Project

General

Profile

Actions
Copy link

Bug #5748

open

Usability Bug DVB-S2 Tuner Configuration Master Tuner

Added by Seriously No over 5 years ago. Updated over 5 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
User Interface
Target version:
-
Start date:
2019-10-17
Due date:
% Done:

0%

Estimated time:
Found in version:
4.2
Affected Versions:

Description

Setup:

|---- SAT Tuner 1 (DVB-S2)
Single-LNB --- Cable --<
|---- SAT Tuner 2 (DVB-S2)

Procedure:
I added a second TV Tuner to the TVH and did not set the network in the tuner menu (of SAT Tuner 2). Instead, I immediately configured the master tuner (SAT Tuner 1).

Problem:
I was not able to use the second tuner. TVH always stated that there was no free tuner device left.

Solution:
I removed the tuners in the input directory and reinstalled both tuners. For the second tuner i immediately added the network and than it worked flawlessly.

Bug:
The problem was that without removing the files in the input directory I was not able to add the Network at a later stage. Nevertheless, I think that if someone is setting a master tuner that it should be logical that it is the same network as the master tuner. For that reason, if the network is missing at a slave tuner than TVH should automatically set the network of the master tuner.

Actions
Copy link

Also available in: Atom PDF