Project

General

Profile

All Muxes FAIL ! (DVB-S + Switsh)

Added by Slim kheli almost 4 years ago

HI,
I'm new here and i don't whats hapening whith my DVB/S card or my be my bad configuration, i don't now !

  • I running Tvheadend with Openmediavault, Docker
  • HTS Tvheadend 4.3-1915~gfebcf9818 version
  • 4-Port switch (universal LNB) for only 3 Satelites (Astra 19.2E, Hotbird 13E and Nilsat 7.3W)
  • Pre-defined muxes for all

When i use satellite receiver, it work whithout problems but whithe a DVB Card , SNR do up and down, Signal strength is usely bad !
I don't know what is the problem, i need help !


Replies (15)

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by saen acro almost 4 years ago

You use predefined networks - delete them.
Add frequency manually NIT will do rest.

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by Slim kheli almost 4 years ago

I deleted all networks and i added last all frequencys one by one, i stoped TVH contenair for a moment but it's same thing "scan" unsubscribing

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by saen acro almost 4 years ago

I don't see any switch configured in your config.

Select adapter and in Satellite config: select 4-Port switch (universal LNB)
press SAVE
then you will see:

AA:
AB:
BA:
BB:

Where you nead to choice satelites in same order as in your diseqc switch.

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by saen acro almost 4 years ago

Or see diseqc switch or test one by one.

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by Slim kheli almost 4 years ago

saen acro wrote:

Or see diseqc switch or test one by one.

Hi Sean,

Thanks for your help, but that's not the problem, i tested one by one, it's same think for all port, 'bad signal strengn' all time !

I suspect Microsoft or something like that

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by saen acro almost 4 years ago

Set repeats to 1
and disable tune before.

see exactly how is configured on STB

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by Slim kheli almost 4 years ago

Thi's my DVB Card, it's old model, what do you think a bout it !?

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by Slim kheli almost 4 years ago

saen acro wrote:

Set repeats to 1
and disable tune before.

see exactly how is configured on STB

I found tune repeats and i changed value on 1, but STB where is't !? (I' use KODI)

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by saen acro almost 4 years ago

Do you know what is STB? (Set-Top Box)

How are you shure that is working?

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by Slim kheli almost 4 years ago

OK
But i don't understend whant you'r mean, it's in TVheadend interface or physicly STB ?

Need help

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by saen acro almost 4 years ago

You need to read more carefully.

You say:

When i use satellite receiver, it work whithout problems 

So on your STB work,
what are settings there?

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by Slim kheli almost 4 years ago

I tested that by insering LNB cable in out put card, connected that on STB ! nothing, fail olso ! but when i connect LNB directly on STB it work !


perfectly !

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by Slim kheli almost 4 years ago

I wanna put "Higher LNB voltage" on "Normal", but i'm afraid to screw up the Card,worst , maybe the Desktop

What do you thing ?

RE: All Muxes FAIL ! (DVB-S + Switsh) - Added by Slim kheli almost 4 years ago

Slim kheli wrote:

I wanna put "Higher LNB voltage" on "Normal", but i'm afraid to screw up the Card,worst , maybe the Desktop

What do you thing ?

That was it, it works, thank you so mutch Saen !!

    (1-15/15)