Project

General

Profile

Bug #3821

Input Output error when using SAT/IP Server Octopus .NET

Added by A Ba over 8 years ago. Updated over 8 years ago.

Status:
Fixed
Priority:
Normal
Assignee:
-
Category:
SAT>IP
Target version:
-
Start date:
2016-05-24
Due date:
% Done:

100%

Estimated time:
Found in version:
4.1-2052
Affected Versions:

Description

I already asked in the Forum - as nobody replied I assume this is a bug and not a misconfig.
SAT/IP Server is from Digital Devices. Octopus.Net with DVB-C Tuner Cards. Attached is the detailed output (Read-Only Info)
As soon as I tune on a channel I get an Input/Output error (I attached the screenshot)

When I use the RecordingService (SAT/IP Server from DVBViewer) it works although this Server uses the Octopus as Input. So there's something wrong with the Interface TVHEadend - Octopus.

I'm using TVHeadend: HTS Tvheadend 4.1-2052~g6b9dcab~jessie (But had the same issue with the Stable release)

Thanks

Alex


Files

01_Octopus_Tuning fails.png (235 KB) 01_Octopus_Tuning fails.png A Ba, 2016-05-24 16:05
02_DVB_SATIP _server_Tuning_Works.png (153 KB) 02_DVB_SATIP _server_Tuning_Works.png A Ba, 2016-05-24 16:05
hc_003.png (152 KB) hc_003.png A Ba, 2016-05-24 16:05
hc_004.png (156 KB) hc_004.png A Ba, 2016-05-24 16:05
hc_005.png (133 KB) hc_005.png A Ba, 2016-05-24 18:34
tvheadend.log (10.9 KB) tvheadend.log A Ba, 2016-05-24 18:34
tvheadend.log (13.8 KB) tvheadend.log A Ba, 2016-05-24 19:04
hc_006.png (138 KB) hc_006.png A Ba, 2016-05-24 19:50

History

#1

Updated by Jaroslav Kysela over 8 years ago

Provide '--trace satip,httpc' log - https://tvheadend.org/projects/tvheadend/wiki/Traces . Error 400 means 'bad request' so the octopus does not understand the request (command) from TVH.

#2

Updated by A Ba over 8 years ago

Hi,

thanks for the quick response. I hope I understood that right (I'm quite new to Linux). Attached is the Screenshot what I prepared in the Debug section. Then I applied and switched to the Channel. Attached is the Logfile I got.

Thanks

#3

Updated by Jaroslav Kysela over 8 years ago

Unfortunately, if you set trace through webui, this settings is lost on next restart. I see [TRACE] lines before you restarted tvh in your log file.

#4

Updated by A Ba over 8 years ago

Hi sorry my fault. I activated and did again (Without a restart ). Now you should have it

Thanks :-)

Alex

#5

Updated by Jaroslav Kysela over 8 years ago

Could you try to force the modulation in the mux settings ?

#6

Updated by A Ba over 8 years ago

Hi,

yes after setting the QAM/64 it worked. XSee screenshot attached. Great :-)
I just wonder why it's working with the Recording Service SAT/IP Server with Auto modulation?

Thanks a lot

Alex

#7

Updated by Jaroslav Kysela over 8 years ago

  • Status changed from New to Fixed
  • % Done changed from 0 to 100

Applied in changeset commit:tvheadend|afae0496717b330a8e72771d95b0541c8c72cccb.

Also available in: Atom PDF