Project

General

Profile

Tvheadend initial scan: no channels AT ALL, w-scan works.

Added by Peter Wriesnik almost 9 years ago

Hi there! I am completely lost with the setup of my DVB-S/S2 card. I own a TBS 6928se, running on an Ubuntu 15.10. The system sees the card, driver modules are loaded and the card works just fine:

dmesg
[    6.279776] TurboSight TBS 6928SE Frontend Attaching...
[    6.350770] TurboSight TBS6928SE DVB-S2 card MAC=00:22:ab:e0:5a:ef
[    6.372202] tbsci: Initializing TBS 6928SE CI slot
[    6.372361] tbsci: Adapter 1 CI slot initialized
[    6.372364] DVB: registering adapter 1 frontend 0 (TurboSight TBS 6928SE DVBS/S2 frontend)...
[    6.527728] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   13.633165] tbsci: Adapter 1 CI slot enabled
[   13.633167] dvb_ca adapter 1: DVB CAM detected and initialised successfully
lspci -v
01:00.0 Multimedia controller: Philips Semiconductors SAA7160 (rev 03)
    Subsystem: Device 6928:0002
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at df200000 (64-bit, non-prefetchable) [size=1M]
    Capabilities: <access denied>
    Kernel driver in use: SAA716x TBS

So far so good. I am running tvheadend: version 4.0.8-3~gc870eb9~trusty, starts just fine and also sees the DVB input. It lists it under /dev/dvb/adapter1.

I then add a Network (Astra 19.2) with the predefined muxes and force scan it, nothing happens.

However, when i run w-scan on the device, i get channels:

ProSieben Schweiz;ProSiebenSat.1:12051:vC34M2O0S0:S19.2E:27500:289=2:290=deu@3;292:33:0:20001:1:1082:0
ProSieben Austria;ProSiebenSat.1:12051:vC34M2O0S0:S19.2E:27500:161=2:84=deu@3;85:36:0:20002:1:1082:0
Kabel 1 Schweiz;ProSiebenSat.1:12051:vC34M2O0S0:S19.2E:27500:162=2:163=deu@3:165:0:20003:1:1082:0
Kabel 1 Austria;ProSiebenSat.1:12051:vC34M2O0S0:S19.2E:27500:166=2:167=deu@3:169:0:20004:1:1082:0
SAT.1 A;ProSiebenSat.1:12051:vC34M2O0S0:S19.2E:27500:800=2:801=deu@3;803:802:0:20005:1:1082:0
SAT.1 CH;ProSiebenSat.1:12051:vC34M2O0S0:S19.2E:27500:1535=2:1536=deu@3;1539:38:0:20006:1:1082:0
PULS 4 Austria;ProSiebenSat.1:12051:vC34M2O0S0:S19.2E:27500:1791=2:1792=deu@3:39:1833:20007:1:1082:0
SAT.1 HH/SH;ProSiebenSat.1:12051:vC34M2O0S0:S19.2E:27500:2047=2:2048=deu@3;2051:40:0:20008:1:1082:0
SAT.1 NS/Bremen;ProSiebenSat.1:12051:vC34M2O0S0:S19.2E:27500:2047=2:2048=deu@3;2051:40:0:20009:1:1082:0
SAT.1 RhlPf/Hessen;ProSiebenSat.1:12051:vC34M2O0S0:S19.2E:27500:2047=2:2048=deu@3;2051:40:0:20010:1:1082:0
CINE+ CLASSIC;CSAT:11934:vC34M2O0S0:S19.2E:27500:110=2:121=fra@4,122=eng:141:1811,1863,100:8101:1:1076:0
CINE+ EMOTION;CSAT:11934:vC34M2O0S0:S19.2E:27500:210=2:221=fra@4,224=eng:241:1811,1863,100:8102:1:1076:0
CINE+ FRISSON;CSAT:11934:vC34M2O0S0:S19.2E:27500:310=2:321=fra@4,322=eng:341:1811,1863,100:8103:1:1076:0
D17;CSAT:11934:vC34M2O0S0:S19.2E:27500:410=2:421=fra@4,422=eng:441:0:8104:1:1076:0
DISNEY CHANNEL;CSAT:11934:vC34M2O0S0:S19.2E:27500:510=2:521=fra@4,522=eng:541:1811,1863,100:8105:1:1076:0
INFO TNTSAT;(null):11934:vC34M2O0S0:S19.2E:27500:610=2:621=fra@4:0:0:8106:1:1076:0
MCM;CSAT:11934:vC34M2O0S0:S19.2E:27500:710=2:722=eng@4,721=fra:741:1811,1863,100:8107:1:1076:0
NATIONAL GEO;CSAT:11934:vC34M2O0S0:S19.2E:27500:810=2:821=fra@4:841:1811,1863,100:8108:1:1076:0
PARIS PREMIERE;CSAT:11934:vC34M2O0S0:S19.2E:27500:910=2:921=fra@4,922=eng,923=qad:941:1811,500,1863,100:8109:1:1076:0
TV5MONDE;CSAT:11934:vC34M2O0S0:S19.2E:27500:1010=2:1021=fra@4:1041:0:8110:1:1076:0
NUMERO 23;CSAT:11934:vC34M2O0S0:S19.2E:27500:1110=2:1121=fra@4,1122=eng:1141:1811,1863,500,100:8111:1:1076:0
F3 CORSEVIASTELLA;CSAT:11934:vC34M2O0S0:S19.2E:27500:1210=2:1221=fra@4:1241:1811,1812,1819,1863,500,100:8112:1:1076:0
NUMERO 23;CSAT:11934:vC34M2O0S0:S19.2E:27500:1110=2:1121=fra@4,1122=eng:1141:1811,1863,500,100:8121:1:1076:0
D17;CSAT:11934:vC34M2O0S0:S19.2E:27500:410=2:421=fra@4,422=eng:441:0:8124:1:1076:0
MTV Music 24;MTV Networks Europe:11973:vC34M2O0S0:S19.2E:27500:4011+8190=2:4012@4:0:500,100,B00,1817,1818,1819,648,D95,D98,650:28671:1:1078:0
MTV Nederland;MTV Networks Europe:11973:vC34M2O0S0:S19.2E:27500:4041+8190=2:4042=dut@4:4044:1817,1818,500,100:28674:1:1078:0
Comedy Central Nederland;MTV Networks Europe:11973:vC34M2O0S0:S19.2E:27500:4051+8190=2:4052=dut@4:4054:1817,500,100:28675:1:1078:0
Comedy Central/VIVA;MTV Networks Europe:11973:vC34M2O0S0:S19.2E:27500:4061+8190=2:4062@4:4064:0:28676:1:1078:0
Nick Jr;MTV Networks Europe:11973:vC34M2O0S0:S19.2E:27500:4081=2:4082=rus@4,4083=eng,4084=hun,4085=ara,4086=ron,4087=hrv,4088=srp:0:500,BAA,624:28678:1:1078:0
Nick/Spike;MTV Networks Europe:11973:vC34M2O0S0:S19.2E:27500:4091+8190=2:4092@4:4094:500,100,1817,1818:28679:1:1078:0
Nickelodeon;MTV Networks Europe:11973:vC34M2O0S0:S19.2E:27500:4101+8190=2:4102=ger@4,4103=eng:4104:0:28680:1:1078:0
Nicktoons (S);MTV Networks Europe:11973:vC34M2O0S0:S19.2E:27500:4121+8190=2:4122@4:0:500:28682:1:1078:0

How do I get those muxes to run in tvheadend? Help would be really appreciated, I've been trying to get this thing working for days now.


Replies (9)

RE: Tvheadend initial scan: no channels AT ALL, w-scan works. - Added by Mark Clarkstone almost 9 years ago

You've enabled and assigned a network to an adapter right?

RE: Tvheadend initial scan: no channels AT ALL, w-scan works. - Added by Mark Clarkstone almost 9 years ago

Can you play the mux? Copy and paste the play link into VLC then watch the output in Tvheadends log (click the bottom bar then click on the cog to enable debug).

RE: Tvheadend initial scan: no channels AT ALL, w-scan works. - Added by Peter Wriesnik almost 9 years ago

What exactly do you want me to copy to VLC? A mux from the w-scan output or the predefined mux in TVheadend?

RE: Tvheadend initial scan: no channels AT ALL, w-scan works. - Added by Richard Templeman over 8 years ago

Hi, I have a very similar problem:
tvheadend 4.0.8~wily ubuntu 15.10 epggrab: Not getting any epg data at all.

I have a TBS5928 adapter USB QBOXS2 which runs perfectly OK on Windows 8.1 attached to the same PC (dual boot with ubuntu)

I have recently configured tvheadend for the first time and can view Astra-28.2E channels OK from the Play button in the configuration->dvb inputs->services tab.
I have checked the EPG configuration and am using EIT only (no internal or external grabbers)

Here's a sample output from syslog:
2016-02-08 11:30:49.392 tot: invalid checksum (len 8, errors 56)
2016-02-08 11:31:09.392 tot: invalid checksum (len 8, errors 58)
2016-02-08 11:31:29.459 tot: invalid checksum (len 8, errors 60)
2016-02-08 11:31:41.000 epggrab: UK: Freesat - data completion timeout for 11170.75H in Astra28.2EAll
2016-02-08 11:31:41.000 epggrab: EIT: DVB Grabber - data completion timeout for 11170.75H in Astra28.2EAll
2016-02-08 11:31:41.000 subscription: 000C: "epggrab" unsubscribing
2016-02-08 11:31:42.000 mpegts: 11508.5V in Astra28.2EAll - tuning on Conexant CX24116/CX24118 : DVB-S #0
2016-02-08 11:31:42.116 subscription: 000E: "epggrab" subscribing to mux "11508.5V", weight: 4, adapter: "Conexant CX24116/CX24118 : DVB-S #0", network: "Astra28.2EAll", service: "Raw PID Subscription"
2016-02-08 11:31:44.004 tot: invalid checksum (len 8, errors 1)
2016-02-08 11:32:04.001 tot: invalid checksum (len 8, errors 3)
2016-02-08 11:32:24.012 tot: invalid checksum (len 8, errors 5)
2016-02-08 11:32:44.455 tot: invalid checksum (len 8, errors 7)
2016-02-08 11:33:04.463 tot: invalid checksum (len 8, errors 9)
2016-02-08 11:33:24.442 tot: invalid checksum (len 8, errors 11)
2016-02-08 11:33:44.446 tot: invalid checksum (len 8, errors 13)
2016-02-08 11:34:04.460 tot: invalid checksum (len 8, errors 15)
.......
2016-02-08 11:41:24.460 tot: invalid checksum (len 8, errors 59)
2016-02-08 11:41:44.470 tot: invalid checksum (len 8, errors 61)
2016-02-08 11:41:52.000 epggrab: UK: Freesat - data completion timeout for 11508.5V in Astra28.2EAll
2016-02-08 11:41:52.000 epggrab: EIT: DVB Grabber - data completion timeout for 11508.5V in Astra28.2EAll
2016-02-08 11:41:52.000 subscription: 000E: "epggrab" unsubscribing
2016-02-08 11:41:53.000 mpegts: 11265V in Astra28.2EAll - tuning on Conexant CX24116/CX24118 : DVB-S #0
2016-02-08 11:41:53.116 subscription: 0010: "epggrab" subscribing to mux "11265V", weight: 4, adapter: "Conexant CX24116/CX24118 : DVB-S #0", network: "Astra28.2EAll", service: "Raw PID Subscription"
2016-02-08 11:42:00.402 tot: invalid checksum (len 8, errors 1)
2016-02-08 11:42:00.402 time: TDT - unable to update system time: Operation not permitted
2016-02-08 11:42:20.411 tot: invalid checksum (len 8, errors 3)
2016-02-08 11:42:40.400 tot: invalid checksum (len 8, errors 5)
...... etc....
This is repeating for all the channels similarly.

Does this help. I thought would add my problem to yours here rather than raise a separate one as it seems so similar.

RE: Tvheadend initial scan: no channels AT ALL, w-scan works. - Added by Richard Templeman over 8 years ago

Additional info to above:
I am using DVBViewer on windows8.1. Get full EPG data no problem.

RE: Tvheadend initial scan: no channels AT ALL, w-scan works. - Added by Levente Cseh over 8 years ago

I am on 4.1-1724~g41707e1~trusty version and have 4 dishes with quad LNBs, pointed to different satellites, one being Astra 19.2.
All the other sats/muxes are detected and scanned and work fine except 19.2. This specific one does not have a predefined mux database included recently, not sure if that is the problem.

This issue started to appear after I decided to reinstall the whole system, because of HDD replacement.

Is there any solution to have it working again?

RE: Tvheadend initial scan: no channels AT ALL, w-scan works. - Added by maxime tusseau over 8 years ago

Hello there,
I installed tvheadend 4.0.7 with the osmc App store. I use a WinTV-Duet HD TV-tuner, the firmware is installed and tvheadend recognizes the two adapters.
But all the muxes have a scan "FAIL". I tried a scan with w_scan, it worked. The pre-defined muxes (france) have the same frequencies as those obtained with w_scan.
Does anyone has an idea, please?

    (1-9/9)