Hi. Sorry for the inconvenience. That's all I got out and wondered myself if that would help or not. Since I'm not a C coder at all, I decided to upload what I have. Thank you for the link on how the log is supposed to look and also thanks on the tip on core. I suppose one with the proper access to those attached files could delete them since they useless.
As you've probably noticed, this is completely new territory to me. I can't seem to get any "[ALERT]:CRASH" messages logged. I have not disabled trace upon configure. This I got when running within gdb (I found this page https://tvheadend.org/projects/tvheadend/wiki/Tvheadendcrash):
this is what is printed out on out crash
tvheadend: src/plumbing/globalheaders.c:218: gh_hold: Assertion `gh->gh_ss == ((void *)0)' failed.
info reg
(gdb) info reg
r0 0x0 0
r1 0x167f 5759
r2 0x6 6
r3 0x167f 5759
r4 0x6 6
r5 0x41ca2bdc 1103768540
r6 0x41ca2000 1103765504
r7 0x10c 268
r8 0xbdc 3036
r9 0x460043a8 1174422440
r10 0x46004f30 1174425392
r11 0x460053f0 1174426608
r12 0x419a470c 1100629772
sp 0x46004308 0x46004308
lr 0x41b9fcd4 1102707924
pc 0x41b9fd08 0x41b9fd08 <raise+64>
fps 0x0 0
cpsr 0x20000010 536870928
disassemble
(gdb) disassemble $pc-32,$pc+32
Dump of assembler code for function raise:
0x41b9fcc8 <raise+0>: push {r4, r5, r7, lr}
0x41b9fccc <raise+4>: mov r4, r0
0x41b9fcd0 <raise+8>: bl 0x41b8a990
0x41b9fcd4 <raise+12>: ldr r3, [r0, #-1112] ; 0x458
0x41b9fcd8 <raise+16>: mov r2, r0
0x41b9fcdc <raise+20>: cmp r3, #0
0x41b9fce0 <raise+24>: ldr r0, [r0, #-1108] ; 0x454
0x41b9fce4 <raise+28>: bne 0x41b9fd18 <raise+80>
0x41b9fce8 <raise+32>: mov r7, #224 ; 0xe0
0x41b9fcec <raise+36>: svc 0x00000000
0x41b9fcf0 <raise+40>: mov r3, r0
0x41b9fcf4 <raise+44>: str r0, [r2, #-1112] ; 0x458
0x41b9fcf8 <raise+48>: mov r1, r3
0x41b9fcfc <raise+52>: mov r2, r4
0x41b9fd00 <raise+56>: mov r7, #268 ; 0x10c
0x41b9fd04 <raise+60>: svc 0x00000000
0x41b9fd08 <raise+64>: cmn r0, #4096 ; 0x1000
0x41b9fd0c <raise+68>: bhi 0x41b9fd34 <raise+108>
0x41b9fd10 <raise+72>: pop {r4, r5, r7, lr}
0x41b9fd14 <raise+76>: bx lr
0x41b9fd18 <raise+80>: cmp r0, #0
0x41b9fd1c <raise+84>: bgt 0x41b9fcf8 <raise+48>
0x41b9fd20 <raise+88>: bic r2, r0, #-2147483648 ; 0x80000000
0x41b9fd24 <raise+92>: cmp r2, #0
0x41b9fd28 <raise+96>: moveq r0, r3
0x41b9fd2c <raise+100>: rsbne r0, r0, #0
0x41b9fd30 <raise+104>: b 0x41b9fcf8 <raise+48>
0x41b9fd34 <raise+108>: ldr r1, [pc, #76] ; 0x41b9fd88 <raise+192>
0x41b9fd38 <raise+112>: rsb r5, r0, #0
0x41b9fd3c <raise+116>: ldr r1, [pc, r1]
0x41b9fd40 <raise+120>: bl 0x41b8a990
0x41b9fd44 <raise+124>: cmp r5, #38 ; 0x26
0x41b9fd48 <raise+128>: mov r2, r0
0x41b9fd4c <raise+132>: str r5, [r0, r1]
0x41b9fd50 <raise+136>: mvnne r0, #0
0x41b9fd54 <raise+140>: bne 0x41b9fd10 <raise+72>
0x41b9fd58 <raise+144>: mov r0, r3
---Type <return> to continue, or q <return> to quit---
0x41b9fd5c <raise+148>: mov r1, r4
0x41b9fd60 <raise+152>: mov r7, #238 ; 0xee
0x41b9fd64 <raise+156>: svc 0x00000000
0x41b9fd68 <raise+160>: cmn r0, #4096 ; 0x1000
0x41b9fd6c <raise+164>: bls 0x41b9fd10 <raise+72>
0x41b9fd70 <raise+168>: ldr r3, [pc, #20] ; 0x41b9fd8c <raise+196>
0x41b9fd74 <raise+172>: rsb r0, r0, #0
0x41b9fd78 <raise+176>: ldr r3, [pc, r3]
0x41b9fd7c <raise+180>: str r0, [r2, r3]
0x41b9fd80 <raise+184>: mvn r0, #0
0x41b9fd84 <raise+188>: b 0x41b9fd10 <raise+72>
0x41b9fd88 <raise+192>: andseq r2, r0, r8, lsr #8
0x41b9fd8c <raise+196>: andseq r2, r0, r12, ror #7
End of assembler dump.
(gdb)
"bt full" prints loads of:
#888 0x41ba3ca4 in abort () from /lib/libc.so.6
No symbol table info available.
I am currently researching into providing more info. Any help is appreciated. I'm currently trying building the tvheadend with gdb3 symbols.
BR,
-j
Updated by 
Updated by