Custom MPEG-TS Input » History » Version 26
Jaroslav Kysela, 2015-10-27 17:45
1 | 1 | Jaroslav Kysela | h1. Custom MPEG-TS Input |
---|---|---|---|
2 | |||
3 | h2. Requirement |
||
4 | |||
5 | 2 | Jaroslav Kysela | The TVHeadend 3.9.2100 and up for the pipe:// URL support. Note that TVHeadend expects the input in the raw MPEG-TS format with correct PAT/PMT tables. |
6 | 1 | Jaroslav Kysela | |
7 | h2. IPTV URLs |
||
8 | |||
9 | 18 | Jaroslav Kysela | **Note: Always try the command without pipe:// prefix on standard command line, if it works with a stdout redirection to a file!!** |
10 | 5 | Jaroslav Kysela | |
11 | 11 | Jaroslav Kysela | h3. Streaming from a file |
12 | |||
13 | 15 | Jaroslav Kysela | Use option -re for the input specification to stream the file at native frame rate. |
14 | 11 | Jaroslav Kysela | |
15 | <pre> |
||
16 | -re (input) |
||
17 | |||
18 | Read input at native frame rate. Mainly used to simulate a grab |
||
19 | device. or live input stream (e.g. when reading from a file). |
||
20 | Should not be used with actual grab devices or live input streams |
||
21 | (where it can cause packet loss). By default ffmpeg attempts to |
||
22 | read the input(s) as fast as possible. This option will slow down |
||
23 | the reading of the input(s) to the native frame rate of the |
||
24 | input(s). It is useful for real-time output (e.g. live streaming). |
||
25 | </pre> |
||
26 | |||
27 | 10 | Nicolas C | h3. Internet Radios |
28 | 1 | Jaroslav Kysela | |
29 | 23 | dhead 666 | **Note: FFmpeg flag '-tune zerolatency' depends on the x264 encoder (libx264), remove the flag if x264 encoder isn't available on your system (e.g. OpenELEC).** |
30 | 22 | dhead 666 | |
31 | 21 | dhead 666 | From ffmpeg v2.6 and on one can set the service type of the mpegts stream as radio. |
32 | <pre> |
||
33 | pipe:///usr/bin/ffmpeg -loglevel fatal -i INPUTLINK -vn -acodec copy -metadata service_provider=RADIOPROVIDER |
||
34 | -metadata service_name=RADIONAME -tune zerolatency -f mpegts -mpegts_service_type digital_radio pipe:1 |
||
35 | </pre> |
||
36 | 1 | Jaroslav Kysela | |
37 | 21 | dhead 666 | With older ffmpeg releases the mpegts service type cannot be set correctly so the audio stream will be listed as a TV channel, you can use a static image that will be shown with the audio stream (the Radio Logo maybe?). |
38 | |||
39 | 11 | Jaroslav Kysela | <pre> |
40 | pipe:///usr/bin/ffmpeg -loglevel fatal -loop 1 -y -i /path/to/image.png -re -i INPUTLINK |
||
41 | 1 | Jaroslav Kysela | -vcodec libx264 -acodec copy -mbd rd -copyinkf -flags +ilme+ildct -fflags +genpts |
42 | 10 | Nicolas C | -metadata service_provider=RADIOPROVIDER -metadata service_name=RADIONAME -tune zerolatency -f mpegts pipe:1 |
43 | 20 | Jaroslav Kysela | </pre> |
44 | 19 | Jaroslav Kysela | |
45 | 25 | Jaroslav Kysela | h4. For H264/HEVC video, the mp4toannexb filter must be used for MP4 video streams |
46 | 24 | Jaroslav Kysela | |
47 | <pre> |
||
48 | 1 | Jaroslav Kysela | -bsf:v h264_mp4toannexb,dump_extra |
49 | 25 | Jaroslav Kysela | -bsf:v hevc_mp4toannexb,dump_extra |
50 | 1 | Jaroslav Kysela | |
51 | 26 | Jaroslav Kysela | pipe:///usr/bin/ffmpeg -loglevel fatal -user-agent Kodi/14.1 -i http://INPUT -codec copy -bsf:v h264_mp4toannexb,dump_extra -metadata service_provider=PROVIDER -metadata service_name=SERVICE -tune zerolatency -f mpegts pipe:1 |
52 | </pre> |
||
53 | 24 | Jaroslav Kysela | |
54 | 11 | Jaroslav Kysela | h3. Transcoding |
55 | 10 | Nicolas C | |
56 | 1 | Jaroslav Kysela | YMMV with different ffmpeg/libav versions. In Red Hat's (Fedora/Centos) build of ffmpeg, aac transcoding is experimental, so you have to enable -strict -2 |
57 | |||
58 | 10 | Nicolas C | <pre> |
59 | 13 | Jaroslav Kysela | pipe:///usr/bin/ffmpeg -loglevel fatal -i INPUTLINK -vcodec libx264 -acodec aac -strict -2 -mbd rd -copyinkf -flags +ilme+ildct -fflags +genpts |
60 | 11 | Jaroslav Kysela | -metadata service_provider=STRING -metadata service_name=STRING -f mpegts -tune zerolatency pipe:1 |
61 | 10 | Nicolas C | </pre> |
62 | |||
63 | Try to transcode as little as possible, since it will impact your cpu usage. And if you're using tvheadend to re-transcode... well.. |
||
64 | |||
65 | So if your channel already has aac audio, maybe you only need to transcode the video stream. |
||
66 | |||
67 | <pre> |
||
68 | 13 | Jaroslav Kysela | pipe:///usr/bin/ffmpeg -loglevel fatal -i INPUTLINK -vcodec libx264 -acodec copy -mbd rd -copyinkf -flags +ilme+ildct -fflags +genpts |
69 | 6 | Jaroslav Kysela | -metadata service_provider=STRING -metadata service_name=STRING -f mpegts -tune zerolatency pipe:1 |
70 | 7 | Jaroslav Kysela | </pre> |
71 | 6 | Jaroslav Kysela | |
72 | 14 | Jaroslav Kysela | h3. Direct copy (container only change) |
73 | 8 | Jaroslav Kysela | |
74 | 6 | Jaroslav Kysela | <pre> |
75 | 1 | Jaroslav Kysela | pipe:///usr/bin/ffmpeg -loglevel fatal -i INPUTLINK -vcodec copy -acodec copy -metadata service_provider=STRING |
76 | -metadata service_name=STRING -f mpegts -tune zerolatency pipe:1 |
||
77 | </pre> |
||
78 | |||
79 | 16 | Nicolas C | h3. Cookie-protected HLS Streams |
80 | ffmpeg is not the smartest cookie in the jar handling cookies (pun intended). So while you can insert cookies using the -cookie option, and alternative option is using Squid with request_add_header option |
||
81 | |||
82 | <pre> |
||
83 | request_header_add Cookie 'YOUR COOKIE CONTENT' all |
||
84 | </pre> |
||
85 | |||
86 | The trailing all refers to the ACL it applies to. Please read the full documentation on how to implement this on the Squid Website (http://www.squid-cache.org/Doc/config/request_header_add/) |
||
87 | 17 | Nicolas C | |
88 | 1 | Jaroslav Kysela | h2. Other solutions (HTTP proxy) |
89 | |||
90 | 10 | Nicolas C | |
91 | 11 | Jaroslav Kysela | "A simple ffmpeg HTTP proxy using nodejs":https://github.com/Jalle19/node-ffmpeg-mpegts-proxy |