Bug #3115
closed
KNC ONE BDA -> DVB-S2 -> TVHeadend -> KODI installieren / Konfigurieren
Added by Hans Freiberger over 9 years ago.
Updated over 9 years ago.
Description
Hallo,
seit Tagen versuche ich mit TVHeadend die KNC ONE DVB-S2 zu scannen.
> Sender (Muxes / Services) werden gefunden ...
ABER: nur sehr wenige HD-Sender (WDR ... HD) werden gefunden
im Status wird beim Scannen die SNR mit 0% und die "Signal Strength" mit nicht mehr als 1% angezeigt.
Unverständlich, weil der Scan mit Kaffeine okay ist und auf der W7-Partition ebenso alle HD-Sender gefunden werden. Auch ist die Signal Strength bei ca 80%.
Mit Klick auf den Play-Link kann ein (leider nicht HD) Sender angezeigt werden.
Was muss vor der Installation / Konfiguration von TVHeadend getan werden, um alle Sender scannen zu können?
Muss KODI vor TVHeadend oder später installiert werden?
Ich würde gern auch mit KODI gemeinsam mit Live-TV auf Ubuntu 15.04 umsteigen.
Danke für Hinweise
Note: I used Google translate to read this ticket hopefully it translated it correctly
You can install & configure Tvheadend before setting up Kodi for use with Tvheadend but really it doesn't matter as you can import channels in Kodi/pvr.hts later anyway.
If I've read this correctly this doesn't sound like a bug to me, these kind of questions are what the forum is for, please use that instead.
- Status changed from New to Rejected
Does work tvheadend with TBS-Hardware only? Whiche devices work with tvheadend. KNC ONE DVB-S2 does not.
Hans Freiberger wrote:
Does work tvheadend with TBS-Hardware only? Whiche devices work with tvheadend. KNC ONE DVB-S2 does not.
Tvheadend is not restricted to certain brands of hardware.
If there is a Linux driver for your device it will work fine in Tvheadend, if you're getting failed scans "Scan failed, no data" make sure that you're entering the correct frequency details. If that fails try your device on/in another machine/OS to rule out the hardware and signal.
Mark Clarkstone wrote:
Hans Freiberger wrote:
Does work tvheadend with TBS-Hardware only? Whiche devices work with tvheadend. KNC ONE DVB-S2 does not.
Tvheadend is not restricted to certain brands of hardware.
If there is a Linux driver for your device it will work fine in Tvheadend, if you're getting failed scans "Scan failed, no data" make sure that you're entering the correct frequency details. If that fails try your device on/in another machine/OS to rule out the hardware and signal.
Just had a read of this thread over at mediaportal. It appears there was a bug with the driver that has been fixed on Windows at least. From what I've read in that thread the driver expects all details to be correct so won't accept any AUTO values at all so try entering all frequency info into Tvheadend.
Also available in: Atom
PDF
Updated by 
Updated by 
Updated by