Tvheadend

Just bought a raspberry pi4 in order to use it with an nvidia shield and tvheadend.
However it seems that I can't get tvheadend to work, cause I get no channels. I believe it's a firmware issue cause i keep getting error messages.
When i execute dmesg command I get this.
I have already tried to download and put the relevant firmware at lib/firmware folder but problem persists.
Any idea? I m totally noob in this, so I would need step by step instructions.
Thanks in advance.

pi@raspberrypi:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.118-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 SMP Mon Apr 27 14:26:42 BST 2020
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000
[ 0.000000] On node 0 totalpages: 1012736
[ 0.000000] DMA zone: 1728 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 816128 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s36928 r8192 d24512 u69632
[ 0.000000] pcpu-alloc: s36928 r8192 d24512 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=DC:A6:32:66:CB:35 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea993717-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 3735552K/4050944K available (8192K kernel code, 690K rwdata, 2420K rodata, 2048K init, 860K bss, 53248K reserved, 262144K cma-reserved, 3264512K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0x(ptrval) - 0x(ptrval) (10208 kB)
.init : 0x(ptrval) - 0x(ptrval) (2048 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 691 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 861 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 28928 entries in 85 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000018] Switching to timer-based delay loop, resolution 18ns
[ 0.000247] Console: colour dummy device 80x30
[ 0.000270] console [tty1] enabled
[ 0.000312] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ 0.000329] pid_max: default: 32768 minimum: 301
[ 0.000599] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000617] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001368] CPU: Testing write buffer coherency: ok
[ 0.001778] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002420] Setting up static identity map for 0x200000 - 0x20003c
[ 0.002579] rcu: Hierarchical SRCU implementation.
[ 0.003435] smp: Bringing up secondary CPUs ...
[ 0.004241] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.005165] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.006041] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.006159] smp: Brought up 1 node, 4 CPUs
[ 0.006172] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.006181] CPU: All CPU started in HYP mode.
[ 0.006190] CPU: Virtualization extensions available.
[ 0.006984] devtmpfs: initialized
[ 0.017685] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ 0.017902] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017923] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.025294] pinctrl core: initialized pinctrl subsystem
[ 0.026139] NET: Registered protocol family 16
[ 0.029190] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.030791] hw-breakpoint: found 5 (1 reserved) breakpoint and 4 watchpoint registers.
[ 0.030801] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.030990] Serial: AMBA PL011 UART driver
[ 0.034078] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.050039] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-01 13:23, variant start
[ 0.060054] raspberrypi-firmware soc:firmware: Firmware hash is 6379679d1ec6a8c746d7e77e015f5b56b939976f
[ 0.102786] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.105881] vgaarb: loaded
[ 0.106241] SCSI subsystem initialized
[ 0.106430] usbcore: registered new interface driver usbfs
[ 0.106488] usbcore: registered new interface driver hub
[ 0.106556] usbcore: registered new device driver usb
[ 0.107926] clocksource: Switched to clocksource arch_sys_counter
[ 0.185969] VFS: Disk quotas dquot_6.6.0
[ 0.186048] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.186188] FS-Cache: Loaded
[ 0.186375] CacheFiles: Loaded
[ 0.186878] simple-framebuffer: probe of 0.framebuffer failed with error -12
[ 0.196013] NET: Registered protocol family 2
[ 0.196654] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.196680] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.196745] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.196816] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.196935] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.196962] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.197154] NET: Registered protocol family 1
[ 0.197704] RPC: Registered named UNIX socket transport module.
[ 0.197714] RPC: Registered udp transport module.
[ 0.197723] RPC: Registered tcp transport module.
[ 0.197733] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.197747] PCI: CLS 0 bytes, default 64
[ 0.199711] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.201804] Initialise system trusted keyrings
[ 0.202004] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 0.210974] FS-Cache: Netfs 'nfs' registered for caching
[ 0.211473] NFS: Registering the id_resolver key type
[ 0.211496] Key type id_resolver registered
[ 0.211505] Key type id_legacy registered
[ 0.211524] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.216026] Key type asymmetric registered
[ 0.216037] Asymmetric key parser 'x509' registered
[ 0.216147] bounce: pool size: 64 pages
[ 0.216193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.216355] io scheduler noop registered
[ 0.216366] io scheduler deadline registered (default)
[ 0.216523] io scheduler cfq registered
[ 0.216534] io scheduler mq-deadline registered (default)
[ 0.216544] io scheduler kyber registered
[ 0.247177] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
[ 0.247196] brcm-pcie fd500000.pcie: could not get clock
[ 0.247256] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.247294] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
[ 0.297963] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[ 0.298225] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.298241] pci_bus 0000:00: root bus resource [bus 00-01]
[ 0.298258] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 0.298300] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.298437] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.301191] PCI: bus0: Fast back to back transfers disabled
[ 0.301209] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.301423] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.301548] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.301865] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 0.304608] PCI: bus1: Fast back to back transfers disabled
[ 0.304623] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
[ 0.304669] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 0.304689] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 0.304759] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.304777] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 0.304982] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.305148] pcieport 0000:00:00.0: Signaling PME with IRQ 52
[ 0.305302] pcieport 0000:00:00.0: AER enabled with IRQ 52
[ 0.305467] pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 0.309528] iproc-rng200 fe104000.rng: hwrng registered
[ 0.309748] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.310231] vc-sm: Videocore shared memory driver
[ 0.310620] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 0.320755] brd: module loaded
[ 0.330379] loop: module loaded
[ 0.331119] Loading iSCSI transport class v2.0-870.
[ 0.332779] libphy: Fixed MDIO Bus: probed
[ 0.333175] bcmgenet fd580000.genet: failed to get enet clock
[ 0.333191] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
[ 0.333208] bcmgenet fd580000.genet: failed to get enet-wol clock
[ 0.333224] bcmgenet fd580000.genet: failed to get enet-eee clock
[ 0.333246] bcmgenet: Skipping UMAC reset
[ 0.333486] unimac-mdio unimac-mdio.-19: DMA mask not set
[ 0.347954] libphy: bcmgenet MII bus: probed
[ 0.388454] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
[ 0.389356] usbcore: registered new interface driver r8152
[ 0.389415] usbcore: registered new interface driver lan78xx
[ 0.389467] usbcore: registered new interface driver smsc95xx
[ 0.389771] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.389801] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 0.392001] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
[ 0.392304] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 53
[ 0.393125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.393139] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.393151] usb usb1: Product: xHCI Host Controller
[ 0.393162] usb usb1: Manufacturer: Linux 4.19.118-v7l xhci-hcd
[ 0.393173] usb usb1: SerialNumber: 0000:01:00.0
[ 0.393710] hub 1-0:1.0: USB hub found
[ 0.393789] hub 1-0:1.0: 1 port detected
[ 0.394249] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.394271] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 0.394296] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 0.394709] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 0.394722] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.394734] usb usb2: Product: xHCI Host Controller
[ 0.394744] usb usb2: Manufacturer: Linux 4.19.118-v7l+ xhci-hcd
[ 0.394755] usb usb2: SerialNumber: 0000:01:00.0
[ 0.395235] hub 2-0:1.0: USB hub found
[ 0.395301] hub 2-0:1.0: 4 ports detected
[ 0.396485] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.396670] dwc_otg: FIQ enabled
[ 0.396679] dwc_otg: NAK holdoff enabled
[ 0.396688] dwc_otg: FIQ split-transaction FSM enabled
[ 0.396700] Module dwc_common_port init
[ 0.396900] usbcore: registered new interface driver uas
[ 0.397007] usbcore: registered new interface driver usb-storage
[ 0.397180] mousedev: PS/2 mouse device common for all mice
[ 0.398368] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.399966] sdhci: Secure Digital Host Controller Interface driver
[ 0.399975] sdhci: Copyright(c) Pierre Ossman
[ 0.400374] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 0.400786] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.403777] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.403920] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.404038] usbcore: registered new interface driver usbhid
[ 0.404046] usbhid: USB HID core driver
[ 0.404810] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.406528] [vc_sm_connected_init]: start
[ 0.415330] [vc_sm_connected_init]: end - returning 0
[ 0.416422] Initializing XFRM netlink socket
[ 0.416450] NET: Registered protocol family 17
[ 0.416541] Key type dns_resolver registered
[ 0.416990] Registering SWP/SWPB emulation handler
[ 0.417571] registered taskstats version 1
[ 0.417588] Loading compiled-in X.509 certificates
[ 0.424508] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 0.424569] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
[ 0.429621] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 0.430132] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[ 0.430764] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 0.430775] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 0.456797] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.3
[ 0.456887] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.4
[ 0.474128] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.475718] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.477309] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.480191] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.481780] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.490677] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 0.493135] of_cfs_init
[ 0.493221] of_cfs_init: OK
[ 0.493806] Waiting for root device PARTUUID=ea993717-02...
[ 0.536903] random: fast init done
[ 0.549205] mmc1: new high speed SDIO card at address 0001
[ 0.594975] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[ 0.596079] mmcblk0: mmc0:aaaa SC64G 59.5 GiB
[ 0.598133] mmcblk0: p1 p2
[ 0.620900] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 0.620945] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 0.621585] devtmpfs: mounted
[ 0.628883] Freeing unused kernel memory: 2048K
[ 0.658180] Run /sbin/init as init process
[ 0.757973] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 0.940584] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 0.940600] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 0.940612] usb 1-1: Product: USB2.0 Hub
[ 0.942661] hub 1-1:1.0: USB hub found
[ 0.942970] hub 1-1:1.0: 4 ports detected
[ 1.034232] systemd¹: System time before build time, advancing clock.
[ 1.121974] NET: Registered protocol family 10
[ 1.123181] Segment Routing with IPv6
[ 1.159265] systemd¹: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 1.159928] systemd¹: Detected architecture arm.
[ 1.167884] systemd¹: Set hostname to <raspberrypi>.
[ 1.268020] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd
[ 1.399214] usb 1-1.3: New USB device found, idVendor=2040, idProduct=8265, bcdDevice= 1.00
[ 1.399229] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.399242] usb 1-1.3: Product: dualHD
[ 1.399254] usb 1-1.3: Manufacturer: HCW
[ 1.399266] usb 1-1.3: SerialNumber: 0014120208
[ 1.644052] systemd¹: /lib/systemd/system/xrdp.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/xrdp/xrdp.pid → /run/xrdp/xrdp.pid; please update the unit file accordingly.
[ 1.645685] systemd¹: /lib/systemd/system/xrdp-sesman.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/xrdp/xrdp-sesman.pid → /run/xrdp/xrdp-sesman.pid; please update the unit file accordingly.
[ 1.852916] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.862304] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.862757] systemd¹: Listening on udev Kernel Socket.
[ 1.863447] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.863983] systemd¹: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.870788] systemd¹: Listening on Syslog Socket.
[ 1.874952] systemd¹: Created slice User and Session Slice.
[ 1.875103] systemd¹: Reached target Slices.
[ 2.002941] i2c /dev entries driver
[ 2.499040] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 2.586363] systemd-journald¹³³: Received request to flush runtime journal from PID 1
[ 2.814928] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.153055] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
[ 3.153391] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.153638] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
[ 3.154201] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
[ 3.154690] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
[ 3.155360] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 3.155375] [vc_sm_connected_init]: start
[ 3.169865] [vc_sm_connected_init]: installed successfully
[ 3.182323] media: Linux media interface: v0.10
[ 3.209003] videodev: Linux video capture interface: v2.00
[ 3.239755] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.250805] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.266391] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 3.266428] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 3.284530] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 3.284562] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 3.302914] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 3.302962] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 3.307612] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.368407] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.409521] bcm2835_audio soc:audio: card created with 8 channels
[ 3.583458] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[ 3.593506] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.645569] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.688600] [drm] No displays found. Consider forcing hotplug if HDMI is attached
[ 3.688697] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[ 3.693088] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1
[ 3.693101] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.693111] [drm] No driver support for vblank timestamp query.
[ 3.693120] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
[ 3.731513] brcmfmac: F1 signature read 0x18000000=0x15264345
[ 3.745664] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 3.746266] usbcore: registered new interface driver brcmfmac
[ 3.801239] em28xx 1-1.3:1.0: New device HCW dualHD 480 Mbps (2040:8265, interface 0, class 0)
[ 3.801256] em28xx 1-1.3:1.0: DVB interface 0 found: bulk
[ 3.868106] em28xx 1-1.3:1.0: chip ID is em28174
[ 3.992548] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.007619] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2
[ 5.176157] em28xx 1-1.3:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x6de5c94c
[ 5.176171] em28xx 1-1.3:1.0: EEPROM info:
[ 5.176184] em28xx 1-1.3:1.0: microcode start address = 0x0004, boot configuration = 0x01
[ 5.183150] em28xx 1-1.3:1.0: AC97 audio (5 sample rates)
[ 5.183163] em28xx 1-1.3:1.0: 500mA max power
[ 5.183177] em28xx 1-1.3:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[ 5.247976] em28xx 1-1.3:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99)
[ 5.259800] tveeprom: Hauppauge model 204209, rev C2I6, serial# 14120208
[ 5.259814] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
[ 5.259828] tveeprom: TV standards PAL NTSC PAL SECAM PAL ATSC/DVB Digital (eeprom 0xfc)
[ 5.259839] tveeprom: audio processor is None (idx 0)
[ 5.259850] tveeprom: has no radio, has IR receiver, has no IR transmitter
[ 5.259868] em28xx 1-1.3:1.0: dvb set to bulk mode.
[ 5.328080] em28xx 1-1.3:1.0: chip ID is em28174
[ 5.786359] 8021q: 802.1Q VLAN Support v1.8
[ 5.890195] uart-pl011 fe201000.serial: no DMA platform data
[ 5.909624] random: crng init done
[ 5.909639] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.095255] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 6.318224] IPv6: ADDRCONF: wlan0: link is not ready
[ 6.318296] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 6.654469] em28xx 1-1.3:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x6de5c94c
[ 6.654476] em28xx 1-1.3:1.0: EEPROM info:
[ 6.654481] em28xx 1-1.3:1.0: microcode start address = 0x0004, boot configuration = 0x01
[ 6.661173] em28xx 1-1.3:1.0: AC97 audio (5 sample rates)
[ 6.661179] em28xx 1-1.3:1.0: 500mA max power
[ 6.661186] em28xx 1-1.3:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[ 6.662105] bcmgenet: Skipping UMAC reset
[ 6.727963] em28xx 1-1.3:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99)
[ 6.733428] tveeprom: Hauppauge model 204209, rev C2I6, serial# 14120208
[ 6.733435] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
[ 6.733441] tveeprom: TV standards PAL NTSC PAL SECAM PAL ATSC/DVB Digital (eeprom 0xfc)
[ 6.733445] tveeprom: audio processor is None (idx 0)
[ 6.733450] tveeprom: has no radio, has IR receiver, has no IR transmitter
[ 6.733458] em28xx 1-1.3:1.0: dvb ts2 set to bulk mode.
[ 6.758277] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
[ 6.758592] IPv6: ADDRCONF: eth0: link is not ready
[ 6.934389] usbcore: registered new interface driver em28xx
[ 6.973111] em28xx 1-1.3:1.0: Binding DVB extension
[ 7.031769] i2c i2c-8: Added multiplexed i2c bus 11
[ 7.031778] si2168 8-0064: Silicon Labs Si2168-B40 successfully identified
[ 7.031783] si2168 8-0064: firmware version: B 4.0.2
[ 7.056500] si2157 11-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[ 7.056552] dvbdev: DVB: registering new adapter (1-1.3:1.0)
[ 7.056560] em28xx 1-1.3:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[ 7.064832] em28xx 1-1.3:1.0: DVB extension successfully initialized
[ 7.064841] em28xx 1-1.3:1.0: Binding DVB extension
[ 7.077776] i2c i2c-10: Added multiplexed i2c bus 12
[ 7.077785] si2168 10-0067: Silicon Labs Si2168-B40 successfully identified
[ 7.077791] si2168 10-0067: firmware version: B 4.0.2
[ 7.087035] si2157 12-0063: Silicon Labs Si2147/2148/2157/2158 successfully attached
[ 7.087193] dvbdev: DVB: registering new adapter (1-1.3:1.0)
[ 7.087202] em28xx 1-1.3:1.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)...
[ 7.095586] em28xx 1-1.3:1.0: DVB extension successfully initialized
[ 7.095594] em28xx: Registered (Em28xx dvb Extension) extension
[ 7.114214] em28xx 1-1.3:1.0: Registering input extension
[ 7.115026] Registered IR keymap rc-hauppauge
[ 7.115300] rc rc0: 1-1.3:1.0 IR as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc0
[ 7.115374] rc rc0: lirc_dev: driver em28xx registered at minor = 0, scancode receiver, no transmitter
[ 7.115465] input: 1-1.3:1.0 IR as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc0/input0
[ 7.115488] em28xx 1-1.3:1.0: Input extension successfully initialized
[ 7.115495] em28xx 1-1.3:1.0: Remote control support is not available for this card.
[ 7.115500] em28xx: Registered (Em28xx Input Extension) extension
[ 7.768066] bcmgenet fd580000.genet eth0: Link is Down
[ 8.910295] si2168 10-0067: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 8.910304] si2168 10-0067: firmware download failed -22
[ 8.916661] si2157 12-0063: found a 'Silicon Labs Si2157-A30'
[ 8.966854] si2157 12-0063: firmware version: 3.0.5
[ 8.966893] em28xx 1-1.3:1.0: DVB: adapter 1 frontend 0 frequency 0 out of range (42000000..870000000)
[ 8.976648] si2168 10-0067: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 8.976650] si2168 8-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 8.976657] si2168 10-0067: firmware download failed -22
[ 8.976658] si2168 8-0064: firmware download failed -22
[ 8.982085] si2157 11-0060: found a 'Silicon Labs Si2157-A30'
[ 9.032283] si2157 11-0060: firmware version: 3.0.5
[ 9.032321] em28xx 1-1.3:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000)
[ 9.042344] si2168 8-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 9.042352] si2168 8-0064: firmware download failed -22
[ 11.909038] IPv6: ADDRCONF: wlan0: link becomes ready
[ 13.110101] Bluetooth: Core ver 2.22
[ 13.110139] NET: Registered protocol family 31
[ 13.110143] Bluetooth: HCI device and connection manager initialized
[ 13.110153] Bluetooth: HCI socket layer initialized
[ 13.110160] Bluetooth: L2CAP socket layer initialized
[ 13.110180] Bluetooth: SCO socket layer initialized
[ 13.120034] Bluetooth: HCI UART driver ver 2.3
[ 13.120042] Bluetooth: HCI UART protocol H4 registered
[ 13.120083] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 13.120191] Bluetooth: HCI UART protocol Broadcom registered
[ 13.372166] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.372174] Bluetooth: BNEP filters: protocol multicast
[ 13.372185] Bluetooth: BNEP socket layer initialized
[ 13.422282] Bluetooth: RFCOMM TTY layer initialized
[ 13.422302] Bluetooth: RFCOMM socket layer initialized
[ 13.422318] Bluetooth: RFCOMM ver 1.11