Project

General

Profile

This project is closed and read-only.

Actions
History

WikiStart » Building » Packaging »

Tvheadend gentoo » History » Revision 13

« Previous | Revision 13/16 (diff) | Next »
William Peters, 2010-10-29 13:08

This article describes how to build Tvheadend from source

Make sure you have avahi and subversion installed, these are required to build Tvheadend

# emerge -av avahi subversion

now create the following directories

mkdir -p /opt/tvheadend/src

now you need to check out the Tvheadend source code using svn

svn co svn://svn.lonelycoder.com/hts/trunk/tvheadend /opt/tvheadend/src/

now you need to prepare the Tvheadend source code

cd /opt/tvheadend/src
./configure --prefix=/opt/tvheadend

if all went well you can compile the Tvheadend source code

make

If the source is compiled with no errors you can install the compiled source

make install

if you want you can also create this init script to start Tvheadend at boot time

/etc/init.d/tvheadend

#!/sbin/runscript
# Copyright 1999-2010 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header:

depend() {
        need net
}

start() {
        ebegin "Starting tvheadend" 
        start-stop-daemon --start \
                --user ${TVHUSER} \
                --exec ${TVHBIN} -- -C -f
        eend $?
}

stop() {
        ebegin "Stopping tvheadend" 
        start-stop-daemon --stop --quiet --name ${TVHNAME} --signal 2
        eend $?
}

/etc/conf.d/tvheadend

# /etc/conf.d/tvheadend: config file for /etc/init.d/tvheadend

TVHROOT="/opt/tvheadend" 
TVHNAME="tvheadend" 
TVHBIN="${TVHROOT}/bin/${TVHNAME}" 
TVHUSER="${TVHNAME}"

now set /etc/init.d/tvheadend as executable

chmod +x /etc/init.d/tvheadend

Create the tvheadend and add tvheadend to the group video

useradd -d /opt/tvheadend/home/ -G tvheadend -s /sbin/nologin -m tvheadend
gpasswd -a tvheadend video

now you can try to start Tvheadend

/etc/init.d/tvheadend start

if this works fine you can also add it to runlevel default so Tvheadend starts automatically

rc-update add tvheadend default

now you can go to http://hostname:9981/ and start using/configuring Tvheadend

Updated by William Peters almost 16 years ago · 16 revisions