Tvheadend

I probably found which part of the code is "faulty". In tvheadend/src/input/mpegts/satip/satip.c, the following code should be added:

else if (strncmp(argv[i], "DVBC2-", 6) == 0) {
      type = DVB_TYPE_C;
      m = atoi(argv[i] + 6);
}

in order to catch DVBC2 tuners which are DVBC and DVBC2 compatible.

I've cloned the Tvheadend git, applied the pull request #597 (SAT>IP Server Implementation #597), compiled and launched tvheadend.

I get now the 4 tuners as expected (2x DVB-T and 2x DVB-C). After the creation of the "Cablecom" network under DVB > Network and the mapping of one of the DVB-C tuner to this network, Tvheadend is unable to start the scanning of the muxes. I've got the following error:

2015-03-20 21:07:58.007 [ INFO] mpegts: 426MHz in Cablecom - tuning on SAT>IP DVB-C Tuner #3 (10.92.40.207)
2015-03-20 21:07:58.007 [ INFO] subscription: 0042: "scan" subscribing on "none", weight: 2, adapter: "SAT>IP DVB-C Tuner #3 (10.92.40.207)", network: "Cablecom", mux: "426MHz", provider: "<N/A>", service: "Raw PID Subscription"
2015-03-20 21:07:58.011 [ ERROR] satip: SAT>IP DVB-C Tuner #3 (10.92.40.207) - RTSP SETUP error -5 (Input/output error) [5-404]
2015-03-20 21:08:03.004 [ INFO] mpegts: 426MHz in Cablecom - scan no data, failed
2015-03-20 21:08:03.004 [ INFO] subscription: 0042: "scan" unsubscribing

Does anyone can help ?

Thanks

I've found the reason:
https://tvheadend.org/boards/5/topics/11793?r=12887