Project

General

Profile

Forums » Tutorial and setups »

"Arte HD" is not found (S02, 114 MHz, 256QAM, 6900 KSym/s, TSID: 10014, ONID: 61441)

Added by Thomas Kovacs over 10 years ago

All,

First: tvheadend is working stable on debian. A huge "thank you" to all developers! :D

There is just one thing I am unable to achive: watching Arte HD.

What I found out:

- in my cable network (Kabel deutschland, Fürth) the respective channel should be here:
Parameter: S02, 114 MHz, 256QAM, 6900 KSym/s, TSID: 10014, ONID: 61441
Sender: hr-fernsehen HD, arte HD, kabel eins HD, sport1 HD, Cartoon Network HD, Spiegel TV Wissen HD
(And no, none of these channels is showing up...)
- all other frequencies are working like they should
- w_scan does find the channel (...)

Please, what can I do?


Replies (4)

RE: "Arte HD" is not found (S02, 114 MHz, 256QAM, 6900 KSym/s, TSID: 10014, ONID: 61441) - Added by Prof Yaffle over 10 years ago

Does the mux show up? Is it that the mux is missing, or the services, or the channels?

Without knowing what tuner and/or what version of tvheadend you're using, it's a bit random. I don't even know if this is the only HD mux and whether your tuner supports that CODEC, for example.

If you post a screenshot of your adapter config and another one of the muxes you have and this specific mux config, I'll see if there's anything that leaps out.

RE: "Arte HD" is not found (S02, 114 MHz, 256QAM, 6900 KSym/s, TSID: 10014, ONID: 61441) - Added by Thomas Kovacs over 10 years ago

First: sorry for the delayed reply!

To your questions:

Does the mux show up? Is it that the mux is missing, or the services, or the channels?

The mux is there but the channels are not found. When I delete the mux, it is found again but "looks different" than the other muxes: it has no description.
Please see attached picture 2.

The used adapter (picture 1): Digital Devices Cine C/T/T2 V7, Dual DVB-C/DVB-T/T2 PCIe
In picture 3 you can see, that other hd channels are found (and working)

More details to the used software:
- debian 7.4
- Tvheadend 3.4.27~gfbda802~wheezy

eins.jpg (157 KB) eins.jpg adapter details
zwei.jpg (242 KB) zwei.jpg mux details
drei.jpg (255 KB) drei.jpg channel details

RE: "Arte HD" is not found (S02, 114 MHz, 256QAM, 6900 KSym/s, TSID: 10014, ONID: 61441) - Added by Prof Yaffle over 10 years ago

Thoughts ... but try turning off "skip initial scan" and turning on "idle scanning" - don't forget to click 'save'.

Thoughts II ... why this frequency... is this particularly vulnerable to interference (e.g. radio), is the signal strength too weak to find service (doesn't explain why w_scan can see them)...

Thoughts III ... why is 122MHz QAM64 but all others QAM256 - are you sure this should be 256, therefore...

Thoughts IV ... does a different (later) version of tvheadend behave any differently...

Thoughts V ... can you try a different cable and/or a different socket ...

There are a number of threads on the Internet about losing channels from this mux, but there's no real theme (i.e. it's not a case of "we all used 10m of cheap coax and look what happened").

RE: "Arte HD" is not found (S02, 114 MHz, 256QAM, 6900 KSym/s, TSID: 10014, ONID: 61441) - Added by Thomas Kovacs over 10 years ago

Thank you for your reply.
10 minutes ago, my newly installed system came to live.
This time I used trusty as a base system. And now all channels were found.
Why? I have no clue - but I am happy with this set-up. (And the disk image is already saved on a DVD, just in case...)

    (1-4/4)