Bug #3971
Bug #4851: TVH freezes: mpegts: too much queued table input data (over 2MB), discarding new
Constant "mpegts: too much queued table input data (over 2MB), discarding new" warnings causing TVheadend to become unresponsive
0%
Description
I often get "mpegts: too much queued table input data (over 2MB), discarding new" warnings during the epggrab.
For example this morning they started at 02:04 when the cron job started and kept going until I rebooted the box at 06:00.
When they occur I am unable to access the webinterface and recordings don't take place.
I'm running TVH on a Wetek Play with Libreelec 7.02
EIT: DVB Grabber and UK: Freesat OTA grabbers.
A logfile is attached.
Files
History
Updated by C K about 8 years ago
Updated by Getting this error, too.
WebUI/HTSP not responding. Running TVH in a screen session, not responing to a ctrl-c.
Updated by Jaroslav Kysela about 8 years ago
Updated by Note that the message is only a consequence of something else. It's triggered when the CPU is busy or another problem in tvh, so tvh starts to drop input data.
Please, provide a piece of log when this happen - "--trace gtimer,mtimer" . https://tvheadend.org/projects/tvheadend/wiki/Traces . Note that tvh must be compiled with --enable-gtimer_check (see About dialog - configuration).
Updated by C K about 8 years ago
Jaroslav Kysela wrote:
Note that the message is only a consequence of something else. It's triggered when the CPU is busy or another problem in tvh, so tvh starts to drop input data.
Please, provide a piece of log when this happen - "--trace gtimer,mtimer" . https://tvheadend.org/projects/tvheadend/wiki/Traces . Note that tvh must be compiled with --enable-gtimer_check (see About dialog - configuration).
Thanks. Will recompile on next occurrence and run with trace enabled. TVH runs without problems at the moment.
Updated by C K about 8 years ago
C K wrote:
Jaroslav Kysela wrote:
Note that the message is only a consequence of something else. It's triggered when the CPU is busy or another problem in tvh, so tvh starts to drop input data.
Please, provide a piece of log when this happen - "--trace gtimer,mtimer" . https://tvheadend.org/projects/tvheadend/wiki/Traces . Note that tvh must be compiled with --enable-gtimer_check (see About dialog - configuration).
Thanks. Will recompile on next occurrence and run with trace enabled. TVH runs without problems at the moment.
Strange. TVH runs fine atm. Will continue logging.
Updated by C K about 8 years ago
C K wrote:
C K wrote:
Jaroslav Kysela wrote:
Note that the message is only a consequence of something else. It's triggered when the CPU is busy or another problem in tvh, so tvh starts to drop input data.
Please, provide a piece of log when this happen - "--trace gtimer,mtimer" . https://tvheadend.org/projects/tvheadend/wiki/Traces . Note that tvh must be compiled with --enable-gtimer_check (see About dialog - configuration).
Thanks. Will recompile on next occurrence and run with trace enabled. TVH runs without problems at the moment.
Strange. TVH runs fine atm. Will continue logging.
Here is a short log: https://gist.github.com/ckarrie/a2f226685b1fb343a5aac443cb7e7580
Updated by Jaroslav Kysela about 8 years ago
Thanks. Unfortunately, no hint for me where the problem might be. Could you look if CPU is on 100% usage when this situation occurs? Also, it would be really good to analyze backtrace, too. https://tvheadend.org/projects/tvheadend/wiki/Debugging (see chapter 'Dead or Live Lock').
Updated by C K about 8 years ago
Jaroslav Kysela wrote:
Thanks. Unfortunately, no hint for me where the problem might be. Could you look if CPU is on 100% usage when this situation occurs? Also, it would be really good to analyze backtrace, too. https://tvheadend.org/projects/tvheadend/wiki/Debugging (see chapter 'Dead or Live Lock').
Note for myself:
Processes:
top -H
GDB:
pid = ps -C tvheadend sudo gdb build.linux/tvheadend <PID> (gdb) set logging on (gdb) set pagination off (gdb) thread apply all bt full (gdb) generate-core-file
Updated by saen acro almost 8 years ago
Updated by I have same problem but strange I see is bit-rate it variate,
output it more then input, transcoding not used.
Updated by C K almost 8 years ago
saen acro wrote:
I have same problem but strange I see is bit-rate it variate,
output it more then input, transcoding not used.
I think that just buffering/timeshifting. Try to run TVH with gdb, see comments above.
Updated by saen acro almost 8 years ago
C K wrote:
saen acro wrote:
I have same problem but strange I see is bit-rate it variate,
output it more then input, transcoding not used.I think that just buffering/timeshifting. Try to run TVH with gdb, see comments above.
No timeshift is off, ethernet is gigabit, no cpu peaks i5-650@3200Mhz
but there is a kernel message
TCP: request_sock_TCP: Possible SYN flooding on port 9981. Sending cookies. Check SNMP counters.
Updated by saen acro almost 8 years ago
> uname -a Linux SVER 4.4.0-57-generic #78~14.04.1-Ubuntu SMP Sat Dec 10 00:14:47 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux kernel: [ 40.170303] TCP: request_sock_TCP: Possible SYN flooding on port 9981. Sending cookies. Check SNMP counters. kernel: [ 40.185854] TCP: request_sock_TCP: Possible SYN flooding on port 9982. Sending cookies. Check SNMP counters.
Tested with various version of TVH and situation is similar.
Even /playlist and /xmltv refuse to open
Updated by saen acro almost 8 years ago
Update:
There is a problem with kernel 4.4 and up with build in SYN protection
http://tvheadend.org/issues/4152
Updated by saen acro almost 8 years ago
Some more clues
In browser I see lot not responses
Browser request data from url
:9981/api/status/subscriptions?_dc=1483282972654
but no responce receved
also from
:9981/api/mpegts/network/builders?_dc=1483283030136 :9981/api/idnode/load
all requests from
:9981/comet/poll
pass corectly
Updated by saen acro almost 8 years ago
tame taken to get stream
Jan 01 18:24:31: INFO: Starting Astra SM 0.2.85 Jan 01 18:24:32: INFO: Bitrate: 0 Kbit/s Jan 01 18:24:33: INFO: Bitrate: 0 Kbit/s Jan 01 18:24:34: INFO: Bitrate: 0 Kbit/s Jan 01 18:24:35: INFO: Bitrate: 0 Kbit/s Jan 01 18:24:36: INFO: Bitrate: 0 Kbit/s Jan 01 18:24:37: INFO: Bitrate: 0 Kbit/s Jan 01 18:24:38: INFO: Bitrate: 0 Kbit/s Jan 01 18:24:39: INFO: Bitrate: 4897 Kbit/s Jan 01 18:24:39: ERROR: CC: PID:18=1 Jan 01 18:24:40: INFO: Bitrate: 4671 Kbit/s Jan 01 18:24:41: INFO: Bitrate: 5805 Kbit/s Jan 01 18:24:42: INFO: Bitrate: 4837 Kbit/s
in same time same channel watched using same tuner
Updated by saen acro almost 8 years ago
when 2+ clents watching time rise up
./astra --analyze http://localhost:9981/stream/channelid/387842520 --debug Jan 01 18:36:16: INFO: Starting Astra SM 0.2.85 Jan 01 18:36:17: INFO: Bitrate: 0 Kbit/s Jan 01 18:36:18: INFO: Bitrate: 0 Kbit/s Jan 01 18:36:19: INFO: Bitrate: 0 Kbit/s Jan 01 18:36:20: INFO: Bitrate: 0 Kbit/s Jan 01 18:36:21: INFO: Bitrate: 0 Kbit/s Jan 01 18:36:22: INFO: Bitrate: 0 Kbit/s Jan 01 18:36:23: INFO: Bitrate: 0 Kbit/s Jan 01 18:36:24: INFO: Bitrate: 0 Kbit/s Jan 01 18:36:25: INFO: Bitrate: 0 Kbit/s Jan 01 18:36:26: ERROR: [analyze] HTTP Error: 0:response timeout Jan 01 18:36:26: DEBUG: [core] immediate exit requested, rc=1 # ./astra --analyze http://localhost:9981/stream/channelid/387842520 --debug Jan 01 18:36:35: INFO: Starting Astra SM 0.2.85 Jan 01 18:36:36: INFO: Bitrate: 0 Kbit/s Jan 01 18:36:37: INFO: Bitrate: 0 Kbit/s Jan 01 18:36:38: INFO: PAT: tsid: 5 Jan 01 18:36:38: INFO: PAT: pid: 517 PMT pnr: 204 Jan 01 18:36:38: INFO: PAT: crc32: 0x26229128 Jan 01 18:36:38: INFO: PMT: pnr: 204 Jan 01 18:36:38: INFO: PMT: pid: 515 PCR Jan 01 18:36:38: INFO: VIDEO: pid: 515 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B) Jan 01 18:36:38: INFO: VIDEO: Stream ID: 24 Jan 01 18:36:38: INFO: VIDEO: descriptor: 0x02031A445F Jan 01 18:36:38: INFO: VIDEO: descriptor: 0x060102 Jan 01 18:36:38: INFO: VIDEO: Maximum bitrate: 110 Jan 01 18:36:38: INFO: VIDEO: descriptor: 0x28046400283F Jan 01 18:36:38: INFO: AUDIO: pid: 516 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03) Jan 01 18:36:38: INFO: AUDIO: Stream ID: 25 Jan 01 18:36:38: INFO: AUDIO: Language: eng Jan 01 18:36:38: INFO: AUDIO: descriptor: 0x030167 Jan 01 18:36:38: INFO: AUDIO: Maximum bitrate: 329 Jan 01 18:36:38: INFO: AUDIO: pid: 518 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03) Jan 01 18:36:38: INFO: AUDIO: Stream ID: 26 Jan 01 18:36:38: INFO: AUDIO: Language: bul Jan 01 18:36:38: INFO: AUDIO: descriptor: 0x030167 Jan 01 18:36:38: INFO: AUDIO: Maximum bitrate: 329 Jan 01 18:36:38: INFO: PMT: crc32: 0x7C2B162B Jan 01 18:36:38: INFO: Bitrate: 1675 Kbit/s Jan 01 18:36:38: ERROR: CC: PID:0=1 PID:18=1 PID:515=1 PID:516=1 PID:518=1 Jan 01 18:36:39: INFO: SDT: tsid: 5 Jan 01 18:36:39: INFO: SDT: sid: 204 Jan 01 18:36:39: INFO: SDT: Service: National Geographic HD Jan 01 18:36:39: INFO: SDT: Provider: BULSATCOM Jan 01 18:36:39: INFO: SDT: crc32: 0x76CFB843 Jan 01 18:36:39: INFO: Bitrate: 4124 Kbit/s Jan 01 18:36:39: ERROR: CC: PID:17=1 Jan 01 18:36:40: INFO: Bitrate: 3321 Kbit/s Jan 01 18:36:41: INFO: Bitrate: 2983 Kbit/s Jan 01 18:36:42: INFO: Bitrate: 2789 Kbit/s Jan 01 18:36:43: INFO: Bitrate: 2870 Kbit/s Jan 01 18:36:44: INFO: Bitrate: 2905 Kbit/s Jan 01 18:36:45: INFO: Bitrate: 2702 Kbit/s Jan 01 18:36:46: INFO: Bitrate: 2971 Kbit/s Jan 01 18:36:47: INFO: Bitrate: 2832 Kbit/s Jan 01 18:36:48: INFO: Bitrate: 3334 Kbit/s Jan 01 18:36:49: INFO: Bitrate: 3693 Kbit/s
Updated by Jaroslav Kysela almost 8 years ago
Provide tvh log for '--trace thread,linuxdvb,mtimer,gtimer' for the above scenario (2+ clients).
Updated by saen acro almost 8 years ago
- File tvh_debug.rar tvh_debug.rar added
There is a some interesting thing
during log creation i play tv from web interface
each time when new message come
/mpegts: too much queued table input data (over 2MB), discarding new/
web stream stops
Updated by Jaroslav Kysela almost 8 years ago
One bad thing (last log) is that it's required approx. 200ms to get the frontend status:
2017-01-01 23:15:15.745 [ TRACE]:linuxdvb: #6 - checking FE status (ready) 2017-01-01 23:15:15.961 [ TRACE]:linuxdvb: #6 - status 1 (001F)
But it should not block tvh too much.
Please, configure and compile tvh with --enable-gtimer_check and provide the traces again (comment 16).
Updated by saen acro almost 8 years ago
- File tvhlog.rar tvhlog.rar added
Test started
with last version
http: user_ip: HTTP/1.1 GET /dist/purify.min.js.map -- 1
DevTools failed to parse SourceMap: http://TVH_IP:9981/dist/purify.min.js.map
Updated by Jaroslav Kysela almost 8 years ago
Hmm.. It seems that linux dvbapi ioctls are too costly (time) on your hardware:
mtimer: src/input/mpegts/linuxdvb/linuxdvb_frontend.c:737:linuxdvb_frontend_monitor duration 1294728us
Which hardware / driver do you use?
Basically, this callback checks for the tuner status and collects the statistics (signal, lost packets in the demodulator, etc.). It should be done in few milliseconds. In your case, the callback takes ~1.3 second and it blocks all other parts in tvheadend which runs with the global lock. It means that the vital parts of tvheadend are blocked.
I think that the driver is wrong.
Updated by saen acro almost 8 years ago
TBS 6909 with latest crazycat driver
https://bitbucket.org/CrazyCat/linux-tbs-drivers.git
before to close his repo
with same driver Astra work perfect
Updated by Rainer Dorsch almost 8 years ago
Updated by I see the same symptoms here:
- Hardware: cubox-i (armv7l)
- TV adapter: Montage Technology M88DS3103 : DVB-S #0
- OS: xbian
- Kernel: 4.4.19+rt25+ #1 SMP PREEMPT RT
- tvheadend version: 2405
log file:
http://scw.bokomoko.de/~rd/tvheadend.log
Any insight would be welcome.
Thanks
Rainer
Updated by saen acro almost 8 years ago
@Rainer Dorsch
can you tell what is signal and SNR metered by TVH
In my case, I get Signal 94% Quality 34-44 for few seconds and then lot of time 0/0,
but stream is OK no pixelization or anything.
Updated by saen acro almost 8 years ago
Switched to https://github.com/tbsdtv/media_build.git
now signal is stable but now signal/snr is 74/62-81
will test more and write later
Updated by saen acro almost 8 years ago
2017-01-09 19:16:13.740 scanfile: DVB-S - loaded 1 regions with 112 networks 2017-01-09 19:16:13.740 scanfile: DVB-T - loaded 43 regions with 1106 networks 2017-01-09 19:16:13.740 scanfile: DVB-C - loaded 17 regions with 56 networks 2017-01-09 19:16:13.740 scanfile: ATSC-T - loaded 2 regions with 9 networks 2017-01-09 19:16:13.740 scanfile: ATSC-C - loaded 1 regions with 5 networks 2017-01-09 19:16:13.740 scanfile: ISDB-T - loaded 2 regions with 1297 networks 2017-01-09 19:16:16.218 mpegts: 12729V in DVB - tuning on #0 2017-01-09 19:16:16.218 subscription: 0008: "epggrab" unsubscribing 2017-01-09 19:16:16.238 subscription: 000A: "scan" subscribing to mux "12729V", weight: 5, adapter: "#0", network: "DVB", service: "Raw PID Subscription" 2017-01-09 19:16:17.425 linuxdvb: #0 - poll TIMEOUT 2017-01-09 19:16:17.674 linuxdvb: #0 - retune nodata 2017-01-09 19:16:18.771 linuxdvb: #5 - poll TIMEOUT 2017-01-09 19:16:18.793 linuxdvb: #6 - poll TIMEOUT 2017-01-09 19:16:18.798 linuxdvb: #3 - poll TIMEOUT 2017-01-09 19:16:18.804 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:16:18.804 linuxdvb: #2 - poll TIMEOUT 2017-01-09 19:16:18.805 linuxdvb: #4 - poll TIMEOUT 2017-01-09 19:16:18.805 linuxdvb: #7 - poll TIMEOUT 2017-01-09 19:16:19.095 linuxdvb: #5 - retune nodata 2017-01-09 19:16:19.147 linuxdvb: #6 - retune nodata 2017-01-09 19:16:19.251 linuxdvb: #3 - retune nodata 2017-01-09 19:16:19.294 linuxdvb: #4 - retune nodata 2017-01-09 19:16:19.460 linuxdvb: #2 - retune nodata 2017-01-09 19:16:19.486 linuxdvb: #1 - retune nodata 2017-01-09 19:16:19.652 linuxdvb: #7 - retune nodata 2017-01-09 19:16:19.812 mpegts: 12606H in DVB scan complete 2017-01-09 19:16:19.812 mpegts: 12647V in DVB - tuning on #1 2017-01-09 19:16:19.812 subscription: 0007: "epggrab" unsubscribing 2017-01-09 19:16:19.903 subscription: 000C: "scan" subscribing to mux "12647V", weight: 5, adapter: "#1", network: "DVB", service: "Raw PID Subscription" 2017-01-09 19:16:19.903 mpegts: 12688H in DVB scan complete 2017-01-09 19:16:19.903 mpegts: 12647H in DVB scan complete 2017-01-09 19:16:20.047 mpegts: 11135V in DVB - tuning on #2 2017-01-09 19:16:20.048 subscription: 0006: "epggrab" unsubscribing 2017-01-09 19:16:20.094 subscription: 000D: "scan" subscribing to mux "11135V", weight: 5, adapter: "#2", network: "DVB", service: "Raw PID Subscription" 2017-01-09 19:16:20.308 subscription: 0001: "94.xxx.xxx.8 [ saen | Kodi Media Center ]" unsubscribing from "NOVA", hostname="94.xxx.xxx.8", username="saen", client="Kodi Media Center" 2017-01-09 19:16:20.537 mpegts: 12524H in DVB - tuning on #7 2017-01-09 19:16:20.654 subscription: 000E: "94.xxx.xxx.8 [ saen | Kodi Media Center ]" subscribing on channel "bTV", weight: 150, adapter: "#7", network: "DVB", mux: "12524H", provider: "BULSATCOM", service: "bTV", profile="htsp", hostname="94.xxx.xxx.8", username="saen", client="Kodi Media Center" 2017-01-09 19:16:21.059 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:16:21.158 linuxdvb: #1 - retune nodata 2017-01-09 19:16:21.288 linuxdvb: #2 - poll TIMEOUT 2017-01-09 19:16:21.457 linuxdvb: #2 - retune nodata 2017-01-09 19:16:21.733 linuxdvb: #7 - poll TIMEOUT 2017-01-09 19:16:21.958 linuxdvb: #7 - retune nodata 2017-01-09 19:16:25.085 linuxdvb: #0 - poll TIMEOUT 2017-01-09 19:16:25.818 linuxdvb: #0 - retune nodata 2017-01-09 19:16:26.227 mpegts: 12729V in DVB - scan no data, failed 2017-01-09 19:16:26.227 subscription: 000A: "scan" unsubscribing 2017-01-09 19:16:26.227 mpegts: 11012V in DVB - tuning on #0 2017-01-09 19:16:26.298 subscription: 0010: "scan" subscribing to mux "11012V", weight: 5, adapter: "#0", network: "DVB", service: "Raw PID Subscription" 2017-01-09 19:16:26.431 linuxdvb: #5 - poll TIMEOUT 2017-01-09 19:16:26.450 linuxdvb: #5 - retune nodata 2017-01-09 19:16:26.453 linuxdvb: #6 - poll TIMEOUT 2017-01-09 19:16:26.459 linuxdvb: #3 - poll TIMEOUT 2017-01-09 19:16:26.465 linuxdvb: #4 - poll TIMEOUT 2017-01-09 19:16:26.502 linuxdvb: #6 - retune nodata 2017-01-09 19:16:26.564 linuxdvb: #4 - retune nodata 2017-01-09 19:16:26.670 linuxdvb: #3 - retune nodata 2017-01-09 19:16:27.551 linuxdvb: #0 - poll TIMEOUT 2017-01-09 19:16:27.701 linuxdvb: #0 - retune nodata 2017-01-09 19:16:28.720 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:16:28.948 linuxdvb: #2 - poll TIMEOUT 2017-01-09 19:16:29.209 linuxdvb: #1 - retune nodata 2017-01-09 19:16:29.394 linuxdvb: #7 - poll TIMEOUT 2017-01-09 19:16:29.697 linuxdvb: #2 - retune nodata 2017-01-09 19:16:29.949 mpegts: 12647V in DVB - scan no data, failed 2017-01-09 19:16:29.949 subscription: 000C: "scan" unsubscribing 2017-01-09 19:16:30.078 linuxdvb: #7 - retune nodata 2017-01-09 19:16:30.078 mpegts: 11135V in DVB - scan no data, failed 2017-01-09 19:16:30.078 subscription: 000D: "scan" unsubscribing 2017-01-09 19:16:30.631 mpegts: 12524H in DVB - scan no data, failed 2017-01-09 19:16:31.079 mpegts: 11135V in DVB - tuning on #2 2017-01-09 19:16:31.079 subscription: 0012: "epggrab" subscribing to mux "11135V", weight: 4, adapter: "#2", network: "DVB", service: "Raw PID Subscription" 2017-01-09 19:16:31.079 mpegts: 12647V in DVB - tuning on #1 2017-01-09 19:16:31.236 subscription: 0013: "epggrab" subscribing to mux "12647V", weight: 4, adapter: "#1", network: "DVB", service: "Raw PID Subscription" 2017-01-09 19:16:31.272 subscription: 000E: service instance is bad, reason: No input detected 2017-01-09 19:16:31.272 mpegts: 12524H in DVB - tuning on #1 2017-01-09 19:16:31.272 subscription: 0013: "epggrab" unsubscribing 2017-01-09 19:16:31.390 subscription: 000E: "94.xxx.xxx.8 [ saen | Kodi Media Center ]" subscribing on channel "bTV", weight: 150, adapter: "#1", network: "DVB", mux: "12524H", provider: "BULSATCOM", service: "bTV", profile="htsp", hostname="94.xxx.xxx.8", username="saen", client="Kodi Media Center" 2017-01-09 19:16:32.167 linuxdvb: #2 - poll TIMEOUT 2017-01-09 19:16:32.242 mpegts: 12647V in DVB - tuning on #7 2017-01-09 19:16:32.334 subscription: 0015: "epggrab" subscribing to mux "12647V", weight: 4, adapter: "#7", network: "DVB", service: "Raw PID Subscription" 2017-01-09 19:16:32.421 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:16:32.491 linuxdvb: #2 - retune nodata 2017-01-09 19:16:32.788 linuxdvb: #1 - retune nodata 2017-01-09 19:16:33.540 linuxdvb: #7 - poll TIMEOUT 2017-01-09 19:16:33.730 linuxdvb: #7 - retune nodata 2017-01-09 19:16:34.091 linuxdvb: #5 - poll TIMEOUT 2017-01-09 19:16:34.114 linuxdvb: #6 - poll TIMEOUT 2017-01-09 19:16:34.119 linuxdvb: #3 - poll TIMEOUT 2017-01-09 19:16:34.125 linuxdvb: #4 - poll TIMEOUT 2017-01-09 19:16:34.678 linuxdvb: #5 - retune nodata 2017-01-09 19:16:34.731 linuxdvb: #6 - retune nodata 2017-01-09 19:16:35.013 linuxdvb: #4 - retune nodata 2017-01-09 19:16:35.091 linuxdvb: #3 - retune nodata 2017-01-09 19:16:35.211 linuxdvb: #0 - poll TIMEOUT 2017-01-09 19:16:36.034 linuxdvb: #0 - retune nodata 2017-01-09 19:16:36.237 mpegts: 11012V in DVB - scan no data, failed 2017-01-09 19:16:36.237 subscription: 0010: "scan" unsubscribing 2017-01-09 19:16:36.757 subscription: 000E: "94.xxx.xxx.8 [ saen | Kodi Media Center ]" unsubscribing from "bTV", hostname="94.xxx.xxx.8", username="saen", client="Kodi Media Center" 2017-01-09 19:16:36.771 mpegts: 12524H in DVB - tuning on #1 2017-01-09 19:16:36.828 subscription: 0017: "94.xxx.xxx.8 [ saen | Kodi Media Center ]" subscribing on channel "NOVA", weight: 150, adapter: "#1", network: "DVB", mux: "12524H", provider: "BULSATCOM", service: "NOVA", profile="htsp", hostname="94.xxx.xxx.8", username="saen", client="Kodi Media Center" 2017-01-09 19:16:37.757 mpegts: 11012V in DVB - tuning on #0 2017-01-09 19:16:37.829 subscription: 0018: "epggrab" subscribing to mux "11012V", weight: 4, adapter: "#0", network: "DVB", service: "Raw PID Subscription" 2017-01-09 19:16:37.884 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:16:38.192 linuxdvb: #1 - retune nodata 2017-01-09 19:16:38.892 linuxdvb: #0 - poll TIMEOUT 2017-01-09 19:16:39.129 linuxdvb: #0 - retune nodata 2017-01-09 19:16:39.786 mpegts: 12565H in DVB - scan timed out (26/5 tables) 2017-01-09 19:16:39.828 linuxdvb: #2 - poll TIMEOUT 2017-01-09 19:16:40.550 linuxdvb: #2 - retune nodata 2017-01-09 19:16:41.200 linuxdvb: #7 - poll TIMEOUT 2017-01-09 19:16:41.751 linuxdvb: #5 - poll TIMEOUT 2017-01-09 19:16:41.758 linuxdvb: #5 - retune nodata 2017-01-09 19:16:41.774 linuxdvb: #6 - poll TIMEOUT 2017-01-09 19:16:41.779 linuxdvb: #3 - poll TIMEOUT 2017-01-09 19:16:41.786 linuxdvb: #4 - poll TIMEOUT 2017-01-09 19:16:42.026 linuxdvb: #6 - retune nodata 2017-01-09 19:16:42.078 linuxdvb: #7 - retune nodata 2017-01-09 19:16:42.283 linuxdvb: #4 - retune nodata 2017-01-09 19:16:42.309 linuxdvb: #3 - retune nodata 2017-01-09 19:16:45.544 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:16:46.529 linuxdvb: #1 - retune nodata 2017-01-09 19:16:46.552 linuxdvb: #0 - poll TIMEOUT 2017-01-09 19:16:47.218 linuxdvb: #0 - retune nodata 2017-01-09 19:16:47.488 linuxdvb: #2 - poll TIMEOUT 2017-01-09 19:16:47.709 linuxdvb: #2 - retune nodata 2017-01-09 19:16:47.847 subscription: 0017: service instance is bad, reason: No input detected 2017-01-09 19:16:47.847 mpegts: 12524H in DVB - tuning on #0 2017-01-09 19:16:47.847 subscription: 0018: "epggrab" unsubscribing 2017-01-09 19:16:47.958 subscription: 0017: "94.xxx.xxx.8 [ saen | Kodi Media Center ]" subscribing on channel "NOVA", weight: 150, adapter: "#0", network: "DVB", mux: "12524H", provider: "BULSATCOM", service: "NOVA", profile="htsp", hostname="94.xxx.xxx.8", username="saen", client="Kodi Media Center" 2017-01-09 19:16:48.847 mpegts: 11012V in DVB - tuning on #1 2017-01-09 19:16:48.860 linuxdvb: #7 - poll TIMEOUT 2017-01-09 19:16:48.913 subscription: 001A: "epggrab" subscribing to mux "11012V", weight: 4, adapter: "#1", network: "DVB", service: "Raw PID Subscription" 2017-01-09 19:16:48.987 linuxdvb: #0 - poll TIMEOUT 2017-01-09 19:16:49.184 linuxdvb: #7 - retune nodata 2017-01-09 19:16:49.236 linuxdvb: #0 - retune nodata 2017-01-09 19:16:49.411 linuxdvb: #5 - poll TIMEOUT 2017-01-09 19:16:49.434 linuxdvb: #6 - poll TIMEOUT 2017-01-09 19:16:49.439 linuxdvb: #3 - poll TIMEOUT 2017-01-09 19:16:49.446 linuxdvb: #4 - poll TIMEOUT 2017-01-09 19:16:49.490 linuxdvb: #4 - retune nodata 2017-01-09 19:16:49.721 epggrab: Bulsatcom: Bula 39E - data completion timeout for 12606H in DVB 2017-01-09 19:16:49.721 epggrab: EIT: DVB Grabber - data completion timeout for 12606H in DVB 2017-01-09 19:16:49.721 subscription: 0003: "epggrab" unsubscribing 2017-01-09 19:16:49.721 epggrab: EIT: DVB Grabber - data completion timeout for 12565H in DVB 2017-01-09 19:16:49.721 epggrab: Bulsatcom: Bula 39E - data completion timeout for 12565H in DVB 2017-01-09 19:16:49.721 subscription: 0002: "epggrab" unsubscribing 2017-01-09 19:16:49.821 epggrab: Bulsatcom: Bula 39E - data completion timeout for 12688H in DVB 2017-01-09 19:16:49.821 epggrab: EIT: DVB Grabber - data completion timeout for 12688H in DVB 2017-01-09 19:16:49.821 subscription: 0005: "epggrab" unsubscribing 2017-01-09 19:16:49.822 epggrab: Bulsatcom: Bula 39E - data completion timeout for 12647H in DVB 2017-01-09 19:16:49.822 epggrab: EIT: DVB Grabber - data completion timeout for 12647H in DVB 2017-01-09 19:16:49.822 subscription: 0004: "epggrab" unsubscribing 2017-01-09 19:16:49.987 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:16:50.210 linuxdvb: #1 - retune nodata 2017-01-09 19:16:50.821 mpegts: 12729V in DVB - tuning on #6 2017-01-09 19:16:50.898 subscription: 001C: "epggrab" subscribing to mux "12729V", weight: 4, adapter: "#6", network: "DVB", service: "Raw PID Subscription" 2017-01-09 19:16:51.939 linuxdvb: #6 - poll TIMEOUT 2017-01-09 19:16:52.186 linuxdvb: #6 - retune nodata 2017-01-09 19:16:55.149 linuxdvb: #2 - poll TIMEOUT 2017-01-09 19:16:55.759 linuxdvb: #2 - retune nodata 2017-01-09 19:16:56.520 linuxdvb: #7 - poll TIMEOUT 2017-01-09 19:16:56.647 linuxdvb: #0 - poll TIMEOUT 2017-01-09 19:16:57.372 linuxdvb: #7 - retune nodata 2017-01-09 19:16:57.421 linuxdvb: #0 - retune nodata 2017-01-09 19:16:57.646 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:16:58.343 linuxdvb: #1 - retune nodata 2017-01-09 19:16:58.861 subscription: 0017: service instance is bad, reason: No input detected 2017-01-09 19:16:58.862 mpegts: 12524H in DVB - tuning on #5 2017-01-09 19:16:58.908 subscription: 0017: "94.xxx.xxx.8 [ saen | Kodi Media Center ]" subscribing on channel "NOVA", weight: 150, adapter: "#5", network: "DVB", mux: "12524H", provider: "BULSATCOM", service: "NOVA", profile="htsp", hostname="94.xxx.xxx.8", username="saen", client="Kodi Media Center" 2017-01-09 19:16:59.599 linuxdvb: #6 - poll TIMEOUT 2017-01-09 19:16:59.967 linuxdvb: #5 - poll TIMEOUT 2017-01-09 19:17:00.206 linuxdvb: #5 - retune nodata 2017-01-09 19:17:00.284 linuxdvb: #6 - retune nodata 2017-01-09 19:17:02.809 linuxdvb: #2 - poll TIMEOUT 2017-01-09 19:17:02.830 linuxdvb: #2 - retune nodata 2017-01-09 19:17:04.180 linuxdvb: #7 - poll TIMEOUT 2017-01-09 19:17:04.499 linuxdvb: #7 - retune nodata 2017-01-09 19:17:05.307 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:17:05.439 linuxdvb: #1 - retune nodata 2017-01-09 19:17:07.259 linuxdvb: #6 - poll TIMEOUT 2017-01-09 19:17:07.366 linuxdvb: #6 - retune nodata 2017-01-09 19:17:07.627 linuxdvb: #5 - poll TIMEOUT 2017-01-09 19:17:08.311 linuxdvb: #5 - retune nodata 2017-01-09 19:17:08.960 subscription: 0017: service instance is bad, reason: No input detected 2017-01-09 19:17:08.961 mpegts: 12524H in DVB - tuning on #4 2017-01-09 19:17:09.027 subscription: 0017: "94.xxx.xxx.8 [ saen | Kodi Media Center ]" subscribing on channel "NOVA", weight: 150, adapter: "#4", network: "DVB", mux: "12524H", provider: "BULSATCOM", service: "NOVA", profile="htsp", hostname="94.xxx.xxx.8", username="saen", client="Kodi Media Center" 2017-01-09 19:17:10.054 linuxdvb: #4 - poll TIMEOUT 2017-01-09 19:17:10.283 linuxdvb: #4 - retune nodata 2017-01-09 19:17:10.469 linuxdvb: #2 - poll TIMEOUT 2017-01-09 19:17:10.886 linuxdvb: #2 - retune nodata 2017-01-09 19:17:11.079 subscription: 0012: "epggrab" unsubscribing 2017-01-09 19:17:11.840 linuxdvb: #7 - poll TIMEOUT 2017-01-09 19:17:12.243 subscription: 0015: "epggrab" unsubscribing 2017-01-09 19:17:12.967 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:17:13.523 linuxdvb: #1 - retune nodata Loglevel debug: enabled 2017-01-09 19:17:14.919 linuxdvb: #6 - poll TIMEOUT 2017-01-09 19:17:15.467 linuxdvb: #6 - retune nodata 2017-01-09 19:17:17.714 linuxdvb: #4 - poll TIMEOUT 2017-01-09 19:17:18.365 linuxdvb: #4 - retune nodata 2017-01-09 19:17:20.243 subscription: 0017: service instance is bad, reason: No input detected 2017-01-09 19:17:20.244 mpegts: 12524H in DVB - tuning on #3 2017-01-09 19:17:20.290 subscription: 0017: "94.xxx.xxx.8 [ saen | Kodi Media Center ]" subscribing on channel "NOVA", weight: 150, adapter: "#3", network: "DVB", mux: "12524H", provider: "BULSATCOM", service: "NOVA", profile="htsp", hostname="94.xxx.xxx.8", username="saen", client="Kodi Media Center" 2017-01-09 19:17:20.627 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:17:20.636 linuxdvb: #1 - retune nodata 2017-01-09 19:17:21.335 linuxdvb: #3 - poll TIMEOUT 2017-01-09 19:17:21.606 linuxdvb: #3 - retune nodata 2017-01-09 19:17:22.580 linuxdvb: #6 - poll TIMEOUT 2017-01-09 19:17:23.052 subscription: 0017: "94.xxx.xxx.8 [ saen | Kodi Media Center ]" unsubscribing from "NOVA", hostname="94.xxx.xxx.8", username="saen", client="Kodi Media Center" 2017-01-09 19:17:23.543 linuxdvb: #6 - retune nodata 2017-01-09 19:17:24.044 mpegts: 12524H in DVB - tuning on #7 2017-01-09 19:17:24.109 subscription: 001D: "epggrab" subscribing to mux "12524H", weight: 4, adapter: "#7", network: "DVB", service: "Raw PID Subscription" 2017-01-09 19:17:25.193 linuxdvb: #7 - poll TIMEOUT 2017-01-09 19:17:25.458 linuxdvb: #7 - retune nodata 2017-01-09 19:17:28.287 linuxdvb: #1 - poll TIMEOUT 2017-01-09 19:17:28.774 linuxdvb: #1 - retune nodata 2017-01-09 19:17:28.904 subscription: 001A: "epggrab" unsubscribing 2017-01-09 19:17:30.240 linuxdvb: #6 - poll TIMEOUT 2017-01-09 19:17:30.615 linuxdvb: #6 - retune nodata 2017-01-09 19:17:30.861 subscription: 001C: "epggrab" unsubscribing 2017-01-09 19:17:32.854 linuxdvb: #7 - poll TIMEOUT 2017-01-09 19:17:33.491 linuxdvb: #7 - retune nodata
signal stable no data received
Configure arguments:
--build=x86_64-linux-gnu --prefix=/usr --includedir=${prefix}/include --mandir=${prefix}/share/man --infodir=${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --libexecdir=${prefix}/lib/tvheadend --disable-maintainer-mode --disable-dependency-tracking
Compiler:
Using C compiler: cc
Using LD flags: -ldvben50221 -ldvbapi -lucsi
Build for arch: x86_64
Binaries:
Using PYTHON: python
Using GZIP: gzip
Using BZIP2: bzip2
Options:
pie yes
ccdebug no
cwc yes
capmt yes
constcw yes
linuxdvb yes
satip_server yes
satip_client yes
hdhomerun_client yes
hdhomerun_static yes
iptv yes
tsfile yes
dvbscan yes
timeshift yes
trace yes
imagecache yes
avahi yes
zlib yes
libav yes
ffmpeg_static yes
libx264 yes
libx264_static yes
libx265 yes
libx265_static yes
libvpx yes
libvpx_static yes
libtheora yes
libtheora_static yes
libvorbis yes
libvorbis_static yes
libfdkaac yes
libfdkaac_static yes
nvenc no
qsv no
libmfx_static no
inotify yes
epoll yes
uriparser yes
ccache no
tvhcsa yes
bundle no
dvbcsa no
dvben50221 yes
kqueue no
dbus_1 yes
android no
tsdebug no
gtimer_check yes
slow_memoryinfo no
libsystemd_daemon no
bintray_cache yes
execinfo yes
mmx yes
sse2 yes
W_unused_result yes
getloadavg yes
atomic64 yes
atomic_time_t yes
bitops64 yes
lockowner yes
qsort_r yes
stime yes
gmtoff yes
recvmmsg yes
sendmmsg yes
libdvben50221 yes
ifnames yes
py_gzip yes
bin_pkg_config yes
bin_xgettext yes
bin_msgmerge yes
bin_gzip yes
bin_bzip2 yes
ssl yes
linuxdvbapi yes
upnp yes
bin_cmake yes
stdcpp yes
libogg_static yes
inotify_h yes
linuxdvb_ca yes
mpegts yes
mpegts_dvb yes
Packages:
openssl 1.0.1f
zlib 1.2.8
liburiparser 0.7.5
avahi-client 0.6.31
dbus-1 1.6.18
Installation paths:
Prefix: /usr
Binaries: ${prefix}/bin
Libraries: ${prefix}/lib
Data files: ${prefix}/share
Man pages: /usr/share/man
Updated by Rainer Dorsch almost 8 years ago
I see a signal strength of -26.1 dB and a SNR of 10 dB. Numbers change though if I change the channel, e.g. another one has -30.8 dB/12.6 dB or even if I switch back to the original channel.
The numbers are from the status->stream tab.
I see pretty consistent breaks, e.g. I recorded 3 days in a row all recording broke up after about 400 MB. If it would be depended on a signal issue, I would expect impact of the weather and a more random behavior. But I am just speculating here...
Updated by Jan Schröter over 7 years ago
Updated by I often get "mpegts: too much queued table input data (over 2MB), discarding new" warnings during the epggrab.
I had the exactly same problems for a long time. During several months i changed several things like for example went from direct attached TBS6205 to Tvheadend as an SAT>IP client of minisatip. In all these constellations watching tv worked fine, parallel recording of several streams an zapping worked fine. But when the epg grabber (ota) started it was a matter of time, when this error occures. Same symptoms - no more webinterface, no more reactions on SIGTERM - only SIGKILL works.
I was running epg grabber every 30 Minutes (*/30 * * * *) and had set a timeout of 300 seconds. All 4 tuners where activated for OTA grabber. With this settings it was a question of hours until when the error occurs.
Now my tvheadend Server is running stable for days an shows not a single sign of changing this. I hadn't changed my usage profile, but epg grabber settings as following:
- default grabber times (4 2 * * * / 4 14 * * *)
- 30 seconds timeout
- only one tuner activated for ota grabbing
This brings me to the question if the problems could maybe lie in some kind of race condition or blocking in epg-grabber itself?
Updated by Jaroslav Kysela over 7 years ago
Jan Schröter wrote:
I often get "mpegts: too much queued table input data (over 2MB), discarding new" warnings during the epggrab.
I had the exactly same problems for a long time. During several months i changed several things like for example went from direct attached TBS6205 to Tvheadend as an SAT>IP client of minisatip. In all these constellations watching tv worked fine, parallel recording of several streams an zapping worked fine. But when the epg grabber (ota) started it was a matter of time, when this error occures. Same symptoms - no more webinterface, no more reactions on SIGTERM - only SIGKILL works.
If you have TVH in this condition, you should provide the full backtrace - https://tvheadend.org/projects/tvheadend/wiki/Debugging - to analyze, if there are some mutex issues.
Updated by Jan Steffens about 7 years ago
Updated by Jaroslav Kysela wrote:
Hmm.. It seems that linux dvbapi ioctls are too costly (time) on your hardware:
[...]
Which hardware / driver do you use?
Basically, this callback checks for the tuner status and collects the statistics (signal, lost packets in the demodulator, etc.). It should be done in few milliseconds. In your case, the callback takes ~1.3 second and it blocks all other parts in tvheadend which runs with the global lock. It means that the vital parts of tvheadend are blocked.
I think that the driver is wrong.
I have four DigitalDevices tuners here (2 * STV090x and 2 * STV0910, with the drivers from https://github.com/DigitalDevices/dddvb), and each linuxdvb_frontend_monitor takes between 60ms and 200ms (180ms is typical). While the OTA grabber runs, Tvheadend is unresponsive.
Updated by holli 73 about 7 years ago
Updated by hello,
since the latest pull i have the same as well running on a xeon cpu with 3,7ghz and 65gb ram - it was fine before but now i get:
017-09-04 22:08:24.317 mpegts: too much queued input data (over 50MB), discarding new 2017-09-04 22:08:34.406 mpegts: too much queued input data (over 50MB), discarding new 2017-09-04 22:08:36.542 TS: DVB-S Network/12382.5H/Eurosport 1 HD: AC3 @ #515 Continuity counter error (total 1) 2017-09-04 22:08:36.553 TS: DVB-S Network/12382.5H/Eurosport 1 HD: H264 @ #511 Continuity counter error (total 1) 2017-09-04 22:08:36.587 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:36.587 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:36.587 libav: AVCodecContext: number of reference frames (0+5) exceeds max (4; probably corrupt input), discarding one 2017-09-04 22:08:36.654 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:36.656 libav: AVCodecContext: reference picture missing during reorder 2017-09-04 22:08:36.656 libav: AVCodecContext: reference picture missing during reorder 2017-09-04 22:08:36.656 libav: AVCodecContext: Missing reference picture, default is 2147483647 2017-09-04 22:08:36.656 libav: AVCodecContext: Missing reference picture, default is 2147483647 2017-09-04 22:08:36.668 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:36.668 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:36.668 libav: AVCodecContext: number of reference frames (0+5) exceeds max (4; probably corrupt input), discarding one 2017-09-04 22:08:36.932 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:36.932 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:36.932 libav: AVCodecContext: number of reference frames (0+5) exceeds max (4; probably corrupt input), discarding one 2017-09-04 22:08:36.973 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:36.973 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:36.973 libav: AVCodecContext: number of reference frames (0+5) exceeds max (4; probably corrupt input), discarding one 2017-09-04 22:08:37.578 libav: AVCodecContext: reference picture missing during reorder 2017-09-04 22:08:37.578 libav: AVCodecContext: reference picture missing during reorder 2017-09-04 22:08:37.578 libav: AVCodecContext: Missing reference picture, default is 70096 2017-09-04 22:08:37.578 libav: AVCodecContext: Missing reference picture, default is 70096 2017-09-04 22:08:37.586 libav: AVCodecContext: reference picture missing during reorder 2017-09-04 22:08:37.586 libav: AVCodecContext: reference picture missing during reorder 2017-09-04 22:08:37.586 libav: AVCodecContext: Missing reference picture, default is 70095 2017-09-04 22:08:37.586 libav: AVCodecContext: Missing reference picture, default is 70095 2017-09-04 22:08:37.733 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:37.738 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:37.738 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:37.738 libav: AVCodecContext: number of reference frames (0+5) exceeds max (4; probably corrupt input), discarding one 2017-09-04 22:08:38.152 libav: AVCodecContext: reference picture missing during reorder 2017-09-04 22:08:38.152 libav: AVCodecContext: reference picture missing during reorder 2017-09-04 22:08:38.152 libav: AVCodecContext: Missing reference picture, default is 70112 2017-09-04 22:08:38.152 libav: AVCodecContext: Missing reference picture, default is 70112 2017-09-04 22:08:38.161 libav: AVCodecContext: reference picture missing during reorder 2017-09-04 22:08:38.161 libav: AVCodecContext: reference picture missing during reorder 2017-09-04 22:08:38.161 libav: AVCodecContext: Missing reference picture, default is 70111 2017-09-04 22:08:38.161 libav: AVCodecContext: Missing reference picture, default is 70111 2017-09-04 22:08:38.742 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:38.742 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:08:38.742 libav: AVCodecContext: number of reference frames (0+5) exceeds max (4; probably corrupt input), discarding one 2017-09-04 22:08:41.796 tsfix: transport stream AC3, DTS discontinuity. DTS = 8363520, last = 8136000 2017-09-04 22:08:41.796 transcode: 0002: 02:VORBIS: [ac3 => vorbis]: Detected framedrop in audio (8138880 != 8363520) 2017-09-04 22:08:44.536 mpegts: too much queued input data (over 50MB), discarding new 2017-09-04 22:08:54.564 mpegts: too much queued input data (over 50MB), discarding new 2017-09-04 22:09:01.897 TS: DVB-S Network/12382.5H/Eurosport 1 HD: H264 @ #511 Continuity counter error (total 8) 2017-09-04 22:09:01.897 TS: DVB-S Network/12382.5H/Eurosport 1 HD: AC3 @ #515 Continuity counter error (total 8) 2017-09-04 22:09:01.897 TS: DVB-S Network/12382.5H/Eurosport 1 HD: H264 @ #511: Invalid start code f7:dd:70 2017-09-04 22:09:01.898 TS: DVB-S Network/12382.5H/Eurosport 1 HD: AC3 @ #515: Invalid start code fe:9c:e6 2017-09-04 22:09:02.197 tsfix: transport stream H264, DTS discontinuity. DTS = 10332720, last = 9276120 2017-09-04 22:09:02.202 libav: AVCodecContext: mmco: unref short failure 2017-09-04 22:09:02.202 libav: AVCodecContext: mmco: unref short failure
thanks
holli
Updated by holli 73 about 7 years ago
holli 73 wrote:
hello,
since the latest pull i have the same as well running on a xeon cpu with 3,7ghz and 65gb ram - it was fine before but now i get:
[...]
thanks
holli
if i use tvh app on the iphone this works fine - the stream is not interrupted and tvh is only using apx 3% cpu!
if i use the web browser tvh is running at 100% cpu and video is only playing for 2 seconds...
Updated by Jaroslav Kysela about 7 years ago
It seems that software VP8 encoder hangs tvh. It's new bug not related to the original report. We should tune more the default settings for VP8.
Updated by Anders Thomson about 7 years ago
Updated by 
Bobby Lockwood wrote:
I often get "mpegts: too much queued table input data (over 2MB), discarding new" warnings during the epggrab.
For example this morning they started at 02:04 when the cron job started and kept going until I rebooted the box at 06:00.
When they occur I am unable to access the webinterface and recordings don't take place.
I'm running TVH on a Wetek Play with Libreelec 7.02
EIT: DVB Grabber and UK: Freesat OTA grabbers.
A logfile is attached.
Hi, I can add a data point here. I had never seen this message before. Three days ago I upgraded from 4.2.1 to 4.2.3, and this morning it was there. Nothing else changed on the system (rpi2, with two tuners). Hopefully that can narrow it down a bit.
Updated by Anders Thomson about 7 years ago
Hmm, slight addendum to that. Nothing has changed in terms of hw/sw, however I do have about twice as many channels now as I had before the upgrade. The decryption of the channels were acting up and I did the upgrade in an attempt to get it fixed. Not sure that was the cure, but now it works, anyway.
It wanted, I could try to downgrade to 4.2.1 and see if the message will reappear (pointing at the volume of dvb-t/t2 channels)
Updated by Jaroslav Kysela almost 7 years ago
- Status changed from New to Rejected
- Parent task set to #4851
Closing as dup of #4851 .