Project

General

Profile

Freesat EPG - Now & Next only

Added by Spearfish _ almost 12 years ago

Hi

Running the Ubuntu PPA version of TVHeadend (3.2.18~g40a8920~precise) and have setup my DVB-S2 card as the Capture card. Added freesat muxes and mapped channels.

Unfortunately, the over-the-air EPG is only picking up programmes on 'Now & Next', not the full 7 days.

Any ideas?

Many thanks


Replies (3)

RE: Freesat EPG - Now & Next only - Added by Adam Sutton almost 12 years ago

There is a failing in my documentation and something I need to address. You must have the freesat EPG mux added, this will be auto-added if you have auto detect muxes enabled. However if you've manually entered your muxes you will need to include this one:

11426 H

Adam

RE: Freesat EPG - Now & Next only - Added by Spearfish _ almost 12 years ago

Adam

Thanks for the quick reply. 11426 H didn't work for me but I selected Auto Detect Muxes instead and sure enough it picked up the full EPG. I had added the freesat muxes manually so that I didn't have to manually delete all the chaff channels from a full scan. Seeing as I already have the channels setup it's not a problem now.

For info the nearest mux to the one you mentioned is 11426330 kHz V 27500 kBaud.

VMT

RE: Freesat EPG - Now & Next only - Added by Adam Sutton almost 12 years ago

That mux is the same (the minor deviation is due to that being what's reported in the NIT and will be slightly more accurate, but within tolerance of the tuner), but it might be that I was talking rubbish and gave you the wrong mux entirely ;)

Adam

    (1-3/3)