RemoteTuner » History » Version 3
Jaroslav Kysela, 2019-03-05 12:58
| 1 | 1 | Jaroslav Kysela | h1. Remote Tuner |
|---|---|---|---|
| 2 | |||
| 3 | In some cases, the development might be more effective, if the problematic live streams can be used directly through internet. It may apply for EPG, but also for other real-time data. |
||
| 4 | |||
| 5 | 2 | Jaroslav Kysela | h2. SAT>IP Server - Minisatip |
| 6 | 1 | Jaroslav Kysela | |
| 7 | 3 | Jaroslav Kysela | Setup minisatip https://github.com/catalinii/minisatip and forward only the RTSP port (usually TCP port 443) outside. We can use the embedded MPEG-TS data in the RTSP session, so this only port forwarding is sufficient. Contact the developer through PM to obtain the IP address which will be used for the debugging. |
| 8 | 1 | Jaroslav Kysela | |
| 9 | 2 | Jaroslav Kysela | Example - RTSP on TCP port 5544, enable only /dev/dvb/adapter2: |
| 10 | |||
| 11 | <pre> |
||
| 12 | minisatip -y 5544 -e 2 |
||
| 13 | </pre> |
||
| 14 | |||
| 15 | h2. SAT>IP Server - Tvheadend |
||
| 16 | 1 | Jaroslav Kysela | |
| 17 | You can also enable the SAT>IP server directly in the tvheadend. But (to not stack the possible problems), the minisatip SAT>IP server is preferred. |