Multiple TVH servers for one front end
Added by Spencer Cummings over 5 years ago
Hi all,
TVH Version: 4.2.4-dmo1~bpo9+1~rpt1
OS Version : Raspbian Stretch Lite
From where : Not compiled myself, apt get install (from what I remember)
Tuner : Sony CXD2880 (on both Pi)
Problem : As follows
I have TVH set up on a Pi 3B using a TV hat as the tuner and after some fiddling that's working very well.
I had planned to have another Pi, also with a TV hat, set up and have a kind of master/slave arrangement.
Both servers would be set up to use the same aerial via a splitter and be seeing the same muxes, channels, etc.
The idea would be that the front end (OSMC on yet another Pi) would talk to the master, which would work out where the recording or live stream was going to come from.
I thought when I looked at options for backend and settled on TVH I saw a way to do this, but for the life of me cannot find it now.
I think I can do it via SAT>IP but I'm struggling to find much in the way of information on how to set it up and/or if it will actually do what I'm trying to achieve.
So, my questions are:
1. Is this the right way to do it or am I better off with a beefier Pi (3B+) and multiple tuners attached?
2. If the answer to 1 is either 'yes' or 'no reason not to', do I use SAT>IP?
3. If the answer to 2 is yes, could someone point me towards a guide/comment that would help?
4. If not, how can I achieve it please?
Thanks in advance, and apologies if this is out there and obvious and I've just been dense and missed it!
Replies (5)
RE: Multiple TVH servers for one front end - Added by Spencer Cummings over 5 years ago
Folks,
Anyone out there that can help?
Thanks
RE: Multiple TVH servers for one front end - Added by Dave Pickles over 5 years ago
1. Is this the right way to do it or am I better off with a beefier Pi (3B+) and multiple tuners attached?
It would be simpler to go for a single Pi. I use a Pi2 v1.2 (basically a slowed-down Pi3 without WiFi) with dual tuners; I needed a powered USB hub to feed the tuners and the HDD but I can record two HD channels at the same time (never tried more).
I tinkered with a master-slave sat>ip setup but don't claim any special knowledge of the arrangement.
RE: Multiple TVH servers for one front end - Added by saen acro over 5 years ago
Add them as auto network with * user and pass
or
Start sat>ip server and connect them to master sat>ip client.
RE: Multiple TVH servers for one front end - Added by Spencer Cummings about 5 years ago
Thank you both for the replies, as you probably noticed by the lack of response I got distracted by other things!
Dave, I may well go down that route in the end but have the zero sitting there with it's TH Hat all ready to go, so might just tinker for a while...did you use a guide of any sort to get ot configured?
Saen, could you elaborate on the 'auto network' option please?