Tvheadend

Jaroslav Kysela wrote:

Applied in changeset commit:tvheadend|302169813ebfc6860fcc7824e2463dede10c12eb.

Memory leak continue, after 1 day work get 1 gb memory, before don't use too much memory.

Is anything goes by websockets currently?
check box enabled/disabled will be good solution.

Petar Ivanov wrote:

Memory leak continue, after 1 day work get 1 gb memory, before don't use too much memory.

Just checked, I am also still leaking memory (but at a lot slower rate then before the websocket fix). 2Gb mem in use after 24 hours uptime on my setup.
I have no leakage on my dvb-c SAT/IP tvheadend server (also running rev 30216981). But I never use the webinterface of that machine.

Just restarted the frontend tvheadend server and will let it run for another 24hours without using the webinterface and report back here if it still is eating memory.
Then we know for sure if it's leaking in the new websocket code or not.

saen acro wrote:

Is anything goes by websockets currently?
check box enabled/disabled will be good solution.

Open web interface by Chrome browser.
Where is this box enable/disable ?

Jeroen Hendriks wrote:

Petar Ivanov wrote:

Memory leak continue, after 1 day work get 1 gb memory, before don't use too much memory.

Just checked, I am also still leaking memory (but at a lot slower rate then before the websocket fix). 2Gb mem in use after 24 hours uptime on my setup.
I have no leakage on my dvb-c SAT/IP tvheadend server (also running rev 30216981). But I never use the webinterface of that machine.

Just restarted the frontend tvheadend server and will let it run for another 24hours without using the webinterface and report back here if it still is eating memory.
Then we know for sure if it's leaking in the new websocket code or not.

Year, not too fast, but 1gb for 24 hours, before i have 2 months uptime and not too much memory used.

Petar Ivanov wrote:

Where is this box enable/disable ?

That's what we need.
When something is not used why to work?

Jaroslav Kysela wrote:

Applied in changeset commit:tvheadend|302169813ebfc6860fcc7824e2463dede10c12eb.

Jaroslav can you set the issue back to OPEN? It's not fixed 100%

Did a 24 hour test run (no usage of the webinterface) and it went from 350Mb to 417Mb memory usage. I think that ok since a lot is running within tvheadend(recordings, ota egp, live tv to kodi etc etc.

But when the webinterface is used (status screen, epg, managing recordings etc) it goes from 350Mb usage to 2Gb and more after 24 hours of uptime.
Something is still not ok in the new web code.

Jaroslav Kysela wrote:

Do you see a big difference for some items in debugging / memory information entries when the memory consumption is increased ?

I'm seeing this on my Banana Pi running Armbian, I opened #4521 so you may want to close mine :) Will setup a script to pull in debugging json data every hour & report back.

I found another problem in the websocket code, pls test v4.3-331-ge489a4adb .

Jaroslav Kysela wrote:

Do you see a big difference for some items in debugging / memory information entries when the memory consumption is increased ?

No there is everything normal. Going to test v4.3-331-ge489a4adb now :)

Jeroen Hendriks wrote:

Jaroslav Kysela wrote:

Do you see a big difference for some items in debugging / memory information entries when the memory consumption is increased ?

No there is everything normal. Going to test v4.3-331-ge489a4adb now :)

Thanks, it looks ok again. Usage stays around 400Mb with the webinterface open in IE and firefox.

Confirms. No anymore memory leaks, running more than 24 hours with open webinterface in 2 Chrome and from Smart TV and used 300 mb.