Project

General

Profile

FireDTV; No TV Adapter listed

Added by emrah yilmaz about 13 years ago

I cant see my tv adapter. In my case it is a firewire card: FireDTV.

  1. lspci:
    03:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
  1. lsmod:
    firedtv 32746 0
    dvb_core 110616 1 firedtv
    firewire_ohci 40722 0
    firewire_core 63626 2 firedtv,firewire_ohci
  1. dmesg | grep fire:
    [ 2.738621] firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 2.792118] firewire_ohci: Added fw-ohci device 0000:03:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
    [ 3.292119] firewire_core: created device fw0: GUID 0076fb5b00001fd0, S400
    [ 3.292137] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
    [ 6.325699] firewire_core: created device fw1: GUID 00128726020004b3, S400, 1 config ROM retries
    [ 8.040030] firedtv fw1.0: FCP response timed out
    [ 8.068150] firedtv: probe of fw1.0 failed with error -110

hope somebody can give me a hint. I also have no folder /dev/dvb . So the last two lines in dmesg tell sme the card is not installed succesfully. On my last installation I had to install a new module but I cant remember and find which one :(


Replies (2)

RE: FireDTV; No TV Adapter listed - Added by Hein Rigolo about 13 years ago

Did you install the correct firmware?
Try linux-firmware or linux-firmware-nonfree

RE: FireDTV; No TV Adapter listed - Added by Eric Kowalewski almost 11 years ago

Hi,

Did you ever get this to work?
Eric at Kowalewski dot com
    (1-2/2)