:11.708 mpegts: removing mux 10729V in Test from scan queue
2018-05-13 16:30:14.716 settings: saving to /usr/local/etc/tvheadend/input/dvb/networks/acc9312a85e23e458f3c394cff9747c0/muxes/4c228155a3a2b0ed5ac2f95b40c9400b

4c228155a3a2b0ed5ac2f95b40c9400b file created:

{
"config": {
"delsys": "DVB-S",
"frequency": 10729000,
"symbolrate": 22000000,
"polarisation": "V",
"modulation": "QPSK",
"fec": "5/6",
"rolloff": "35",
"pilot": "AUTO",
"stream_id": -1,
"pls_mode": "ROOT",
"pls_code": 1,
"orbital": "",
"enabled": 1,
"epg": 1,
"onid": 65535,
"tsid": 65535,
"scan_result": 2,
"tsid_zero": false,
"pmt_06_ac3": 0,
"eit_tsid_nocheck": false,
"sid_filter": 0,
"services": {
}
}
}

Ah! One step closer. Although scan result = "Fail", 12 services were discovered including Film 4 and E4.

Stream not playing in VLC, but will plod on and post an update.

Marcel

Picked this up again after a few months. Still struggling.

Can tune channels from Sat>IP server OK in VLC>Open Network Stream:

rtsp://192.168.1.60/?src=1&freq=10847&pol=v&ro=0.35&msys=dvbs2&mtype=8psk&plts=on&sr=23000&fec=23&pids=0,17,18,260,5400,5402

Adding this mux manually to TVH does give me any services and just "scan no data, failed":

TVH log
2018-08-25 04:12:49.639 mpegts: 10847V in Freesat - tuning on SAT>IP DVB-S Tuner #4 (192.168.1.60)
2018-08-25 04:12:49.639 subscription: 0037: "scan" subscribing to mux "10847V", weight: 6, adapter: "SAT>IP DVB-S Tuner #4 (192.168.1.60)", network: "Freesat", service: "Raw PID Subscription"
2018-08-25 04:12:59.642 mpegts: 10847V in Freesat - scan no data, failed
2018-08-25 04:12:59.642 subscription: 0037: "scan" unsubscribing

Unable to replicate my partial success of some services on 13/5

Anyone has any ideas how to get past this point?

I meant "...does NOT give me any services"

A bit more detail:
When I scan the mux by setting it ACTIVE
I can see the signal strength in the TVH go to 100%
I can also see the Xoro 8100 momentarily tune the mux
But then it releases again and produces the log result with no services found

It seems I am close to getting this working and may need just one small setting.

Anyone?

I have not played much with satip, but maybe if you provide debug/trace logs somebody (or even you) will see something to indicate the problem.