Project

General

Profile

Opctopus NET Sat>IP Server

Added by Florian B over 3 years ago

Hi!

If use the Default configuration of the Sat>IP Tuners I get following error if I scan for channels:

2021-03-13 17:23:40.962 mpegts: 378MHz in Liwest - tuning on SAT>IP DVB-C Tuner #9 (192.168.0.179@UDP)

2021-03-13 17:23:40.962 subscription: 008D: "scan" subscribing to mux "378MHz", weight: 6, adapter: "SAT>IP DVB-C Tuner #9 (192.168.0.179@UDP)", network: "Liwest", service: "Raw PID Subscription" 

2021-03-13 17:23:40.964 satip: SAT>IP DVB-C Tuner #9 (192.168.0.179@UDP) - RTSP SETUP error -5 (I/O error) [6-404]

2021-03-13 17:23:41.013 satip: SAT>IP DVB-C Tuner #9 (192.168.0.179@UDP) - RTSP SETUP error -5 (I/O error) [6-404]

2021-03-13 17:23:45.962 mpegts: 378MHz in Liwest - scan no data, failed

If I configure the Tuner in TVHeadend that only one DVB-C tuner is activated(see pictures below) I can sucessfully scan for channels and watch them.
Any ideas why that is so?

tvheadend2.PNG (41.6 KB) tvheadend2.PNG Configuration with just one DVB-C Tuner
tvheadend1.PNG (76 KB) tvheadend1.PNG Default configuration

Replies (2)

RE: Opctopus NET Sat>IP Server - Added by saen acro over 3 years ago

try with view level Expert

RE: Opctopus NET Sat>IP Server - Added by Henrik Stelter over 3 years ago

just deactivate all unneeded tuner in your OctopusNet. I've got a MaxM4, but with all tunertypes activated a channelscan fails.
so i deactivated DVB-C & DVB-S and all went fine.

    (1-2/2)