Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it
Added by Issa Issa about 4 years ago
Hello there,
so i got an ubuntu 20.04 LTS and an Avermedia AverTV Volar HD 2 (TD110)
stagiaire@plex:~$ lsusb
Bus 002 Device 002: ID 07ca:a110 AVerMedia Technologies, Inc. TD110
stagiaire@plex:~$ dmesg | grep dvb
[ 11.022752] dvb_usb_af9035 2-1:1.0: prechip_version=83 chip_version=02 chip_type=9135
[ 11.032427] usb 2-1: dvb_usb_v2: found a 'Avermedia AverTV Volar HD 2 (TD110)' in warm state
[ 11.032430] dvb_usb_af9035 2-1:1.0: [0] overriding tuner from 38 to 60
[ 11.035648] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 11.035684] dvbdev: DVB: registering new adapter (Avermedia AverTV Volar HD 2 (TD110))
[ 11.036166] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 11.168675] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[ 11.513238] rc rc0: lirc_dev: driver dvb_usb_af9035 registered at minor = 0, scancode receiver, no transmitter
[ 11.515017] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[ 11.515019] usb 2-1: dvb_usb_v2: 'Avermedia AverTV Volar HD 2 (TD110)' successfully initialized and connected
[ 11.515126] usbcore: registered new interface driver dvb_usb_af9035
[ 30.917269] audit: type=1400 audit(1599670520.784:39): apparmor="DENIED" operation="open" profile="snap.tvheadend.oscam" name="/dev/dvb/adapter0/demux0" pid=819 comm="oscam" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.167482] audit: type=1400 audit(1599670523.036:43): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.267879] audit: type=1400 audit(1599670523.136:44): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.368166] audit: type=1400 audit(1599670523.236:45): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.468459] audit: type=1400 audit(1599670523.340:46): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.568799] audit: type=1400 audit(1599670523.436:47): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.669062] audit: type=1400 audit(1599670523.540:48): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
and on TvHeadend i can"'t detect it :
can u help me to make it works on my tvheanded svp
Capture.PNG (20.9 KB) Capture.PNG |
Replies (10)
RE: Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it - Added by saen acro about 4 years ago
Wrong command used.
report this:
dmesg |egrep 'frontend|firmware|dvb|usb'
RE: Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it - Added by Issa Issa about 4 years ago
stagiaire@plex:~$ dmesg |egrep 'frontend|firmware|dvb|usb'
[ 0.209770] usbcore: registered new interface driver usbfs
[ 0.209778] usbcore: registered new interface driver hub
[ 0.209784] usbcore: registered new device driver usb
[ 0.262843] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x662 took 32048 usecs
[ 0.311477] pci 0000:01:1b.0: quirk_usb_early_handoff+0x0/0x662 took 47408 usecs
[ 0.546741] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.547340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.547894] usb usb1: Product: UHCI Host Controller
[ 0.548440] usb usb1: Manufacturer: Linux 5.4.0-45-generic uhci_hcd
[ 0.548988] usb usb1: SerialNumber: 0000:00:01.2
[ 0.569780] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.570348] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.570970] usb usb2: Product: xHCI Host Controller
[ 0.571563] usb usb2: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[ 0.572120] usb usb2: SerialNumber: 0000:01:1b.0
[ 0.575862] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.576459] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.577083] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.577675] usb usb3: Product: xHCI Host Controller
[ 0.578281] usb usb3: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[ 0.578870] usb usb3: SerialNumber: 0000:01:1b.0
[ 1.125051] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 1.281479] usb 1-1: not running at top speed; connect to a high speed hub
[ 1.315332] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[ 1.315359] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
[ 1.315380] usb 1-1: Product: QEMU USB Tablet
[ 1.315392] usb 1-1: Manufacturer: QEMU
[ 1.315402] usb 1-1: SerialNumber: 28754-0000:00:01.2-1
[ 1.329389] usbcore: registered new interface driver usbhid
[ 1.329410] usbhid: USB HID core driver
[ 1.331646] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input5
[ 1.331920] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 1.429094] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1.582682] usb 2-1: New USB device found, idVendor=07ca, idProduct=a110, bcdDevice= 2.00
[ 1.582732] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.582766] usb 2-1: Product: TD110
[ 1.582792] usb 2-1: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
[ 1.582822] usb 2-1: SerialNumber: 201107200687
[ 11.022752] dvb_usb_af9035 2-1:1.0: prechip_version=83 chip_version=02 chip_type=9135
[ 11.032427] usb 2-1: dvb_usb_v2: found a 'Avermedia AverTV Volar HD 2 (TD110)' in warm state
[ 11.032430] dvb_usb_af9035 2-1:1.0: [0] overriding tuner from 38 to 60
[ 11.035648] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 11.035684] dvbdev: DVB: registering new adapter (Avermedia AverTV Volar HD 2 (TD110))
[ 11.035686] usb 2-1: media controller created
[ 11.036166] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 11.168617] af9033 1-001c: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[ 11.168670] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 11.168675] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[ 11.513082] rc rc0: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0
[ 11.513238] rc rc0: lirc_dev: driver dvb_usb_af9035 registered at minor = 0, scancode receiver, no transmitter
[ 11.514935] input: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0/input6
[ 11.515017] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[ 11.515019] usb 2-1: dvb_usb_v2: 'Avermedia AverTV Volar HD 2 (TD110)' successfully initialized and connected
[ 11.515126] usbcore: registered new interface driver dvb_usb_af9035
[ 30.917269] audit: type=1400 audit(1599670520.784:39): apparmor="DENIED" operation="open" profile="snap.tvheadend.oscam" name="/dev/dvb/adapter0/demux0" pid=819 comm="oscam" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.167482] audit: type=1400 audit(1599670523.036:43): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.267879] audit: type=1400 audit(1599670523.136:44): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.368166] audit: type=1400 audit(1599670523.236:45): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.468459] audit: type=1400 audit(1599670523.340:46): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.568799] audit: type=1400 audit(1599670523.436:47): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 33.669062] audit: type=1400 audit(1599670523.540:48): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
what do u think
RE: Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it - Added by saen acro about 4 years ago
Stop use and delete this stupiditi SNAP
install regular TVH and all wil work.
RE: Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it - Added by Issa Issa about 4 years ago
hello i removed id :
i compile the Tvheadend :
stagiaire@plex:~$ tvheadend -C
2020-09-10 17:55:17.369 [ INFO] main: Log started
2020-09-10 17:55:17.369 [ INFO] http: Starting HTTP server 0.0.0.0:9981
2020-09-10 17:55:17.369 [ INFO] htsp: Starting HTSP server 0.0.0.0:9982
2020-09-10 17:55:17.522 [ INFO] config: loaded
2020-09-10 17:55:17.523 [ INFO] transcode: 'video' context type registered
2020-09-10 17:55:17.523 [ INFO] transcode: 'audio' context type registered
2020-09-10 17:55:17.523 [ INFO] transcode: '&TVHH264Decoder' decoder helper registered
2020-09-10 17:55:17.524 [ INFO] transcode: '&TVHTHEORADecoder' decoder helper registered
2020-09-10 17:55:17.524 [ INFO] transcode: '&TVHAACDecoder' decoder helper registered
2020-09-10 17:55:17.524 [ INFO] transcode: '&TVHVORBISDecoder' decoder helper registered
2020-09-10 17:55:17.524 [ INFO] transcode: '&TVHOPUSDecoder' decoder helper registered
2020-09-10 17:55:17.524 [ INFO] transcode: '&TVHMPEG2VIDEOEncoder' encoder helper registered
2020-09-10 17:55:17.525 [ INFO] transcode: '&TVHH264Encoder' encoder helper registered
2020-09-10 17:55:17.525 [ INFO] transcode: '&TVHHEVCEncoder' encoder helper registered
2020-09-10 17:55:17.525 [ INFO] transcode: '&TVHAACEncoder' encoder helper registered
2020-09-10 17:55:17.525 [ INFO] codec: 'mpeg2video' encoder registered
2020-09-10 17:55:17.526 [ INFO] codec: 'mp2' encoder registered
2020-09-10 17:55:17.526 [ INFO] codec: 'aac' encoder registered
2020-09-10 17:55:17.526 [ INFO] codec: 'vorbis' encoder registered
2020-09-10 17:55:17.526 [ INFO] codec: 'flac' encoder registered
2020-09-10 17:55:17.527 [ INFO] codec: 'libx264' encoder registered
2020-09-10 17:55:17.527 [ INFO] codec: 'libx265' encoder registered
2020-09-10 17:55:17.527 [ INFO] codec: 'libvpx' encoder registered
2020-09-10 17:55:17.527 [ INFO] codec: 'libvpx-vp9' encoder registered
2020-09-10 17:55:17.527 [ INFO] codec: 'libtheora' encoder registered
2020-09-10 17:55:17.528 [ INFO] codec: 'libvorbis' encoder registered
2020-09-10 17:55:17.528 [ INFO] codec: 'libopus' encoder registered
2020-09-10 17:55:17.528 [ INFO] codec: 'h264_vaapi' encoder registered
2020-09-10 17:55:17.528 [ INFO] codec: 'hevc_vaapi' encoder registered
2020-09-10 17:55:17.528 [ INFO] codec: 'vp8_vaapi' encoder registered
2020-09-10 17:55:17.529 [ INFO] codec: 'vp9_vaapi' encoder registered
2020-09-10 17:55:17.529 [ INFO] codec: 'webtv-h264' codec profile created
2020-09-10 17:55:17.529 [ INFO] codec: 'webtv-vp8' codec profile created
2020-09-10 17:55:17.529 [ INFO] codec: 'webtv-aac' codec profile created
2020-09-10 17:55:17.530 [ INFO] codec: 'webtv-vorbis' codec profile created
2020-09-10 17:55:17.530 [ INFO] config: scanfile (re)initialization with path <none>
2020-09-10 17:55:17.531 [ INFO] descrambler: adding CAID 2600/FFFF as ConstCW interval 10000ms pc 20 ep default (BISS)
2020-09-10 17:55:17.531 [ INFO] descrambler: adding CAID 0E00/FFFF as MultiPID interval 1000ms pc 2 ep default (PowerVu)
2020-09-10 17:55:17.532 [ INFO] iptv: Using 2 input thread(s)
2020-09-10 17:55:17.628 [ INFO] scanfile: DVB-S - loaded 1 regions with 115 networks
2020-09-10 17:55:17.628 [ INFO] scanfile: DVB-T - loaded 44 regions with 1120 networks
2020-09-10 17:55:17.629 [ INFO] scanfile: DVB-C - loaded 19 regions with 63 networks
2020-09-10 17:55:17.629 [ INFO] scanfile: ATSC-T - loaded 2 regions with 12 networks
2020-09-10 17:55:17.629 [ INFO] scanfile: ATSC-C - loaded 1 regions with 5 networks
2020-09-10 17:55:17.630 [ INFO] scanfile: ISDB-T - loaded 2 regions with 1297 networks
2020-09-10 17:55:19.536 [ INFO] dvr: Creating new configuration ''
2020-09-10 17:55:19.536 [WARNING] access: Created default wide open access controle entry
2020-09-10 17:55:19.537 [ INFO] epggrab: module uk_freesat created
2020-09-10 17:55:19.537 [ INFO] epggrab: module uk_freesat_eit created
2020-09-10 17:55:19.538 [ INFO] epggrab: module uk_freeview created
2020-09-10 17:55:19.538 [ INFO] epggrab: module nz_freeview2 created
2020-09-10 17:55:19.538 [ INFO] epggrab: module nz_freeview1 created
2020-09-10 17:55:19.538 [ INFO] epggrab: module viasat_baltic created
2020-09-10 17:55:19.539 [ INFO] epggrab: module Bulsatcom_39E created
2020-09-10 17:55:19.539 [ INFO] epggrab: module uk_cable_virgin created
2020-09-10 17:55:19.539 [ INFO] epggrab: module eit created
2020-09-10 17:55:19.539 [ INFO] epggrab: module psip created
2020-09-10 17:55:19.541 [ INFO] epggrab: module opentv-skyuk created
2020-09-10 17:55:19.542 [ INFO] epggrab: module opentv-ausat created
2020-09-10 17:55:19.542 [ INFO] epggrab: module opentv-skynz created
2020-09-10 17:55:19.542 [ INFO] epggrab: module opentv-skyit created
2020-09-10 17:55:19.543 [ INFO] epggrab: module xmltv created
2020-09-10 17:55:19.545 [ INFO] tbl-eit: module eit - scraper disabled by config
2020-09-10 17:55:19.546 [ INFO] epgdb: gzip format detected, inflating (ratio 138.6% deflated size 79)
2020-09-10 17:55:19.546 [ INFO] epgdb: parsing 57 bytes
2020-09-10 17:55:19.546 [ INFO] epgdb: loaded v3
2020-09-10 17:55:19.547 [ INFO] epgdb: config 1
2020-09-10 17:55:19.547 [ INFO] epgdb: broadcasts 0
2020-09-10 17:55:19.547 [ INFO] dvr: Purging obsolete autorec entries for current schedule
2020-09-10 17:55:19.547 [ NOTICE] START: HTS Tvheadend version 4.3-1896~gce0907705 started, running as PID:28541 UID:1000 GID:1000, CWD:/home/stagiaire CNF:/home/stagiaire/.hts/tvheadend
so when i connect i still no card detected
stagiaire@plex:~$ dmesg |egrep 'frontend|firmware|dvb|usb'
[ 0.302862] usbcore: registered new interface driver usbfs
[ 0.303118] usbcore: registered new interface driver hub
[ 0.303366] usbcore: registered new device driver usb
[ 0.373458] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x662 took 31380 usecs
[ 0.422589] pci 0000:01:1b.0: quirk_usb_early_handoff+0x0/0x662 took 47190 usecs
[ 0.661870] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.662272] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.662645] usb usb1: Product: UHCI Host Controller
[ 0.662908] usb usb1: Manufacturer: Linux 5.4.0-47-generic uhci_hcd
[ 0.663186] usb usb1: SerialNumber: 0000:00:01.2
[ 0.681878] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.682248] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.682652] usb usb2: Product: xHCI Host Controller
[ 0.682877] usb usb2: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
[ 0.683139] usb usb2: SerialNumber: 0000:01:1b.0
[ 0.685031] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.685443] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.685836] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.686173] usb usb3: Product: xHCI Host Controller
[ 0.686398] usb usb3: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
[ 0.686713] usb usb3: SerialNumber: 0000:01:1b.0
[ 1.236112] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 1.392918] usb 1-1: not running at top speed; connect to a high speed hub
[ 1.426031] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[ 1.426059] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
[ 1.426076] usb 1-1: Product: QEMU USB Tablet
[ 1.426087] usb 1-1: Manufacturer: QEMU
[ 1.426098] usb 1-1: SerialNumber: 28754-0000:00:01.2-1
[ 1.440155] usbcore: registered new interface driver usbhid
[ 1.440173] usbhid: USB HID core driver
[ 1.442402] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input5
[ 1.442649] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 1.520139] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1.674024] usb 2-1: New USB device found, idVendor=07ca, idProduct=a110, bcdDevice= 2.00
[ 1.674050] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.674067] usb 2-1: Product: TD110
[ 1.674077] usb 2-1: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
[ 1.674093] usb 2-1: SerialNumber: 201107200687
[ 11.509388] dvb_usb_af9035 2-1:1.0: prechip_version=83 chip_version=02 chip_type=9135
[ 11.518442] usb 2-1: dvb_usb_v2: found a 'Avermedia AverTV Volar HD 2 (TD110)' in warm state
[ 11.518445] dvb_usb_af9035 2-1:1.0: [0] overriding tuner from 38 to 60
[ 11.518983] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 11.518997] dvbdev: DVB: registering new adapter (Avermedia AverTV Volar HD 2 (TD110))
[ 11.518999] usb 2-1: media controller created
[ 11.519442] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 11.612239] af9033 1-001c: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[ 11.612255] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 11.612264] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[ 11.788434] rc rc0: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0
[ 11.788527] rc rc0: lirc_dev: driver dvb_usb_af9035 registered at minor = 0, scancode receiver, no transmitter
[ 11.788610] input: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0/input6
[ 11.788683] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[ 11.788686] usb 2-1: dvb_usb_v2: 'Avermedia AverTV Volar HD 2 (TD110)' successfully initialized and connected
[ 11.788760] usbcore: registered new interface driver dvb_usb_af9035
stagiaire@plex:~$ lsusb
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 07ca:a110 AVerMedia Technologies, Inc. TD110
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd QEMU USB Tablet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
RE: Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it - Added by Issa Issa about 4 years ago
Hello there, please need u help
so i got tvheadend installed and worksn but he can see my USb TV TNT key :
i see it on command line :
stagiaire@plex:~$ lsusb
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 07ca:a110 AVerMedia Technologies, Inc. TD110
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd QEMU USB Tablet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
look this command :
stagiaire@plex:~$ dmesg |egrep 'frontend|firmware|dvb|usb'
[ 0.210952] usbcore: registered new interface driver usbfs
[ 0.210961] usbcore: registered new interface driver hub
[ 0.210967] usbcore: registered new device driver usb
[ 0.264056] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x662 took 31653 usecs
[ 0.313078] pci 0000:01:1b.0: quirk_usb_early_handoff+0x0/0x662 took 47785 usecs
[ 0.566542] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.567105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.567661] usb usb1: Product: UHCI Host Controller
[ 0.568249] usb usb1: Manufacturer: Linux 5.4.0-45-generic uhci_hcd
[ 0.568799] usb usb1: SerialNumber: 0000:00:01.2
[ 0.589526] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.590095] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.590654] usb usb2: Product: xHCI Host Controller
[ 0.591208] usb usb2: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[ 0.591765] usb usb2: SerialNumber: 0000:01:1b.0
[ 0.595467] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.596104] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.596698] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.597291] usb usb3: Product: xHCI Host Controller
[ 0.597887] usb usb3: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[ 0.598476] usb usb3: SerialNumber: 0000:01:1b.0
[ 1.141568] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 1.298705] usb 1-1: not running at top speed; connect to a high speed hub
[ 1.331059] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[ 1.331088] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
[ 1.331108] usb 1-1: Product: QEMU USB Tablet
[ 1.331121] usb 1-1: Manufacturer: QEMU
[ 1.331132] usb 1-1: SerialNumber: 28754-0000:00:01.2-1
[ 1.344870] usbcore: registered new interface driver usbhid
[ 1.344887] usbhid: USB HID core driver
[ 1.346987] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input5
[ 1.347175] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 1.437589] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1.591379] usb 2-1: New USB device found, idVendor=07ca, idProduct=a110, bcdDevice= 2.00
[ 1.591408] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.591428] usb 2-1: Product: TD110
[ 1.591438] usb 2-1: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
[ 1.591462] usb 2-1: SerialNumber: 201107200687
[ 10.436763] dvb_usb_af9035 2-1:1.0: prechip_version=83 chip_version=02 chip_type=9135
[ 10.445630] usb 2-1: dvb_usb_v2: found a 'Avermedia AverTV Volar HD 2 (TD110)' in warm state
[ 10.445632] dvb_usb_af9035 2-1:1.0: [0] overriding tuner from 38 to 60
[ 10.446183] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 10.446222] dvbdev: DVB: registering new adapter (Avermedia AverTV Volar HD 2 (TD110))
[ 10.446224] usb 2-1: media controller created
[ 10.446724] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 10.489108] af9033 1-001c: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[ 10.489123] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 10.489126] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[ 10.609628] rc rc0: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0
[ 10.609677] rc rc0: lirc_dev: driver dvb_usb_af9035 registered at minor = 0, scancode receiver, no transmitter
[ 10.609703] input: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0/input6
[ 10.609932] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[ 10.609934] usb 2-1: dvb_usb_v2: 'Avermedia AverTV Volar HD 2 (TD110)' successfully initialized and connected
[ 10.609957] usbcore: registered new interface driver dvb_usb_af9035
[ 28.199084] usb 2-1: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)
but on TvHeadend still nothing, can help me to found why please :
image joint
thanks all
Capture.PNG (24.7 KB) Capture.PNG |
RE: Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it - Added by Issa Issa about 4 years ago
Hello there, please need u help
so i got tvheadend installed and worksn but he can see my USb TV TNT key :
i see it on command line :
stagiaire@plex:~$ lsusb
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 07ca:a110 AVerMedia Technologies, Inc. TD110
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd QEMU USB Tablet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
look this command :
stagiaire@plex:~$ dmesg |egrep 'frontend|firmware|dvb|usb'
[ 0.210952] usbcore: registered new interface driver usbfs
[ 0.210961] usbcore: registered new interface driver hub
[ 0.210967] usbcore: registered new device driver usb
[ 0.264056] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x662 took 31653 usecs
[ 0.313078] pci 0000:01:1b.0: quirk_usb_early_handoff+0x0/0x662 took 47785 usecs
[ 0.566542] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.567105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.567661] usb usb1: Product: UHCI Host Controller
[ 0.568249] usb usb1: Manufacturer: Linux 5.4.0-45-generic uhci_hcd
[ 0.568799] usb usb1: SerialNumber: 0000:00:01.2
[ 0.589526] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.590095] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.590654] usb usb2: Product: xHCI Host Controller
[ 0.591208] usb usb2: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[ 0.591765] usb usb2: SerialNumber: 0000:01:1b.0
[ 0.595467] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.596104] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.596698] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.597291] usb usb3: Product: xHCI Host Controller
[ 0.597887] usb usb3: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[ 0.598476] usb usb3: SerialNumber: 0000:01:1b.0
[ 1.141568] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 1.298705] usb 1-1: not running at top speed; connect to a high speed hub
[ 1.331059] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[ 1.331088] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
[ 1.331108] usb 1-1: Product: QEMU USB Tablet
[ 1.331121] usb 1-1: Manufacturer: QEMU
[ 1.331132] usb 1-1: SerialNumber: 28754-0000:00:01.2-1
[ 1.344870] usbcore: registered new interface driver usbhid
[ 1.344887] usbhid: USB HID core driver
[ 1.346987] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input5
[ 1.347175] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 1.437589] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1.591379] usb 2-1: New USB device found, idVendor=07ca, idProduct=a110, bcdDevice= 2.00
[ 1.591408] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.591428] usb 2-1: Product: TD110
[ 1.591438] usb 2-1: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
[ 1.591462] usb 2-1: SerialNumber: 201107200687
[ 10.436763] dvb_usb_af9035 2-1:1.0: prechip_version=83 chip_version=02 chip_type=9135
[ 10.445630] usb 2-1: dvb_usb_v2: found a 'Avermedia AverTV Volar HD 2 (TD110)' in warm state
[ 10.445632] dvb_usb_af9035 2-1:1.0: [0] overriding tuner from 38 to 60
[ 10.446183] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 10.446222] dvbdev: DVB: registering new adapter (Avermedia AverTV Volar HD 2 (TD110))
[ 10.446224] usb 2-1: media controller created
[ 10.446724] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 10.489108] af9033 1-001c: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[ 10.489123] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 10.489126] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[ 10.609628] rc rc0: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0
[ 10.609677] rc rc0: lirc_dev: driver dvb_usb_af9035 registered at minor = 0, scancode receiver, no transmitter
[ 10.609703] input: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0/input6
[ 10.609932] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[ 10.609934] usb 2-1: dvb_usb_v2: 'Avermedia AverTV Volar HD 2 (TD110)' successfully initialized and connected
[ 10.609957] usbcore: registered new interface driver dvb_usb_af9035
[ 28.199084] usb 2-1: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)
but on TvHeadend still nothing, can help me to found why please :
image joint
but still no channel found on tvheadend :'(
thanks all
Capture.PNG (24.7 KB) Capture.PNG |
RE: Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it - Added by saen acro about 4 years ago
Let's see is it work
dvb-fe-tool -a 0 -f 0 -m -v
Then let's see if it's occupied by someone else
lsof /dev/dvb/adapter0/frontend0
RE: Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it - Added by Issa Issa about 4 years ago
Hello, so i god news :
now the key can see on the tvheadend interface :
Capture 1 : Can see the key on TVHEADEND interface
Capture 2 : can see the network parameter
Capture 3 : The muxes are all failed
Capture 4 : can see status on tv headend interface :
tje resit pf command :
stagiaire@plex:~$ sudo dvb-fe-tool -a 0 -f 0 -m -v
Device Afatech AF9033 (DVB-T) (/dev/dvb/adapter0/frontend0) capabilities:
CAN_FEC_1_2
CAN_FEC_2_3
CAN_FEC_3_4
CAN_FEC_5_6
CAN_FEC_7_8
CAN_FEC_AUTO
CAN_GUARD_INTERVAL_AUTO
CAN_HIERARCHY_AUTO
CAN_INVERSION_AUTO
CAN_MUTE_TS
CAN_QAM_16
CAN_QAM_64
CAN_QAM_AUTO
CAN_QPSK
CAN_RECOVER
CAN_TRANSMISSION_MODE_AUTO
DVB API Version 5.11, Current v5 delivery system: DVBT
Supported delivery system:
[DVBT]
Frequency range for the current standard:
From: 174 MHz
To: 862 MHz
Step: 250 kHz
RF (0x01) Quality= Poor Signal= -79.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF (0x01) Quality= Poor Signal= -59.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF (0x01) Quality= Poor Signal= -59.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF (0x01) Quality= Poor Signal= -75.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF (0x01) Quality= Poor Signal= -75.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF (0x01) Quality= Poor Signal= -62.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF (0x01) Quality= Poor Signal= -79.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
(0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
Got parameters for DVBT:
FREQUENCY = 618000000
MODULATION = QAM/64
BANDWIDTH_HZ = 8000000
INVERSION = AUTO
CODE_RATE_HP = 3/4
CODE_RATE_LP = 1/2
GUARD_INTERVAL = 1/8
TRANSMISSION_MODE = 8K
HIERARCHY = NONE
DELIVERY_SYSTEM = DVBT
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 0.01dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.40dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.37dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.45dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.21dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.24dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.57dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.46dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.38dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.07dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.48dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.38dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.42dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.43dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.17dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.27dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.34dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.35dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.40dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.30dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.66dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.36dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.41dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.12dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.22dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.36dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.45dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.37dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.14dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.20dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.29dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.41dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.23dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.43dB UCB= 2655 postBER= 0 PER= 0
Lock (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.33dB UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
RF (0x01) Quality= Good Signal= -86.00dBm UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
RF (0x01) Quality= Good Signal= -80.00dBm UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
RF (0x01) Quality= Good Signal= -86.00dBm UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
(0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
the second command :
stagiaire@plex:~$ lsof /dev/dvb/adapter0/frontend0
stagiaire@plex:~$ lsof /dev/dvb/adapter0/frontend0
stagiaire@plex:~$
tvheadedn01.PNG (63.8 KB) tvheadedn01.PNG | |||
tvheadedn02.PNG (37 KB) tvheadedn02.PNG | |||
tvheadedn03.PNG (127 KB) tvheadedn03.PNG | |||
tvheadedn04.PNG (22.2 KB) tvheadedn04.PNG |
RE: Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it - Added by saen acro about 4 years ago
Your signal is too worst
# dvb-fe-tool -a 0 -f 0 -m -v Device DiBcom 3000MC/P (/dev/dvb/adapter0/frontend0) capabilities: CAN_FEC_1_2 CAN_FEC_2_3 CAN_FEC_3_4 CAN_FEC_5_6 CAN_FEC_7_8 CAN_FEC_AUTO CAN_GUARD_INTERVAL_AUTO CAN_HIERARCHY_AUTO CAN_INVERSION_AUTO CAN_QAM_16 CAN_QAM_64 CAN_QAM_AUTO CAN_QPSK CAN_RECOVER CAN_TRANSMISSION_MODE_AUTO DVB API Version 5.11, Current v5 delivery system: DVBT Supported delivery system: [DVBT] Got parameters for DVBT: FREQUENCY = 626000000 MODULATION = QAM/64 BANDWIDTH_HZ = 8000000 INVERSION = AUTO CODE_RATE_HP = 2/3 CODE_RATE_LP = 1/2 GUARD_INTERVAL = 1/4 TRANSMISSION_MODE = 8K HIERARCHY = NONE DELIVERY_SYSTEM = DVBT Lock (0x1f) Signal= 69,27% C/N= 0,00% UCB= 0 postBER= 0 Lock (0x1f) Signal= 69,43% C/N= 0,00% UCB= 0 postBER= 0 Lock (0x1f) Signal= 69,23% C/N= 0,00% UCB= 0 postBER= 0 Lock (0x1f) Signal= 69,41% C/N= 0,00% UCB= 0 postBER= 0 Lock (0x1f) Signal= 69,48% C/N= 0,00% UCB= 0 postBER= 0 Lock (0x1f) Signal= 70,31% C/N= 0,00% UCB= 0 postBER= 0 Lock (0x1f) Signal= 69,05% C/N= 0,00% UCB= 0 postBER= 0
same can be seen with femon
# femon
FE: DiBcom 3000MC/P (DVBT)
status SCVYL | signal b1bc | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal b1d2 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal b226 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal b08c | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal b084 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
^C
# femon -H
FE: DiBcom 3000MC/P (DVBT)
status SCVYL | signal 69% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK
status SCVYL | signal 68% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK
status SCVYL | signal 69% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK
status SCVYL | signal 69% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK
RE: Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it - Added by Issa Issa about 4 years ago
Hello
so i found my problem, i m not using the good keys
the Avermedia AverTV Volar HD 2 (TD110) is not working on linux, the good one is the : AVerMedia Technologies, Inc. AVerTV Volar Green HD (A835B)
and now works
well well well
thanks u all for u help
tvheadedn06.PNG (47.6 KB) tvheadedn06.PNG |