Project

General

Profile

Forums » General »

Greece channels missing

Added by M O over 4 years ago

Hi.
In Greece state owned channels use their own transmitters and private ones use DIGEA.

Unfortunately only the private ones tune-in using muxes Greece:Athens. I was not able to tune-in to the state owned (ert1, ert2, ert3, vouli, ertsports hd live) no matter what muxes I used.
Just a note that tvheadend was able to tune-in all channels (state+private) a few months ago. Not any more.

Any chance of fixing this or any suggestions on how I should go about would be appreciated.

Using tvheadend 4.2.8-3 on an archlinux box.
USB DVB is Afatech Rtl2832UDVB

Thanks in advance.


Replies (5)

RE: Greece channels missing - Added by saen acro over 4 years ago

Update to 4.3

Afatech cannot contan Rtl2832U tuner,
Afatech make his own tuners (AF9015 AF9035)

RE: Greece channels missing - Added by M O over 4 years ago

Well here it is.

lsusb

Bus 001 Device 002: ID 1b80:d3a4 Afatech Rtl2832UDVB

I will upgrade to 4.3 when it becomes available in aur.

Thanks

RE: Greece channels missing - Added by saen acro over 4 years ago

M O wrote:

Well here it is.

lsusb

Bus 001 Device 002: ID 1b80:d3a4 Afatech Rtl2832UDVB

I will upgrade to 4.3 when it becomes available in aur.

Thanks

AFATEC not AFATECH

1B80:D3A4 = Afatec Twintech UT-40 / auvisio DV-Stick 252.pro
https://doc.ubuntu-fr.org/rtl2832u

RE: Greece channels missing - Added by M O over 4 years ago

Thanks for the reply. AFATECH is what lsusb returns and little I can do about it. Not that it matters anyway.

If I understand correctly, you are suggesting to build a different module than the one used (currently dvb_usb_rtl28xxu) which exists in the kernel 5.4 and all kernels backwards to 414.

The module your link refers to, does not build. And my box will not boot with 316 (thankfully).

Anyway, thanks.

Maybe a solid solution will surface from others.

RE: Greece channels missing - Added by saen acro over 4 years ago

No you do not understand
first Someone is described device wrongly adding one more leter (not a first time)
second are you shure that frequency and parameters are corect?
post result

w_scan -f c -x

    (1-5/5)