Project

General

Profile

No Muxes or services found.

Added by heino heino over 12 years ago

Hi there.
I have tvheadend running with an attached tevii s660 usb dvb-s/s2 adapter.
The adapter seems to be installed correct, but i can't scan anything in tvheadend.

dmesg tells me this.

[   14.360601] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[   14.528396] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[   14.739885] dvb-usb: found a 'TeVii S660 USB' in warm state.
[   14.741233] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   14.889001] dvb-usb: MAC address: 00:18:bd:5b:63:67
[   14.896363] dvb-usb: schedule remote query interval to 150 msecs.
[   14.896368] dvb-usb: TeVii S660 USB successfully initialized and connected.

and i can do a "scan /usr/share/dvb/dvb-s/Sirius-5.0E | tee channels.conf" and find channels.

i have tryied adding dvb network by location, but all myxes just drop to 0% and find nothing. when adding muxes myself i get thsi error in tvheadend

Apr 28 11:49:13 dvb: "/dev/dvb/adapter0" tuning via s2api to "12,073 kHz Horizontal (Default (Port 0, Universal LNB))" (9737927, 27500000 Baud, 3/4, SYS_DVBS2, QPSK)
Apr 28 11:49:13 dvb: "/dev/dvb/adapter0" tuning to "12,073 kHz Horizontal (Default (Port 0, Universal LNB))" -- Front configuration failed -- Invalid argument, frequency: 9737927

in the tv adapter settings i this info on the tuner

Hardware
Device path:
/dev/dvb/adapter0
Device name:
Montage Technology DS3000/TS2020
Host connection:
USB (480 Mbit/s)
Intermediate Frequency range:
950000 kHz - 2150000 kHz, in steps of 1011 kHz
Symbolrate range:
1000000 Baud - 45000000 Baud
Status
Currently tuned to:

Services:
0
Muxes:
0
Muxes awaiting initial scan:
0

where do i go from here ?

thank you
Heino


Replies (1)

RE: No Muxes or services found. - Added by heino heino over 12 years ago

when i do a w_scan it does scan channels. Then i use szap to test stream which gives me this...

heinobl@xbmc:~/.szap$ szap GODChannel
reading channels from file '/home/heinobl/.szap/channels.conf'
zapping to 16 'GODChannel':
sat 0, frequency = 11996 MHz H, symbolrate 27500000, vpid = 0x0fdd, apid = 0x0fde sid = 0x0fdc
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal 9088 | snr e128 | ber 00000000 | unc 0000000b | FE_HAS_LOCK
status 1f | signal 9088 | snr e128 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 9088 | snr e128 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

and then do this

heinobl@xbmc:~/.szap$ dvbstream 0x0fdd 0x0fde -o > test1.mpeg
dvbstream v0.7 - (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://www.linuxstb.org/
dvbstream will stop after -1 seconds (71582788 minutes)
Output to stdout
Streaming 1 stream

even though it tells me that its' streaming one stream test1.mpeg still remains at zero size. Not sure if this means that it's just a pay channel or if there is something wrong with the tuner.

anyone have any idea ?

thank you
Heino

    (1-1/1)