Project

General

Profile

Freenas + Tvheadend Jail + Xoro 8100 SAT>IP server - TVH cannot find any services

Added by M H over 6 years ago

Have installed Xoro 8100 SAT>IP server and can scan and tune channels using ProgTV Andoid app without problems. Port #4 and Port #3 on the Xoro 8100 have a dual LNB connected. Xoro LNB has one user per RF selected for LNB configuration.

Would like to add TVH + a TVH client.

Have done the following to add TVH jail to my Freenas:
1. In Freenas "Add Jail" called tvheadend
2. Open shell window in tvheadend jail
3. pkg update -f
4. pkg install "tvheadend"
5. pkg install p5-xmltv (=TV Guide)
5. sysrc "tvheadend_enable=YES"
6. sysrc "tvheadend_flags=-C"
7. service tvheadend start
8. in browser go to TVH; htttp://<my-ip>:9981
9. Set UI language and EPG languages
10. Add allowed network and users
11. The Xoro 8100 is automatically detected by TVH
12. Add Network (Astra 28.2E)
13. In TV Adapters assign new network to tuner #1
14. In Networks, Force Scan

All 83 muxes are scanned. I can see my Xoro 8100 being tuned in the frontend information of the Xoro webapp. The TVH Status > Stream shows signal strength when scanning.

However, I do not appear to add any new services. All muxes scan results say "Fail". No channel names are picked up.

Can anyone please point me in the right direction?

Marcel

tvheadend fail.png (127 KB) tvheadend fail.png TVH Scan Result = Fail

Replies (5)

RE: Freenas + Tvheadend Jail + Xoro 8100 SAT>IP server - TVH cannot find any services - Added by M H over 6 years ago

Reduced the muxes to just one valid one (Channel 4+1, etc.) for testing. Nothing I can see in the logs. Thought it may be a permission issue on the Freenas box, but the settings are saved OK to the TVH folder. Any advice anyone?

Tvheadend Log:

Loglevel debug: enabled
2018-05-13 16:24:01.693 mpegts: adding mux 10729V in Test to scan queue weight 6 flags 4000
2018-05-13 16:24:01.693 mpegts: 10729V in Test - add raw service
2018-05-13 16:26:01.697 mpegts: 10729V in Test - add raw service
2018-05-13 16:28:01.698 mpegts: 10729V in Test - add raw service
2018-05-13 16:28:32.803 settings: saving to /usr/local/etc/tvheadend/input/satip/adapters/80a7e0a1756bf331d68fa6dcc9180a7a
2018-05-13 16:30:01.705 mpegts: 10729V in Test - add raw service
2018-05-13 16:30:01.705 service: 18: 10729V in Test si 0x8044b7c00 SAT>IP DVB-S Tuner #1 (192.168.1.25) weight 0 prio 11 error 0
2018-05-13 16:30:01.705 mpegts: 10729V in Test - tuning on SAT>IP DVB-S Tuner #1 (192.168.1.25)
2018-05-13 16:30:01.705 satip: SAT>IP DVB-S Tuner #1 (192.168.1.25) - starting 10729V in Test
2018-05-13 16:30:01.705 mpegts: 10729V in Test - started
2018-05-13 16:30:01.705 epggrab: 10729V in Test - registering mux for OTA EPG
2018-05-13 16:30:01.705 settings: saving to /usr/local/etc/tvheadend/epggrab/otamux/4c228155a3a2b0ed5ac2f95b40c9400b
2018-05-13 16:30:01.706 settings: saving to /usr/local/etc/tvheadend/epggrab/otamux/4c228155a3a2b0ed5ac2f95b40c9400b
2018-05-13 16:30:01.706 mpegts: 10729V in Test - open PID 0012 (18) [20/0x804425000]
2018-05-13 16:30:01.706 tbl-eit: eit: installed table handlers
2018-05-13 16:30:01.706 tbl-eit: eit: grab started
2018-05-13 16:30:01.706 mpegts: 10729V in Test - open PID 1FFB (8187) [20/0x804426800]
2018-05-13 16:30:01.706 tbl-eit: mgt: installed table handlers
2018-05-13 16:30:01.706 psip: psip: grab started
2018-05-13 16:30:01.706 mpegts: 10729V in Test - open PID tables subscription [0042/0x80446e400]
2018-05-13 16:30:01.706 subscription: 00EE: "scan" subscribing to mux "10729V", weight: 6, adapter: "SAT>IP DVB-S Tuner #1 (192.168.1.25)", network: "Test", service: "Raw PID Subscription"
2018-05-13 16:30:01.712 satip: 192.168.1.25 #1 - new session 08DC2BB8 stream id 71
2018-05-13 16:30:01.759 mpegts: 10729V in Test - open PID 0000 (0) [20/0x804454000]
2018-05-13 16:30:01.759 mpegts: 10729V in Test - open PID 0001 (1) [16/0x804455800]
2018-05-13 16:30:01.759 mpegts: 10729V in Test - open PID 0010 (16) [16/0x804458000]
2018-05-13 16:30:01.759 mpegts: 10729V in Test - open PID 0011 (17) [20/0x804459800]
2018-05-13 16:30:01.759 mpegts: 10729V in Test - open PID 0011 (17) [16/0x804467000]
2018-05-13 16:30:03.707 service: 10729V in Test: Status changed to [CA check]
2018-05-13 16:30:11.708 service: 10729V in Test: Status changed to [CA check] [Graceperiod expired] [Data timeout]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0011 (17) [20/0x804459800]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0010 (16) [16/0x804458000]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0001 (1) [16/0x804455800]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0000 (0) [20/0x804454000]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - scan no data, failed
2018-05-13 16:30:11.708 subscription: 00EE: "scan" unsubscribing
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID tables subscription [0042/0x80446e400]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - stopping mux
2018-05-13 16:30:11.708 satip: SAT>IP DVB-S Tuner #1 (192.168.1.25) - stopping 10729V in Test
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0011 (17) [16/0x804467000]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 0012 (18) [20/0x804425000]
2018-05-13 16:30:11.708 mpegts: 10729V in Test - close PID 1FFB (8187) [20/0x804426800]
2018-05-13 16:30:11.708 epggrab: grab done for 10729V in Test (stolen)
2018-05-13 16:30:11.708 mpegts: removing mux 10729V in Test from scan queue
2018-05-13 16:30:14.716 settings: saving to /usr/local/etc/tvheadend/input/dvb/networks/acc9312a85e23e458f3c394cff9747c0/muxes/4c228155a3a2b0ed5ac2f95b40c9400b

4c228155a3a2b0ed5ac2f95b40c9400b file created:

{
"config": {
"delsys": "DVB-S",
"frequency": 10729000,
"symbolrate": 22000000,
"polarisation": "V",
"modulation": "QPSK",
"fec": "5/6",
"rolloff": "35",
"pilot": "AUTO",
"stream_id": -1,
"pls_mode": "ROOT",
"pls_code": 1,
"orbital": "",
"enabled": 1,
"epg": 1,
"onid": 65535,
"tsid": 65535,
"scan_result": 2,
"tsid_zero": false,
"pmt_06_ac3": 0,
"eit_tsid_nocheck": false,
"sid_filter": 0,
"services": {
}
}
}

RE: Freenas + Tvheadend Jail + Xoro 8100 SAT>IP server - TVH cannot find any services - Added by M H over 6 years ago

Ah! One step closer. Although scan result = "Fail", 12 services were discovered including Film 4 and E4.

Stream not playing in VLC, but will plod on and post an update.

Marcel

VLC error.png (10 KB) VLC error.png VLC error
tvheadend fail 2.png (141 KB) tvheadend fail 2.png Channels now found, but Mux still fails

RE: Freenas + Tvheadend Jail + Xoro 8100 SAT>IP server - TVH cannot find any services - Added by M H about 6 years ago

Picked this up again after a few months. Still struggling.

Can tune channels from Sat>IP server OK in VLC>Open Network Stream:

rtsp://192.168.1.60/?src=1&freq=10847&pol=v&ro=0.35&msys=dvbs2&mtype=8psk&plts=on&sr=23000&fec=23&pids=0,17,18,260,5400,5402

Adding this mux manually to TVH does give me any services and just "scan no data, failed":

TVH log
2018-08-25 04:12:49.639 mpegts: 10847V in Freesat - tuning on SAT>IP DVB-S Tuner #4 (192.168.1.60)
2018-08-25 04:12:49.639 subscription: 0037: "scan" subscribing to mux "10847V", weight: 6, adapter: "SAT>IP DVB-S Tuner #4 (192.168.1.60)", network: "Freesat", service: "Raw PID Subscription"
2018-08-25 04:12:59.642 mpegts: 10847V in Freesat - scan no data, failed
2018-08-25 04:12:59.642 subscription: 0037: "scan" unsubscribing

Unable to replicate my partial success of some services on 13/5

Anyone has any ideas how to get past this point?

RE: Freenas + Tvheadend Jail + Xoro 8100 SAT>IP server - TVH cannot find any services - Added by M H about 6 years ago

I meant "...does NOT give me any services"

A bit more detail:
When I scan the mux by setting it ACTIVE
I can see the signal strength in the TVH go to 100%
I can also see the Xoro 8100 momentarily tune the mux
But then it releases again and produces the log result with no services found

It seems I am close to getting this working and may need just one small setting.

Anyone?

RE: Freenas + Tvheadend Jail + Xoro 8100 SAT>IP server - TVH cannot find any services - Added by Joe User about 6 years ago

I have not played much with satip, but maybe if you provide debug/trace logs somebody (or even you) will see something to indicate the problem.

    (1-5/5)