Bug #4009
OTA EIT Grabber only scans one service
100%
Description
Recently upgraded from 4.0.8 to 4.1-2249. Before this everything was working.
(using AVM Fritz DVB-C as IPTV source)
The OTA EIT grabber only gathers the guide for one channel (always the same), even if I'll trigger it manually.
Alle services/muxes have the same configuration.
The EPG will be fetched as soon as I tune an other channel or if I'll enable idle scan oder initial scan.
Alrey tried a fresh installation with a config from the scratch.
Files
History
Updated by Jaroslav Kysela about 8 years ago
Provide '--trace epggrab' . https://tvheadend.org/projects/tvheadend/wiki/Traces
Updated by sebastian s. about 8 years ago
- File epggrab-trace-log.log epggrab-trace-log.log added
Jaroslav Kysela wrote:
Provide '--trace epggrab' . https://tvheadend.org/projects/tvheadend/wiki/Traces
Done.
Updated by Jaroslav Kysela about 8 years ago
This does not appear like a complete log. Are you sure that line
2016-10-03 20:34:01.601 [ TRACE]:epggrab: mux dvbc.m3u - N24 Doku in avm_auto (0xb7f907e8) stop
is last? There should be another kick call to process another muxes.
Updated by sebastian s. about 8 years ago
Jaroslav Kysela wrote:
This does not appear like a complete log. Are you sure that line
[...]
is last? There should be another kick call to process another muxes.
Yep, that's the problem. The epggrab stops after one service. The log is complete.
Updated by Jaroslav Kysela about 8 years ago
- Status changed from New to Fixed
- % Done changed from 0 to 100
Applied in changeset commit:tvheadend|91d28cc52176944f0d7c7a1106c2119f3dc3ef5b.
Updated by sebastian s. about 8 years ago
Jaroslav Kysela wrote:
Applied in changeset commit:tvheadend|91d28cc52176944f0d7c7a1106c2119f3dc3ef5b.
It's working now.
Thanks for the fast fix.