Tvheadend

hackbird hackbird wrote:

Hello,

at the moment i am using HTS Tvheadend 4.1.1931 ~ LibreELEC Tvh-addon v7.0.101.

Before i am using HTS Tvheadend 4.1.1943.

Now my problems:

HTS Tvheadend 4.1.1931 (actually build i use):

+ scanning on cable (KabelBW) works ok and all channels will be find
- Picons with 1_0_1... will not show (the version before no problem)

Set "Picon name scheme:" to "Force service type to 1" in Configuration -> General -> Base -> Picon.

Then go back to Configuration -> Channel/EPG -> Channels, select all channels (use the pager at the bottom of the screen and select "all" from the drop down), then press "Reset Icon".

Note: to select all channels click the first channel in the grid, then scroll to the bottom and while holding shift click on the last channel.

HTS Tvheadend 4.1.1943 (newest Version on LibreElec)

- scanning on cable (KabelBW) wont work. My DVB-C stick are showing but wont scan.
I am using TechnoTrend TT-TVStick CT2-4400 USB-TV-Karte

This was my log of the 4.1.1943 which wont work scanning:

2016-04-23 14:53:41.745 [ INFO] main: Log started
2016-04-23 14:53:41.748 [ INFO] http: Starting HTTP server 0.0.0.0:9981
2016-04-23 14:53:41.748 [ INFO] htsp: Starting HTSP server 0.0.0.0:9982
2016-04-23 14:53:42.286 [ INFO] config: loaded
2016-04-23 14:53:42.289 [ INFO] config: scanfile (re)initialization with path <none>
2016-04-23 14:53:42.714 [ INFO] scanfile: DVB-S - loaded 1 regions with 113 networks
2016-04-23 14:53:42.715 [ INFO] scanfile: DVB-T - loaded 39 regions with 1014 networks
2016-04-23 14:53:42.715 [ INFO] scanfile: DVB-C - loaded 17 regions with 54 networks
2016-04-23 14:53:42.716 [ INFO] scanfile: ATSC-T - loaded 2 regions with 9 networks
2016-04-23 14:53:42.716 [ INFO] scanfile: ATSC-C - loaded 1 regions with 5 networks
2016-04-23 14:53:42.716 [ INFO] scanfile: ISDB-T - loaded 2 regions with 1000 networks
2016-04-23 14:53:44.600 [ INFO] linuxdvb: adapter added /dev/dvb/adapter0
2016-04-23 14:53:44.600 [ INFO] linuxdvb: adapter 0 setting exlusive flag
2016-04-23 14:53:44.601 [ INFO] dvr: Creating new configuration ''
2016-04-23 14:53:44.602 [ INFO] descrambler: adding CAID 0963 as quick ECM (Sky UK)
2016-04-23 14:53:44.602 [ INFO] descrambler: adding CAID 098C as quick ECM (Sky DE)
2016-04-23 14:53:44.602 [ INFO] descrambler: adding CAID 09C4 as quick ECM (Sky DE)
2016-04-23 14:53:44.602 [ INFO] descrambler: adding CAID 09CD as quick ECM (Sky IT)
2016-04-23 14:53:44.602 [ INFO] descrambler: adding CAID 2600 as constant crypto-word (BISS)
2016-04-23 14:53:44.602 [ INFO] epggrab: module eit created
2016-04-23 14:53:44.602 [ INFO] epggrab: module uk_freesat created
2016-04-23 14:53:44.602 [ INFO] epggrab: module uk_freeview created
2016-04-23 14:53:44.602 [ INFO] epggrab: module viasat_baltic created
2016-04-23 14:53:44.602 [ INFO] epggrab: module Bulsatcom_39E created
2016-04-23 14:53:44.602 [ INFO] epggrab: module psip created
2016-04-23 14:53:44.608 [ INFO] epggrab: module opentv-ausat created
2016-04-23 14:53:44.613 [ INFO] epggrab: module opentv-skynz created
2016-04-23 14:53:44.613 [ INFO] epggrab: module opentv-skyuk created
2016-04-23 14:53:44.613 [ INFO] epggrab: module opentv-skyit created
2016-04-23 14:53:44.615 [ INFO] epggrab: module pyepg created
2016-04-23 14:53:44.615 [ INFO] epggrab: module xmltv created
2016-04-23 14:53:44.633 [ INFO] spawn: Executing "/storage/.kodi/addons/service.tvheadend42/bin/tv_grab_file"
2016-04-23 14:53:44.724 [ INFO] epgdb: gzip format detected, inflating (ratio 72.3%)
2016-04-23 14:53:44.725 [ INFO] epgdb: loaded v2
2016-04-23 14:53:44.725 [ INFO] epgdb: config 1
2016-04-23 14:53:44.725 [ INFO] epgdb: channels 0
2016-04-23 14:53:44.725 [ INFO] epgdb: brands 0
2016-04-23 14:53:44.725 [ INFO] epgdb: seasons 0
2016-04-23 14:53:44.725 [ INFO] epgdb: episodes 0
2016-04-23 14:53:44.725 [ INFO] epgdb: broadcasts 0
2016-04-23 14:53:44.725 [ NOTICE] START: HTS Tvheadend version 4.1.1928 ~ LibreELEC Tvh-addon v7.0.101 started, running as PID:748 UID:0 GID:39, CWD:/ CNF:/storage/.kodi/userdata/addon_data/service.tvheadend42

Tvheadend can take up to 5-10 mins to begin scanning. You also must make sure that you've assigned the network to the (enabled) adapter.

Hope u can help me.

Ok, will test again.
I didnt wait up to 5-10 minutes.
In other version scanning begins after a few seconds.

With picons i did the same what u write, but nothing happens.

I will now test 4.1.1943 on weekend.

Write u then what happend with this version.

Thx for answering Mark

Hello,
same Problem over here.
Same USB-Stick other Provider (Unitymedia_de)

Kai Schmalenbach wrote:

Hello,
same Problem over here.
Same USB-Stick other Provider (Unitymedia_de)

The Stick you both have uses the same chipset as two of my devices, the Si21** and it works fine here for me receving DVB-T/T2.

If Tvheadend isn't scanning, it would suggest that you've not enabled the adapter and assigned it a network or there is something else.

If you open the Tvheadend log (click the bar at the bottom, use the up arrow to keep it there) and then try playing a mux in VLC (Copy and paste a play link next to a mux in Configuration -> DVB Inputs -> Muxes).

The output should then tell you what the problem is.

Mark Clarkstone wrote:

Kai Schmalenbach wrote:

Hello,
same Problem over here.
Same USB-Stick other Provider (Unitymedia_de)

The Stick you both have uses the same chipset as two of my devices, the Si21** and it works fine here for me receving DVB-T/T2.

If Tvheadend isn't scanning, it would suggest that you've not enabled the adapter and assigned it a network or there is something else.

If you open the Tvheadend log (click the bar at the bottom, use the up arrow to keep it there) and then try playing a mux in VLC (Copy and paste a play link next to a mux in Configuration -> DVB Inputs -> Muxes).

The output should then tell you what the problem is.

needless to say, TVheadend 4.0 works fine and is up and runnig at this point, Installation is not my first. Configfail ruled out.

Hey Mark,

thx for posting ur problems too. So i am not the lonesome Rider with this problem.

What system are u using`?

So install today latest TVH Version of libreelec 4.1.1943

Scanning works without any problems.

Only picons wont showing all or some are on wrong place.

And one other thing what dont work on the latest version is to show which canal are decrypt oder crypted.
Only showing "unknown".
Before on Version TVH 4.0 was showing for example "Nagravision" .....

Jaroslav Kysela wrote:

CA info was unreliable (it never worked when multiple CAs were assigned to a service). So the current status is only - decrypted / FTA. The HTSP client code should be updated to show the used CA.

please look above, this ticket is not about CAs

Yep, but see comment #6 - with latest, the scanning is fine...