Project

General

Profile

PCTV nanostick 290e

Added by James Hope over 11 years ago

I have this tv tuner card, in TV headend I select Sony CXD2820R (is this correct?). And then choose the TV broadcast that I receive. After scanning the 6 muxes I get no services. Why is this?
UK only transmits in DVB-T2 could this be the problem?


Replies (2)

RE: PCTV nanostick 290e - Added by Peter Betts over 11 years ago

Hi James,

I have the same USB tuner as you and it does appear as a SONY CXD2820R. I too had a problem not getting the muxes - it just would not work using the ADD DVB BY LOCATION.

To get it to work, I went to the wikiedia page of my transmitter, worked out what the frequency of the muxes were and manually added them instead. It then worked fine.

This is the page I used as I am tuned to the Bilsdale transmitter :

http://en.wikipedia.org/wiki/Bilsdale_transmitting_station

As you can see from this, I added the following muxes :

490.000 MHz 23 100 BBC B DVB-T2
514.000 MHz 26 100 BBC A DVB-T
538.000 MHz 29 100 Digital 3&4 DVB-T
626.000 MHz 40 50 Arqiva B DVB-T
650.000 MHz 43 50 SDN DVB-T
674.000 MHz 50 Arqiva A DVB-T

When I added then, I just chose AUTO for anything it asked for that I didn't understand.

Hope it works for you.

Also a tip specifically for the PCTV stick, make sure you don't plug it into a USB3 port as it doesn't seem to work. Also, just in case you don't know, all the HD channels are on the same Mux - this is great as the way TVHeadend works you can record every HD channel available with just one tuner (TVHeadend is able to record the whole mux).

RE: PCTV nanostick 290e - Added by Stephen Neal over 11 years ago

I think that a lot of the DVB-T/T2 stuff for the UK still has the old frequencies, modulation and carrier details from before digital switch-over. http://ukfree.tv is very good for details of your transmitter - you can then add the multiplexes manually very quickly.

My PCTV290e works really well with TV Headend - both on a Pink Pogoplug (Debian) and a newly built SandyBridge Pentium G630 + Minimal Ubuntu + XBMC set-up.

    (1-2/2)