H264 and AC3 Continuity counter error ??

Added by Paul Rensel almost 14 years ago

I get these errors in Tvheadend System log.
What do they mean ?

Jan 19 22:41:30 TS: Montage Technology DS3000/TS2020/CANALDIGITAAL: 11,856,000 kHz Vertical (Astra 23.5)/Discovery HD: Transport error indicator

Jan 19 22:41:30 TS: Montage Technology DS3000/TS2020/CANALDIGITAAL: 11,856,000 kHz Vertical (Astra 23.5)/Discovery HD: H264 @ #512: Continuity counter error

Jan 19 22:43:36 TS: Montage Technology DS3000/TS2020/CANALDIGITAAL: 11,856,000 kHz Vertical (Astra 23.5)/Discovery HD: H264 @ #512: Continuity counter error

Jan 19 22:43:36 TS: Montage Technology DS3000/TS2020/CANALDIGITAAL: 11,856,000 kHz Vertical (Astra 23.5)/Discovery HD: AC3 @ #80: Continuity counter error

Jan 19 22:45:08 TS: Montage Technology DS3000/TS2020/CANALDIGITAAL: 11,856,000 kHz Vertical (Astra 23.5)/Discovery HD: H264 @ #512: Continuity counter error

Jan 19 22:45:27 TS: Montage Technology DS3000/TS2020/CANALDIGITAAL: 11,856,000 kHz Vertical (Astra 23.5)/Discovery HD: Transport error indicator

Jan 19 22:45:27 TS: Montage Technology DS3000/TS2020/CANALDIGITAAL: 11,856,000 kHz Vertical (Astra 23.5)/Discovery HD: AC3 @ #80: Continuity counter error

Jan 19 22:45:27 TS: Montage Technology DS3000/TS2020/CANALDIGITAAL: 11,856,000 kHz Vertical (Astra 23.5)/Discovery HD: H264 @ #512: Continuity counter error

Replies (2)

RE: H264 and AC3 Continuity counter error ?? - Added by Andreas Smas almost 14 years ago

Most likely it's because of bad signal reception

RE: H264 and AC3 Continuity counter error ?? - Added by Sergey Ivanov over 13 years ago

Same thing. Signal is 100%. On windows everything is ok. Adapter: SkyStar HD2. Circular LNB.
Tvheadend 2.12.99~git20110521.8281379~odk2~natty

Edit: I found, that adding 4-5 Mhz to initial mux's frequency solves the issue. Also, when I add dvb-s muxes with original frequency, I get "No signal", but adding 4-5 Mhz to original frequency, I get 100% signal...

(1-2/2)

Project

General

Profile

Tvheadend