Project

General

Profile

Actions

Bug #4333

closed

Cannot connect to external SATIP server

Added by Laurie Davis almost 8 years ago. Updated almost 8 years ago.

Status:
Fixed
Priority:
Normal
Assignee:
-
Category:
SAT>IP
Target version:
-
Start date:
2017-04-25
Due date:
% Done:

100%

Estimated time:
Found in version:
2545
Affected Versions:

Description

I have a Windows PC running DVBViewer Recording Server which can act as a SATIP server. This has five tuners - two DVB-C and three DVB-T2. Many months ago when I last looked at this, I managed to get TVH to connect to DVBViewer RS and use it's tuners ok, but I haven't tried again recently until now, and I cannot get it to work now.

Basically, TVH sees all five tuners and for the sake of simplicity I only enable the first DVB-T2 tuner to test. Note, I have the TVH config set to "DVBC-2,DVBT2-3" on the tuner config page otherwise TVH detects the remote tuners in the wrong order and tries to use the wrong one (see bug #4016). With TVH idle, if I use VLC to try and play a channel, it fails to connect with "service instance is bad, reason: No input detected". It does this for whatever channel I choose. However...if I trigger an OTA EPG grab, this connects and works. If I then try and play a channel on the same mux as the grab is active on - it works!

It seems to be a problem with TVH doing the initial tune when trying to play a channel, but there is no problem when it tunes for the EPG grab. Also, trying to do a channel scan on a mux doesn't work either.

Attached is a trace log showing the RTSP comms, but everything looks ok to me. I am using build 4.1.2545


Files

tvh.log (101 KB) tvh.log Laurie Davis, 2017-04-25 15:25
Actions

Also available in: Atom PDF