Tvheadend

Hi guys,

I am running (or better: I want to run) TVheadend on a QNAP NAS 879.
For a TV adapter I am using a TBS 5680 CI DVB-C adapter.
So far so good. With the help of virtualdj, the maintainer of the tvheadend qnap qpkg, I´ve tried to make the TBS 5680 running.

See: [[http://forum.qnap.com/viewtopic.php?f=276&t=62395]]

Problem is: the adapter is recognized by the qnap and the drivers and fw are installed properly:

DMESG is:

[ 3098.630118] dvb-usb: found a 'TBS 5680 CI USB2.0' in cold state, will try to load a firmware
[ 3098.630224] usb 1-1.4: firmware: requesting dvb-usb-tbsqbox-id5680.fw
[ 3098.632619] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5680.fw'
[ 3098.632721] usb 1-1.4: firmware: requesting dvb-usb-tbsqbox-id5680.fw
[ 3098.635464] tbs5680: start downloading TBS5680 CI firmware
[ 3098.752131] dvb-usb: found a 'TBS 5680 CI USB2.0' in warm state.
[ 3098.752339] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3098.752532] DVB: registering new adapter (TBS 5680 CI USB2.0)
[ 3098.976638] dvb-usb: MAC address: 00:22:ab:b2:00:b4
[ 3099.000387] tbs5680: Attached TBS5680FE!
[ 3099.000390]
[ 3099.000734] tbs5680: CI initialized.
[ 3099.000887] DVB: registering adapter 0 frontend 0 (TurboSight TBS 5680 DVBC frontend)...
[ 3099.001719] input: IR-receiver inside an USB DVB receiver as /class/input/input9
[ 3099.001868] dvb-usb: schedule remote query interval to 150 msecs.
[ 3099.001941] dvb-usb: TBS 5680 CI USB2.0 successfully initialized and connected.
[ 3099.002180] usbcore: registered new interface driver tbs5680
[ 3100.677333] tbs5680: CI enabled.
[ 3100.677414] dvb_ca adapter 0: DVB CAM detected and initialised successfully

lsusb is:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 734c:5680 TBS Technologies China
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 1005:b155 Apacer Technology, Inc.
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

but the adapter is not showing in TVheadend.
Can somebody help here?

I´ve tried using the adapter with Debian (amd64, 2.6.32-5) with the drivers from tbs and tvheadend 2.12 and it´s working properly there.
Any ideas what might be wrong?

Thanks in advance.

Dunhillsmoker