Tvheadend

I have been reading the sources and it seems the predefinitions are downloaded from linuxtv git servers or something similar.. i searched for the definitions and they are there, the only needed thing is to add the network type and point it to the file in the git definitions file... i tried doing the fix, but after touching 5 files i think its too much for me. Im not very experienced with complex code.

I am facing same issue. Argentina is not shown in the DVB-T list of muxes.

Would it be possible to have it added?

Thank you and regards.

not sure if its worth to open another request, but after creating the network, it does not show in the networks list of the adapter, if i change the network type to dvbt in the config file, it shows up, maybe a filtering problem while scanning for networks ?

thanks a lot
Juanjo

Could you retry with v4.1-1337-g6a92dac ?

now it shows up in the list, i select it but tuning gives error in the logs

2016-01-08 22:39:38.895 mpegts: 635.142MHz in TDA - tuning on DiBcom 8000 ISDB-T : ISDB-T #0
2016-01-08 22:39:38.895 linuxdvb: DiBcom 8000 ISDB-T : ISDB-T #0 - unknown FE type 6
2016-01-08 22:39:38.895 mpegts: 731.142MHz in TDA - tuning on DiBcom 8000 ISDB-T : ISDB-T #0
2016-01-08 22:39:38.895 linuxdvb: DiBcom 8000 ISDB-T : ISDB-T #0 - unknown FE type 6
2016-01-08 22:39:38.895 mpegts: 641.142MHz in TDA - tuning on DiBcom 8000 ISDB-T : ISDB-T #0
2016-01-08 22:39:38.895 linuxdvb: DiBcom 8000 ISDB-T : ISDB-T #0 - unknown FE type 6

Same problem for me (Brazil in my case). I've just created a ticket about this:

[[http://www.tvheadend.org/issues/3500]]

If I try to run this release with --trace linuxdvb, it freezes while starting and I have to kill it. The last lines on log before freezing are:

2016-01-15 14:43:17.142 [ INFO] config: loaded
2016-01-15 14:43:17.578 [ INFO] scanfile: DVB-T - loaded 44 regions with 1104 networks
2016-01-15 14:43:17.578 [ INFO] scanfile: DVB-S - loaded 1 regions with 92 networks
2016-01-15 14:43:17.578 [ INFO] scanfile: DVB-C - loaded 17 regions with 53 networks
2016-01-15 14:43:17.578 [ INFO] scanfile: ATSC-T - loaded 2 regions with 9 networks
2016-01-15 14:43:17.578 [ INFO] scanfile: ATSC-C - loaded 1 regions with 5 networks

Sorry... after rebooting I could start TVH with --trace linuxdvb.

This is what I got with --trace linuxdvb when trying to scan a ISDB mux:

2016-01-15 14:55:14.278 [ INFO]:mpegts: 641.142MHz in SBTV - tuning on DiBcom 8000 ISDB-T : ISDB-T #0
2016-01-15 14:55:14.278 [ DEBUG]:linuxdvb: DiBcom 8000 ISDB-T : ISDB-T #0 - starting 641.142MHz in SBTV
2016-01-15 14:55:14.278 [ TRACE]:linuxdvb: DiBcom 8000 ISDB-T : ISDB-T #0 - tuning
2016-01-15 14:55:14.278 [ TRACE]:linuxdvb: DiBcom 8000 ISDB-T : ISDB-T #0 - frontend clear
2016-01-15 14:55:14.278 [ TRACE]:linuxdvb: tuner DiBcom 8000 ISDB-T : ISDB-T #0 tunning to UNKNOWN MUX CONFIG (freq -1)
2016-01-15 14:55:14.278 [ ERROR]:linuxdvb: DiBcom 8000 ISDB-T : ISDB-T #0 - unknown FE type 6

I'm using a predefined mux (Brazil: br-sp-Araras).

Let me know if you need more info.

Renato Riolino wrote:

Same problem for me (Brazil in my case). I've just created a ticket about this:

[[http://www.tvheadend.org/issues/3500]]

If I try to run this release with --trace linuxdvb, it freezes while starting and I have to kill it. The last lines on log before freezing are:

2016-01-15 14:43:17.142 [ INFO] config: loaded
2016-01-15 14:43:17.578 [ INFO] scanfile: DVB-T - loaded 44 regions with 1104 networks
2016-01-15 14:43:17.578 [ INFO] scanfile: DVB-S - loaded 1 regions with 92 networks
2016-01-15 14:43:17.578 [ INFO] scanfile: DVB-C - loaded 17 regions with 53 networks
2016-01-15 14:43:17.578 [ INFO] scanfile: ATSC-T - loaded 2 regions with 9 networks
2016-01-15 14:43:17.578 [ INFO] scanfile: ATSC-C - loaded 1 regions with 5 networks

Hi Renato.

Which dongle are you using for ISDB-T?

Cheers