Forums » Descrambling »
Hardware CAM startup/init loops
Added by Lars Rasmussen about 6 years ago
Hello,
I've just got a Digital Devices DVB-T tuner and a CAM module for it. My problem is that the CAM dosen't start/inited properly.
I'm running build 4.3-1292~g9b9ee6859~bionic on Ubuntu Server 18.04.1 Bionic.
It process just loops:
2018-08-21 17:17:06.905 linuxdvb: dvbca0-0: CAM slot 0 status changed to module init 2018-08-21 17:17:07.635 linuxdvb: dvbca0-0: CAM slot 0 status changed to module connected 2018-08-21 17:17:08.572 en50221: dvbca2-slot0-app00020041/0002: CAM INFO: MODULE BOXER, 01, 4A60, 0001 2018-08-21 17:17:09.076 en50221: dvbca2-slot0: communication stalled for more than 500ms 2018-08-21 17:17:13.162 linuxdvb: dvbca0-0: CAM slot 0 status changed to module init 2018-08-21 17:17:14.169 linuxdvb: dvbca0-0: CAM slot 0 status changed to module connected 2018-08-21 17:17:16.691 en50221: dvbca2-slot0-app00020041/0002: CAM INFO: MODULE BOXER, 01, 4A60, 0001 2018-08-21 17:17:17.444 en50221: dvbca2-slot0: communication stalled for more than 500ms 2018-08-21 17:17:21.522 linuxdvb: dvbca0-0: CAM slot 0 status changed to module init 2018-08-21 17:17:22.278 linuxdvb: dvbca0-0: CAM slot 0 status changed to module connected 2018-08-21 17:17:24.800 en50221: dvbca2-slot0-app00020041/0002: CAM INFO: MODULE BOXER, 01, 4A60, 0001 2018-08-21 17:17:25.303 en50221: dvbca2-slot0: communication stalled for more than 500ms 2018-08-21 17:17:29.431 linuxdvb: dvbca0-0: CAM slot 0 status changed to module init 2018-08-21 17:17:30.187 linuxdvb: dvbca0-0: CAM slot 0 status changed to module connected 2018-08-21 17:17:32.711 en50221: dvbca2-slot0-app00020041/0002: CAM INFO: MODULE BOXER, 01, 4A60, 0001 2018-08-21 17:17:33.465 en50221: dvbca2-slot0: communication stalled for more than 500ms
I hope someone can help.
Regards,
Lars
Replies (12)
RE: Hardware CAM startup/init loops - Added by Lars Rasmussen about 6 years ago
Hello,
I've added some more details in my first post.
I still hope that someone can help since the hardware wasn't cheap.
Regards,
Lars
RE: Hardware CAM startup/init loops - Added by saen acro about 6 years ago
with version of DD module you use
RE: Hardware CAM startup/init loops - Added by Lars Rasmussen about 6 years ago
I'm sorry but I'm not sure what you mean by DD then. The drivers should be in the kernel since 4.14 (https://www.digital-devices.eu/shop/en/custom/index/sCustom/102). I'm running 4.15.0-32-generic.
RE: Hardware CAM startup/init loops - Added by saen acro about 6 years ago
lets make simple test:
stop tvheadend service
using gnutv -cammenu do you have access to CAM
p.s.
Modul is CI or CI+
RE: Hardware CAM startup/init loops - Added by Lars Rasmussen about 6 years ago
I've stopped the service and ran the command (after installing dvb-apps) but there is nothing displayed in the terminal. The command is running (had to ctrl+c to exit it) but again noting is displayed.
It's a CI module.
RE: Hardware CAM startup/init loops - Added by Lars Rasmussen about 6 years ago
It's a Neotion PRD-MCV3-4010. I have attached some pictures of it.
IMG_20180821_065058.jpg (2.08 MB) IMG_20180821_065058.jpg | |||
IMG_20180821_065053.jpg (1.94 MB) IMG_20180821_065053.jpg |
RE: Hardware CAM startup/init loops - Added by saen acro about 6 years ago
Until someone confirm it is supported (cam module)
why not use regular card reader + oscam
RE: Hardware CAM startup/init loops - Added by Lars Rasmussen about 6 years ago
My parents also got TV from the same provider (Boxer TV) and i discovered that one of their TVs got a CAM in it from another manufacturer. I've lent it and it works They agreed to swap mine with theirs.
Thank you for your help @saen arco
RE: Hardware CAM startup/init loops - Added by saen acro about 6 years ago
Lars Rasmussen wrote:
My parents also got TV from the same provider (Boxer TV) and i discovered that one of their TVs got a CAM in it from another manufacturer. I've lent it and it works They agreed to swap mine with theirs.
Thank you for your help @saen arco
write to DD support at
[email protected]
http://support.digital-devices.eu
Write about model of CI module and problems with you have,
hope they fix issue.